Question about Shower Hardware

1 Answer

Only HOT water coming out of Redring Expressions 520 Power Shower

,Hi, Can anyone please advise me how to cure the problem of only HOT water coming out of our Redring Expressions 520 Power Shower after it was fitted by cowboy plumbers. Would it help me if i could download a User Manual for Redring Expressions 520 Power Shower from somewhere on the internet. Many thanks

Philip Knowles

Posted by on

  • philipknowle Dec 29, 2008

    Hi Phil_m7,
    Many thanks for your excellent response to my problem. Will get wired into the manual when I get home tonight. Thanks again.
    Regards
    Philip


  • Anonymous Mar 16, 2014

    Cold water only coming from redring Selectronic

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 68 Answers

Hello philipknowle,

Regretfully we have cowboy plumbers on this side of the pond!! I Sent you a few links that should help. The last one is the installation manaul (12pages) The Middle one looks like a 60 page catalog. And the top one is the company website.

Please rate this response and best of wishes, Phil

www.redring.co.uk


http://www.protimbathrooms.ie/downloads/pdf/RedringBrochure.pdf Pages 21-23 looks like there is a 3 year guarantee on these units.

But this looks like the manual for this item
http://www.applied-energy.com/clientfiles/File/manuals/redring/Powerstream%20Instructions.pdf

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Selectronic redring shower powering up , no water coming out and then turns off after approx 10 seconds


There are some troubleshooting actions mentioned on page 6 and 7 of the manual at this site

http://www.aroundtownflats.com/manuals/Shower%20Manuals/Redring/New%20Selectronic%20Instructions.pdf

The shower is designed to turn off within 30 secs if there is no water flowing through. The issue is why does water flow stop.
It can happen if shower is in overheat shutdown. Need to find if temperature setting is too high. There is a purge sequence to overcome this. See manual.

Apr 21, 2014 | Shower Hardware

1 Answer

How to get lock off temp control off my shower redring selectronic extra


my redring keeps reverting to number one whatever i do help me please

Feb 04, 2013 | Shower Hardware

1 Answer

Only cold water coming out of Redring digitemp shower


The temperature sensor in the unit is not functioning. It needs to be replaced!

Jan 14, 2013 | Shower Hardware

1 Answer

No hot water comes out of shower just cold comes out even when turned to hot, sink 2 feet away has hot water


The problem more tha likely lies within the shower valve body. Possibly the shower head has an accumulation of deposits clogging up the holes but that would not affect the hot water supply only. You might try removing the shower head and turning on the hot water. If you get hot, immerse the head in Limeaway for a hour or two and replace it, or install a new head. If you still do not get hot water, the shower valve needs attention. The cartridge inside the valve body will likely need replacing or at the least cleaning (Limeaway), replacing rubber seals and use plenty of silicone grease before re-assembly.

Oct 26, 2010 | Ldr Industries 520 1300C ADJUSTABLE SHOWER...

2 Answers

I have redring expression 500, the power is on but no water coming through, no noise from the shower. could this be the solenoid valve


Replace the shower unit.There never worth repairing after five years use.You could end up paying £80 for a plumber and £60 for a part and something else goes in 6 months

Aug 06, 2010 | Shower Hardware

1 Answer

Redring 3205 wont turn to cold - when control


Take a look at the .pdf document on their site. There will be adjustments within the unit that will assist you in adjusting the tempature. They advise that there could be seasonal adjustments that would need to be completed. I've assumed your model is the Activa 320S as I could not find a redring 3205. Good Luck.

http://www.applied-energy.com/clientfiles/File/manuals/redring/Active%20320S%20Instruction%20Booklet.pdf

Jun 29, 2010 | Shower Hardware

2 Answers

No cold water


Anti Scald Valves have an adjustment under the handle (remove handle) to allow so much hot water in no matter how far handle is turned. Its possible that the adjustment is set to allow only hot water in, this of course defeats the purpose of anti-scalding. Check to see if you can adjust this back. Good Luck have a Great Day. Please give a 4 THUMBS UP if this free answer was of any help.

Apr 01, 2010 | Ldr Industries 520 1300C ADJUSTABLE SHOWER...

2 Answers

Water not hot enough coming from my power shower


The Redring Superflow 3000 was not produced after 2001. You can try calling the showerdoc 0131-538-4343 or going to showerdoc.co.uk

Apr 12, 2009 | Shower Hardware

2 Answers

Cold water suply filling up header tank in loft thru hot water suply on shower.


hi did you run a seperate cold water supply from the storage tank to the shower pump & also a seperate hot supply from the hot water cylinder, it sounds as though the cold water is crossing into the hot service & pushing its way up to the tank as its the only way it can go, sounds as though the cold water connection to the shower is not tank fed & possibly directly off the water main.?

Oct 05, 2008 | Shower Hardware

Not finding what you are looking for?
Shower Hardware Logo

Related Topics:

571 people viewed this question

Ask a Question

Usually answered in minutes!

Top Shower Hardware Experts

john h

Level 3 Expert

7167 Answers

Mike

Level 3 Expert

4331 Answers

cracklin joe

Level 2 Expert

105 Answers

Are you a Shower Hardware Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...