Question about Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag top loader washing machine

I have a maytag top loader washing machine about 6 yrs. old, just recently the cycles work fine and the tub does agitate but the tub doesnt agitate in the spin cycle and doesnt drain all the water out properly and the washing machine continues to run even when the door is up in the middle of a cycle where as before if i opened the lid the machine would stop. please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 640 Answers

I believe i can help you,,but washers dont agitate in the spin cycle,,i believe you ment it wont wring or spin in the spin cycle..your lid switch is defective,,replace,,if need be i can talk you though,,onthejob

Posted on Jan 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Agitator is slipping on wash cycle every thing else is working fine where should I look for the problem. Machine is Maytag Performa PAV3200AAW Rev 12


If the drive belt is worn or loose, that could cause your problem.
drive belt is on the bottom of top loader
and behind front loader.

Nov 14, 2012 | Maytag Washing Machines

1 Answer

My GE top load washer is about 5 months old. It fills up and runs through the agitation cycle but then stops at the end spin cycle. The clothes just sit in the water. I checked the hose for kinks and...


I have had this problem with two of my previous washers a top loader and front loader.Each time it was a faulty pump that drains the water from the tub after the wash cycle is complete. If the water does not drain from the tub the machine will not go to the spin cycle. Both of my washers were 5 or 6 years old when this occurred. If the washer is only 5 months old it should be under the manufactures warranty. Good Luck.

Nov 12, 2010 | General Electric WBB2090G Top Load Washer

1 Answer

Maytag Performa top loader is making grinding noises


The agitators are a pop-on fit. Make sure that the agitator is firmly seated on the shaft. Lift it up and if it moves easily adjust it to the splines on the shaft and press it back into place.

Jul 29, 2009 | Maytag Performa PAV3200

1 Answer

Maytag Legacy Series Top Load Washer model SAV515DAWW splashing


the agitator dogs are likely broken.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 10, 2009 | Maytag Legacy Series Top Load Washer

2 Answers

My maytag top loader washer won't spin but agitates,what is the problem


Maybe a sock stuck between the two tubs. If it has not dropped down too far you maybe able to feel it. Open the lid and pass your fingers gently between the two plastic tub covers. The lower cover moves with the inner tub while the upper stays still.

Jun 21, 2009 | GE WBSE2090A Top Load Washer

1 Answer

Tub rotates CW during agitation, out of balance, hits side of metal cabinet, but no error code



Hello srcoray,

Did you replace the clutch, just trying to get a feel for your hands on experience with the machine? If you did the work did your machine use the upper roller clutch bearing along with the clutch pulley mounted roller clutch bearing?

The FAV6800AW uses a reversing motor and motor controller that powers the motor and clutch pulley to rotate CW in Wash/Agitate cycle and CCW in Spin Cycle.

In Wash/Agitate cycle the roller clutch bearing should rotate freely CW allowing the agitator shaft to drive the transmission in wash cycle driving the tumblers to rotate only not the wash basket. In spin cycle the roller clutch bearing will lock up (one-way roller clutch bearing) driving the spinner shaft to rotate the wash basket and transmission CCW. Unless my thinking is wrong it sounds like the one way roller clutch bearing is frozen or dragging and not rotating freely in wash cycle rotating the wash basket CW. I’m an owner like you and will try to help.

Just a few other questions;

If you have a load of wet clothes in the wash basket and you select Spin Only cycle will the spin cycle complete with out dc/UC errors?

With the lid raised can you rotate the wash basket CW? It should not; it should only rotate CCW and do that with very little resistance.

Rich

May 22, 2009 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Ge top loader washer agitator does not work


To check the agitator. Start the washer into wash cycle. Once started Push down on top of agitator. If it catches some times or all of the time when pushing down, then then doggets are worn, under the agitator. You`ll have to remove the agitator to see these. If by pushing down on the agitator, nothing changes, Then you probably have a transmition problem. Check this and let me know what you find.

Nov 27, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Maytag legacy series washer top load-squeaky during wash and rinse


very possible if squeaks in agitation top springs that hold tub needs greased under spring & plastic shield under spring. had same problem on big front loaders whirlpool

Aug 31, 2008 | Maytag MAH2400A Front Load Washer

1 Answer

Maytag top loader washer


The brakes are probably stuck or the cam that releases them is damaged

Sep 27, 2007 | Washing Machines

3 Answers

Maytag A108 27 years old


It sound like Transmission Problems,Bury it and give it a Decent Burial, Dont Forget to Give Thanx.....ttech

Jul 23, 2007 | Maytag SAV5701A Top Load Washer

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

605 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4638 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...