Question about Philips 28PW6506 28" TV

3 Answers

Dead Philips 32PW9545 TV

Hi, I have a problem with my Philips 32PW9545 TV. The problem started when the picture and sound suddenly disaperd. Now when I try to start the tv all over, The only thing that happends is that I hear a sound from what I think is a relay. And after that the Power LED starts to flash red and newer stops. No Picture, no sound, nothing. Do you konw what the problem can be? Is this expensive? Regards /Jonas

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers
Re: Dead Philips 32PW9545 TV

My set was not starting and kept going into standby mode. sorted the problem on my set. Replaced the capacitor ref: 2455 on main board it is a 47uf 25v but i was told a 35v will work as well?

Posted on Nov 17, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 326 Answers
Re: Dead Philips 32PW9545 TV

Hi there, remedy Replace relay 1010. remedy 2 Replace relay 1002. If you need more info please advice

Posted on Apr 24, 2007

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,070 Answers
Re: Dead Philips 32PW9545 TV

The problem is in the power supply or related a tech to look at your should not be expensive to fix maybe between $40.00 to $100.00 good luck

Posted on Apr 24, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sir hamari tv ka name thonson hai na hi light

As sound and picture are absent. your TV is in dead condition we can say.
That is there is no power gets inside your tv. All modern TVs have built in SMPS stabilisers. A sudden overvoltage, lightning etc can make harm to power supply system. We cannot predict the exact point of fault at this time. It is best for you to contact a service personal nearby. Sometimes a fuse inside may have blown up. Never try to repair it by yoursef, since orginal spare parts of Thomsun 24"TV is very difficult to get in India.

Oct 19, 2010 | Thomson 24WK25U 24" TV

2 Answers

No sound, no picture. tried unplugging and plugging back in...same problem. the green power light just keeps blinking 14 times over and over again. tv is around 11 yrs magnavox 32" smart...

check your h-out transistor, in high voltage area, capacitors and resistors, need reservicing and resoldering....hope you can do it, or check out with qualified tech

Oct 25, 2009 | Philips Magnavox TS3260C 32" TV

1 Answer

Sudden death

Take out ur antena,cable ect.. input have any noise.Or tv could have dead video.

Aug 16, 2009 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Philips 21PT3832/71R

 change your option code

Sep 07, 2008 | Philips 20PT643R 20" TV

1 Answer

NO Picture, No Sound

might be the picture tube,have it checked by a tv repair man

Jul 29, 2008 | Philips Magnavox 20MS233S 20" TV

1 Answer

Picture fails


sounds like a high voltage issue, it will have to go in, i dont recommend self servicing that. may sound strange but Ive seen several tvs go by way of spouse having a plant above or near the tv, that person watering it and a few hours later mad spouse sitting in front of a busted tv that sounded just like that. also I had a cat that sprayed one and it did that. just a couple ideas for ya.


Jul 12, 2008 | Philips Standard (CRT) Televisions

1 Answer

Philips 27PT6441/37

There is a install kit 483531057673 for this model when the set is dead. The kit will contain 7404 and the Horizontal Driver Transformer 5402 along with resistors that will limit stress on 7404 and includes complete instructions

May 03, 2008 | Philips 27PT6441 27" TV

1 Answer

Bright line coming in center of screen

Hi Shailendrar , your problem sounds like vertical collapse , the whole picture has collapsed into a thin , very bright centre line ? maybe the result of dry solder joints , does banging on the side of the tv temporarily fix ? if so , the circuit board requires inspection for bad solder joints . Alternately the vertical chip/transistor may be blown , replace as required. Cheers T

Dec 05, 2007 | Philips 19PR19 19" TV

2 Answers

Sony KV32s45 sudden failure

heard a pop sound -- then the set went dead -- no lights, no nothing, and then there was a slight electrical burn smell coming from the back of the set :(

It's an old 32" set

Nov 19, 2007 | Sony KV-32S45 32" TV

1 Answer

No picture and no sound,

Something shorted and shut your set down. Most likely the high voltage transformer shorted which also shorted the horizontal output transistor. Stargazer

Aug 01, 2007 | Sony FD Trinitron WEGA KV-27FS100 27" TV

Not finding what you are looking for?
Philips 28PW6506 28" TV Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Standard (CRT) Televisions Experts

Sp Gupta

Level 3 Expert

655 Answers

Jim Evans

Level 2 Expert

186 Answers


Level 3 Expert

485 Answers

Are you a Philips Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides