Question about Kenmore 98702 Stacked Washer/Dryer

1 Answer

Smelled burnt, now won't wash

My washer fills with water but won't do anything else, is it the belt? i smelled like burnt rubber

Posted by on

  • cdavies177 Jan 07, 2009

    I have the exact same problem.  Sometimes when i re-set the breaker at the outlet it will start working again but not this time.  Does anyone know what this is?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your belt has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer squealed, gave off black smoke in spin cycle


For sure change the belt. Clean the pulleys with a solvent to remove anything oily or like melted belt. The machine probably was overloaded. If it's a front loader, check the bearings.

Nov 24, 2013 | Washing Machines

1 Answer

Whirlpool stylemaster washer just totally stopped...


check to lid switch make sure it is pressed down by the lid...let meknow

Sep 18, 2009 | Washing Machines

1 Answer

Burnt Rubber smell and spin cycle didn't work


the main motor needs to be serviced , sounds like the couplings broke , hope this helps , AJ

May 18, 2009 | Maytag Dependable Care LAT9416

1 Answer

Washing machine was making noise when agitating & spinning


This sure sounds like a bad transmission. Turn the transmission by hand to feel and listen to it. It should be smooth and quiet.

May 04, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Fills with water, agitates, won't drain


how to replace the Maytag belt at this location
http://www.repair-help.com/kb/index.php?article=187

Diagrams and belt orders here http://www.pcappliancerepair.com/model-display.php

Dec 05, 2008 | Maytag Atlantis MAV6451 Top Load Washer

1 Answer

Washer stopped filled with water, smells like burnt plastic


REPL/ PUMP BURNT PALSTIC SMELL ,AND RUBBER SMELL, ONCE REPL./ SHOULD FIX

Nov 29, 2008 | Maytag Atlantis MAV6000 Top Load Washer

2 Answers

Own a Maytag Washing Machine Model No. LAT9416AAE I overloaded with a extra large comforter. I started the cylce and went upstairs to my room leaving it unattended. My parents were down stairs With it, and...


there is a thermal overload protector in the motor. After the motor cools it should restart. There is an off balance switch that might have been tripped when pulling out the comforter or when bailing out the water. As for the belts, tip the machine back and you will see the belts underneath the washer. Very easy to change and you'll see what I mean when you see the belts. That should solve your problem. AND DON'T OVERLOAD THE WASHER AGAIN.

Feb 27, 2008 | Washing Machines

1 Answer

WASHER FILLS WITH WATER THEN IT SITS THERE FOR AWILE AN DRAINS THE WATER BACK OUT DOESNT WASH OR SPIN JUST FILLS AN EMPTYS????


sounds like a belt problem. if you're not smelling burning rubber (belt) either the belt has come loose or broke

Nov 11, 2007 | GE WJRR4170E Top Load Washer

1 Answer

Burnt rubber smell


the belt is broken. the machine wont spin or agitate with a broken belt. set the timer to spin and the water should still drain. but not spin. belts are very cheap but replacing on could be tricky if you dont know what your doing

Jan 24, 2007 | Maytag Performa PAV2200

Not finding what you are looking for?
Kenmore 98702 Stacked Washer/Dryer Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...