Question about M-Audio Audiophile 2496 Soundcard for Computer Recording/Playback
My M-Audio Audiophile 2496 (that use Envy 24 chip) works only when I set it to external clock with a digital device connected to the SPDIF input. The Kmix (KDE mixer application) "see" a lot more inputs than the card really has... (Maybe all Envy 24 chip internal input including the ones unused by the soundcard). That's really confusing! Is there a block diagram available some where that could help me to figure out the right setups for using the Audiophile 2496 under LINUX?
I've ran the audio in on my sound card to my mixer and had the guitar on the mic in. I've also ran the line in to a small cracker amp. Keep it turned down. If I would directly connect it use an adaptor. I haven't tried using a 1/4 to 1/8 adapter and directly connected to it as I wanted to control the tone. I don't see why it wouldn't work. Keep everything muted and turned all the way down when you first connect it. Then start raising volumes slowly I will try and report back As far as spdif you're just recording analog to digital conversion. I get more realisitc sound just keeping it analog til it hits my line in. Have a quality sound card. Not some walmart special. I use Adobe Audition 1.5 to multichannel record.
Posted on Sep 09, 2008
Tips for a great answer:
Jun 03, 2011 | M-Audio Audiophile 2496 Soundcard for...
Sep 25, 2010 | M-Audio Delta 66 Sound Card
Jul 10, 2009 | M-Audio Audiophile 2496 Soundcard for...
Jun 10, 2009 | M-Audio Audiophile 2496 Soundcard for...
Oct 13, 2008 | M-Audio Audiophile Sound Card
Dec 23, 2007 | M-Audio Firewire Audiophile 2496 Sound...
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: