- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello, the error F5 02 means that the copy lamp lighting is abnormal. This is what is in the service manual:
F5 02 Content Copy lamp lighting abnormality Details The copy lamp does not light up. Cause Copy lamp error Copy lamp harness abnormality CCD PWB harness abnormality Check and remedy Check the copy lamp (SIM 5-3) When the lamp lights: Check the harnesses and connectors between the CCD unit and the MCU PWB. When the lamp does not light: Check the harness and connector between the copy lamp and the MCU PWB. Replace the copy lamp unit. Replace the MCU PWB. Remarks Copy lamp disconnection Cable is not attached. You must call a tech to solv your problem.
You scan save the picture as a JPEG or the text document,PDF is prefered, to a temporary place, say desktop . then "attach" it to your eamil. You click ATTACH and then browse to the place the file is, and "Attach it" then ya send it.
You can also cut/copy paste INTO the body of ya email. That works too.
You need to install the full feature software installed on the PC, you would have an option to configure Outlook from the Solution center, after you configure the Outlook on the PC and install the full feature software, you would get an option scan to email, using that option you can directly scan and attach it ti email directly....any clarifications please reply....
Here is a link to the users guide to your printer. After it opens go down to the basic scanning section. It will show you how to scan to a file. If it is a document be sure to select the .pdf file type. Also make a note of where it is going to save the file on your computer (most of the time it's My Document > My Scans) So now that you have scanned the file to your computer, open up your email and start a new email. Find where it says "attachement" and click on it. A box will pop open asking you to browse for your file. Just go to where you saved the file and click on the file and hit OK. Your document will be attached to the email.
Take a Normal,reduction and an enlarged copy(at any ratio) of a Newspaper in different size papers. Then check whether the blurred position is at the same position or not.If it is at the same position, check scanner for its free movement, there may be an obstacle which will not allow the scanner to move freely resulting in blurred copy. or else let me know.