Question about Argus DC-3185 Digital Camera

Open Question

DC-3185 Frozen A really odd problem is my son's DC3185 is frozen with a live LCD and the Flash in auto mode except the flash icon "flashes" I see a good LCD image of what I am looking at but can not take a picture. The led light is also red. I have installed new batteries and it didn't help. I inserted a flash card and the screen indicated the Flash icon but the flash keeps flashing on and off and the red led light stays on. When I plug it in to a USB port I get the computer to see it as a external drive (2 drives is the flash card is in the camera). My device list also does not show this camera, nor does the PhotoImpression 4 software see the camera. It is only seen as a drive. I hope this is enough information for someone out there who can help me. Thank you.

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: argus dc 3185 digital camera

how do i remove the dates?? anybody know???

Posted on Jul 08, 2008

Ad
ginko
  • 19396 Answers

SOURCE: dont have installer cd to instal argus dc 1510

Here is the link to argus download.

Select: Download Drivers on first box >> Discontinued Cameras on second box >> DC1510 on last box to the right.

Download and install.
Keep camera unplugged when you begin to install.

Posted on Aug 16, 2008

SOURCE: my camera argus dc-5195 doesn't turn on it works plug in the computer i try changing the batteries and nothing

ok the problem is that you kniow the thinki tha sayys + and - in there that litle metal can cause the problem or some wire maybe disconected.

Posted on May 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How di I manually pop open the flash


Press the OPEN (flash) button.
This button is on the side of the camera just below the flash.

The flash mode button (lightning icon) is at the lower left on the rear of the camera.
This only changes settings when the flash is up.
This cycles through Auto, red-eye reduction, forced flash and no flash.
The mode shows in the finder or the LCD screen.
AUTO mode does not show.

Oct 20, 2014 | Sony Mavica MVC-FD95 Digital Camera

4 Answers

Hello, I have a sony DSC-T70 and I cant change the flash options. i should be able to select the flash icon and choose my flash setting, but the only setting is no flash. I really want my flash to work...


hello

Have you consulted the manual in this?

http://129.33.22.12/release/DSCT70.pdf

pages 15 to 18

But in any case I beleave you first need to set your camera into the PROGRAM AUTO mode
13df56d.jpg After you have set your camera to program auto you should be able to change the flash settings as below

743eb9d.jpg
Let me know if you need more assistance.

May 01, 2008 | Cameras

2 Answers

How do I disable the pop-up flash on Nikon D5000? Thanks


As long as jog dial is set to M or manual, the flash will not pop up automatically. Be reminded though because you have to set everything manually. If you want the auto settings without the flash, set the jog dial to the icon that looks like a lightning with stop/ no sign

Mar 02, 2011 | Nikon D5000 Body Only Digital Camera

1 Answer

How do I turn the flash OFF?


If in Auto, you can't turn off the flash, it will fire automatically if it's needed. You need to be in any mode other than "Auto". Try Program "P" mode, which is similar to Auto, except it allow you to turn off the flash (plus allows some other minor mods). Then press the lightning bolt button on the back of your camera until you see the icon with a slash through it to indicate that it's been turned off.

Mar 03, 2010 | Canon PowerShot SD790 IS/ IXUS 90 IS...

1 Answer

How do you turn the flash on? (with the vivitar vivicam 8018)


Your camera has a built in flash function which enables you to take photos when the light condition is not good.

1. Press the Up button. (for reference of buttons, please see the below figure mentioned)
2. Press the Up button once until you see the icon appear on the LCD screen. This indicates that the flash is forced on.
3. Press the Up button again to change to the auto flash function.
4. The icon will appear at the top of the LCD indicating that the auto flash is turned on and ready to use.
5. Press the Up button again to change from the auto flash to the red eye function.
6. The icon will appear on the LCD indicating that the red eye reduction function has been activated.
7. To turn off the flash function, press the Up button again until the icon is displayed on the LCD.

Note: A “Low Power” message will appear on the LCD screen, if you select the flash function when the battery power is insufficient. To continue using the camera with the flash, please change new batteries

2f56b61.jpg





Feb 13, 2010 | Vivitar ViviCam 8018 Digital Camera

1 Answer

My pentax optio m20 will not flash.have i turned it off


At the back of your camera, there is a circular button and a flash symbol on it. Pust that button it will circulates through "Auto, Flash-off, Flash-on, Red-eye reduction" modes. As you see those modes displayed on the LCD screen of your camera, chose one of them as you wish
(in this case chose the one except "flash-off" mode ofcourse) :)

Jul 08, 2009 | Pentax Optio M20 Digital Camera

1 Answer

Flash will not atomatically flash/can't change flash setting


Do you see any flash error code on lcd screen? if no then...
Flash will work when camera will set on auto mode ( green mark on jog dial) and you will see flash icon on lcd screen.

Dec 12, 2008 | Cameras

5 Answers

G9 flash


My flash doesnt work either. Holding the flash button down doesnt do anything either (in program mode)

Apr 08, 2008 | Canon PowerShot G9 Digital Camera

1 Answer

How do I turn my flash off on my samsung digimax 4010


You don't say which model Digimax you have. Hopefully this will cover most models.
First, make sure the menu is not being displayed on the LCD monitor, otherwise you'll just move around in the menu screen. You must also be in photo record mode, ready to take a picture (not in playback or movie mode).
There is a button (usually on the left side of the direction pad) that looks like a lightning bolt. I can't remember the exact number of times you must press it, but the display should indicate that the flash is turned off as one of the options as you cycle through them.
Depending on your model, the modes are likely to be Auto Flash (bolt with an "A" icon), Auto with Red-eye reduction ("eye" icon), fill flash - always on ("bolt" icon), Slow sync (bolt with an "S" icon), and flash off (bold with a line through it icon).
Also depending on your model, you may not be able to turn the flash off depending on which recording mode you're in. For instance, you can't turn the flash off if you're in the "Backlight" recording mode.

Dec 13, 2007 | Cameras

1 Answer

Flash Problem


Using the flash When shooting with the built-in flash, open the flash manually. The flash does not pop-up automatically. The flash will not fire if it is closed. The flash will work when it is opened up. When the flash is open, the (flash on) icon or (automatic) icon will appear on the LCD monitor (or in the viewfinder). Flash on: The flash fires in every shot. Automatic: The flash fires automatically. Press the (flash) button to switch between the and flash modes while the flash is open. In some shooting modes, the flash mode does not switch even if the flash button is pressed. Please refer to Functions Available in Each Shooting Mode in the Camera User Guide provided with your camera for more information. When you are not using the flash, close it manually. When the flash is closed, the flash will not fire and the icon appears on the LCD monitor (or in the viewfinder).

Aug 31, 2005 | Canon PowerShot S2 IS Digital Camera

Not finding what you are looking for?
Argus DC-3185 Digital Camera Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Argus Cameras Experts

Marvin
Marvin

Level 3 Expert

81342 Answers

Computer Links

Level 3 Expert

2386 Answers

Philip

Level 1 Expert

11 Answers

Are you an Argus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...