Question about Kenmore 24032\24036 Top Load Washer

1 Answer

KENMORE MODEL 80 WASHER

YOU TOLD ME TO TRY THE LID BUT HOW WILL I KNOW IF IT IS BAD.
I DO NEED HELP CHANGING THE SPROCKET IF THAT IS THE PROBLEM

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 640 Answers

You should see a little switch on the top when you open lid,stick a pencil,,or pen,,and push down on switch,,your listenins for a click,,than take lid and open and close the lid,,and listen for the click,,you should see a probe on lid botton,,if not then its hooked to hinge ,,we will work on coupling if need be..

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

80 series model#26852504. just replaced the trans and now i have to open and close the lid to get the drum to spin


I don't get cold water in the washer. I even changed my water inlet valve. I don't know what else I have to look for. Please post me the solution. The model is Kenmore 80 series-110 26852504

May 17, 2011 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore Mod# 110.25842400 lid switch


The following link gives you step-by-step instructions on how to replace a lid switch on a Kenmore top loader:

http://www.fixya.com/support/r385198-replacing_lid_switch

If you have any questions about this repair, please let me know. I hope this helps you.

Jul 15, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Series 80 kenmore washer, agitates but won't drain or spin


Hi, There is a good chance the lid switch is going bad. When in the spin cycle, does the motor run at all? If the motor does notrun, you will need to test the lid switch first.
Please get me a model# so I can look this model up.

Thanks
Vic

Jun 13, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Apparent lid switch problem


yes , they are the same.
both are kenmore/whirlpool makes.
Phil

Jun 11, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washing machine 80 Series 110 20802 990 Will not agitate or spin"


You need to replace the Kenmore Washer Lid Switch. I had the same problem so being lazy I would just push down on the washer's lid and it would push the lid switch further down. making the water drain. after a while I just replaced the lid switch.

Apr 22, 2009 | Washing Machines

1 Answer

Kenmore 80 series washer wont spin


Sounds to me like you may have a lid switch bad. If you close the lid and don't hear that click then you can be sure that you have a bad lid switch. If it is bad your machine is thinking that your lid is up and so it won't do any washing or spinning. Replace the lid switch.

Apr 11, 2009 | Washing Machines

1 Answer

WASHER WILL NOT SPIN


no belt ..motor coupling..its between gearcase and motor..if you need help changing post question..but a no spin only ..i would look at mt lid switch first

Dec 27, 2008 | Kenmore 3.2 cu. ft. Plus Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...