Question about Philips 43PP9202 43" Rear Projection Television

1 Answer

Phillips DPTV305F HDTV No Picture, No Sound, Steady Chirping

Friedn gave this to me, it is a 2004 and the # above is the chassis number. When you turn it on it gets a power light, responds to the remote but has no sound or video other than a continuous chirping noise. I have the service manual and schematics, I tried to get into the SDM mode to check the LED for error codes but did not get any response. Can this be many things or can you suggest a certain area to zoom in on and check voltages etc. I have found no obvious capacitor damage, no blown fuses or burn marks. I have an electronics degree but no nothing about tv's so I am obviously dangerous, lol. Thanks ahead of time. I am in the Reno are if anyone is available to help out for compensation of course. Let me know if I can provide more info.

Posted by on

  • 3dfam Jan 18, 2009

    Ordered the repair kit. Removed and installed the two new chips and 12 resistors. TV works GREAT!! I can not thank you and this site enough! It was easy to order the kit, even used Paypal, kit came in two days, it took about three hours total, thats taking the tv apart, desoldering everything, installing and soldering all the new, putting back together. Didn't even have to adjust anything. THANK YOU, THANK YOU. I just got an HDTV for $70.00



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Philips Master
  • 3,459 Answers

Common problem when the convergence chips short out. Goto and get their "chirping set" repair kit.  It includes the parts and instructions to repair the set. 

Posted on Jan 11, 2009

  • Edward
    Edward Jan 18, 2009

    Thanks " 3dfam"

    Glad to hear that the repair kit I suggested worked. 

    Take care



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Philips HDTV 60pp9202/17f chassis: DPTV305F picture has problems. It appears "fuzzy" and "cloudy". I've tried to go to picture options and adjust the tint,sharp,brightness, etc.. and havn't come to the...

Thats indicating that the coolant in the three CRT's need replacement. The phillips CRT coolant kit is available from which contains the coolant and the CD with instructions.

Aug 09, 2010 | Televison & Video

1 Answer

Broken GE HDTV - Need Help To Fix

The deflection board needs replacement. The chirping is indicating the deflection circuit has an issue. You can get a replacement deflection board from which includes instructions on how to remove and replace the board.

May 26, 2010 | GE D52GW12 52" Rear Projection HDTV-Ready...

1 Answer

Philips 60pp9202 I get no sound, no picture and a chirping noise

Chirping in a phillips is usually related to the HOT ( Horizontal Output Transistor) or the Flyback ( HV Generator having a issue.

Dec 11, 2009 | Philips 60PP9202 60" Rear Projection...

1 Answer

No Picture

I had the same exact problem pulled the chassis ohmed the convergance ics though one read different than the other replaced both put chassis back in set fired right up.Hope this solves your problem!

Feb 15, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

Power problem

What is the chassis number to your set. Have to go by chassis numbers on phillips/magnavox and RCA tvs.

Feb 10, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

TV makes chirping noise, won't turn on!

That usually means a problem in the start up or deflection circuits. Diode, Horizontal ouput or driver transformer. What Chassis is this set, and I will be ableto give you some better information. Rca , GE and phillips need to be diagnosedwith the chassis number. Let me know the chassis.

Jan 25, 2008 | Televison & Video

Not finding what you are looking for?
Philips 43PP9202 43" Rear Projection Television Logo

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76016 Answers

matt martin
matt martin

Level 3 Expert

1255 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides