Question about Projection Televisions

Open Question

New LCD 32 inch Broksonic model CCVG-3276 SERIES D

It lose the video and later lose the audio too, it is only 6 month old, it is a gift I sent to my mother in Cuba, is a 32 inch LCD TV Broksonic, model CCVG-3276 SERIES D, I called the 1 800 number on the company website and it is not working, I need to find replacement parts to send there, any sugestion is gratly appreciate it, my email address is: jorgemurillo1@yahoo.com Thanks

Posted by on

4 Suggested Answers

  • 3 Answers

SOURCE: RGB-PC input problem?

you need to buy a tv converter .i have a... trust televiewer 1600 and it works fine you do need a s video cable and a mini jack audio cable to plug in where your speakers would normaly go. hope this helps

Posted on Jul 26, 2007

  • 1 Answer

SOURCE: BROKEN TECO TV

14 weeks for my tv to get repaired and still not done ,WAITING FOR PARTS what rubbish.STAY CLEAR OF TECO

Posted on May 27, 2008

Slinteriors
  • 8617 Answers

SOURCE: my maxim LCD tv power board number 05TA071B has burn how do l get

You can get the repair kit which will have the parts you need at this link, or they will rebuild your board for you.
http://www.ohmsupplies.co.uk/epages/62027733.sf/en_GB/?ObjectPath=/Shops/62027733/Products/KIT02

Posted on Jun 17, 2009

ladywinn
  • 5138 Answers

SOURCE: My unit WD 65731 will not show any video and its

LAMP# Call Mats 1-800-628-1118

Posted on Feb 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sony 50 inch LCD projection TV model KDF - 2000 when I turn on light goes green and blinks 4 times and then it goes to the red light and it blinks and 3 time series


Usually that means the lamp is bad. If the lamp is new, then try re-seating the cage/housing. If its more than 3 years old, then I would buy a new lamp. www.projectorlamps.com

May 27, 2015 | Sony Projection Televisions

1 Answer

Toshiba HD ready TV ct 90158 makes high pitched sound


A high pitch sound can be a capacitor losing power it would sound a bit like a fire work. most have back up on the board but it put more pressure on them the more times you use the tv. would check them and replace. all of them can be 5 in a row in some models.

Oct 23, 2013 | Toshiba Projection Televisions

1 Answer

Have a Samsung 32 inch lcd tv 720p only a year old tv will not come on but power button is lit up


Most likely defective capacitors on the power supply module. Every model of LCD has this issue so don't feel Samsung is a inferior product. It is an excellent product.

Nov 27, 2009 | Projection Televisions

2 Answers

My zenith 52 wlcd-tv will not come on.


We had the same problem and cost 374 dollars and the remote control thing in the TV was replaced in our 52 inch projection tv (about 6 years old). Now it does not turn on with the cable remote. 2 months later now the tv (on its own starts to flip channels and the volumes goes up and down even when the all the remotes do not have batteries in them.

Feb 03, 2009 | Zenith R57W46 57" Rear Projection...

1 Answer

Panasonic 36 inch flat screen tv 6 years old (model unknown) just stopped turning on. Act as if it is unplugged. Could it just be the fuse? If so, where is it located and how do i replace?


Fuse sounds right.  Had a Toshiba 32" that did the same thing.  Had to have a repair man come out.  $150 charge all told.  Worth it, because a new TV would be a lot more.  Unless you are some kind of electronics wizard, you don't want to take that thing apart.  They are very delicate-looking inside (and really cheap-looking, actually!).

Nov 15, 2008 | Panasonic Projection Televisions

1 Answer

I have owned my Samsung 32 inch LCD TV for about 18 months. Now when I turn the unit on there is a yellow haze on the picture, it sometimes goes, but not for long. Please can someone help me diagnose the...


I would expect a bad connection to cause this symptom. If you can tap the sides or top of the TV and get it to go away, It might indicate a bad solder connection in the video circuits. You are losing the red component of the signal, and the blue and green when mixed together will give you yellow.

Apr 18, 2008 | Projection Televisions

1 Answer

My philips 32 inch tv which is fifteen years old the tv works and then it cuts the video goes but the audio stays on then it will come back and then the video goes and becomes a black screen i know the tv...


your flyback transfomer may need to be solder around pinns or you have a bad capacitor in high voltage circuit.ThankYou for trying FixYa. Have a Nice Day. Call the repair shops see what they would charge to fix it.

Feb 20, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...