Question about Yamaha HTR-6030 Receiver

1 Answer

Yamaha HTR-6030 When I am on Blu-ray and set to pro-logic only the L and R are displayed but all 5 speakers are working. Do you know why? Thanks so much! Steve

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,546 Answers

The indicator is telling you you have a 2-channel input. You may have the Blu-Ray connected wrong. Or the source is only Stereo. I need more details to assess that.

The sound coming from all speakers is normal if you have any surround mode selected, regardless of the characteristics of the source

I imagine if you experiment you might find all speakers playing for any number of 2-channel sources, not just Blu-Ray. Besides actual Pro Logic decoding, the various surround modes can provide some interesting effects on non Dolby Surround material.

I recommend that you try them all on various recordings and you may find one or another of them preferable over vanilla stereo. I find that any given artist or music type, even within a given CD, may sound 'better' with different surround settings.

Posted on Apr 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

S-protection


This means that there is a short detected on one of the amp outputs. Try disconnecting the speakers from the back of the unit and power on. If fault still persists then likely you have a bad output ic or FET (transistor). If fault goes away after removing speakers then plug them in one by one to see which is the culprit.

Jan 12, 2017 | Audio Players & Recorders

1 Answer

I have a monsoon mh505 pc speaker system. i lost the power adapter.i need a manfacture phone number or the model number of power adapter.


We can provide one.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Mar 14, 2016 | Audio Players & Recorders

2 Answers

I have a Rowe R80 jukebox and after moving it it has no sound through the speakers I am in New Zealand


Well, in addition to all the fine suggestions that are here, I would like to add the simple and easy things that may have happened during the move.

IF YOU ARE NOT GETTING A LOUD POP WHEN THE MACHINE IS POWERED ON.......

1) Make sure that the wires on the terminals below are still connected to the screws. There is one ground and one each for left and right. The lower the tap the lower the (max) volume of the jukebox.If they are not connected there will be no sound.
84c9065c-b7c6-4417-be21-0be7a6e74b41.jpg


There is a jumpers on the terminal strip where the volume control connects. Make sure that these connections are correct and tight. Also make sure that the jumpers did not fall off.
c1d72051-525d-47ec-8725-a6a8e655b20c.jpg
7a25e260-d39b-4992-8bce-8c2d2c9b07e5.jpg

If you are getting the loud pop in the speakers when the power is turned on .....

Check the plug on the side of the mechanism, just below the back of the tone are.(looks like a little tube socket) Check to see that it is connected to the mech and the CORRECT PLACE on the amplifier. It mat be possible to have this end in the wrong place. bf77613e-82a3-4e37-b8fe-cc80f4d4dbcb.jpg

Check all all your connections against the pic.

I hope this was helpful.

Mar 24, 2014 | Audio Players & Recorders

1 Answer

HMDX Jam wireless speaker cannot be paired with my computer


Go to your Bluetooth settings, go to the "Audio/Video" tab, under the "Content Protection" section uncheck the "Connect to content protection enabled headset only" and your bluetooth speaker(s) should now work.

hmdx-jam-wireless-speaker-cannot-paired-545ferrkqkuowltb2dothasu-3-0.jpg

Feb 02, 2013 | Audio Players & Recorders

2 Answers

Connect an active soundbar to a receiver


What if the soundbar is Bluetooth? Will I still be able to use that function and connect the active soundbar to the tv (Bluetooth) and connect the av receiver for other surround sound speakers? (they are pre-wired in the walls in the apartment I moved into)

Jan 08, 2013 | Audio Players & Recorders

3 Answers

Pioneer Model: DEH-P8400BH


Press and hold the source button until the CD Receiver turns off. Press and hold the center of the volume knob top bring up the settings menu rotate the volume knob until Clear memory is displayed and then press the center of the volume knob Clear memory YES will be displayed, press the center of the volume knob to confirm. The display will change from Clearing to Cleared

Aug 07, 2012 | Pioneer Deh-p8400bh Cd/mp3/ Receiver W/...

2 Answers

Motorola S9 bluetooth headphones


Try 0000 this is standard manufacturing default code for nearly any blue-tooth device that has security feature enabled and because the moto s9 as far as i can see has no way of being able to change this code it must be still at the manufactured setting

Aug 06, 2008 | Audio Players & Recorders

3 Answers

Front two speakers not working at all


Hit the the speakers A/B/Off button on the receiver. If you plugged the front channels speaker wire next to the center channel on the back of the receiver make sure its showing B. If you plugged them in the banana plug part, make sure its showing A.

Apr 12, 2007 | Audio Players & Recorders

14 Answers

Sound problem with JBL Creature II


I had a problem with the speakers not working properly. The green lights lit, but the amount of sound coming from the speakers compared to that of the sub was much lower.
I decided to take it the speakers apart.
I found that the magnets on the speakers had moved forward slightly in the plastic cage they sat in. I pushed them back as far as they would go, and Hey Presto! working again!
I hope this helps someone!

Feb 23, 2007 | JBL CREATURE II Computer Speakers

Not finding what you are looking for?
Yamaha HTR-6030 Receiver Logo

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

69955 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...