Question about Asrock K7S41GX Motherboard

1 Answer

Bootup,hardwere,,or some problem....

My computer have Asrock K7S41GX,amd athlon 1.16GH,nvidia geforce fx5200 128 agp 1,5v video card,and 2 hard disk and one dvd-rw

i keep getting problems with "him",its keep getting close up,like a shut down but in a sudden way,i went with my pc to clean it up and maybe repair(i've believed that my power sourse is the issue),and they also said that power sourse isnt the issue,i have my hard-disk set,one to primary maste on ide-1 cablem,my dvd-rw slave on ide2 cable,and also ion ide2 my wsecond hard-disk set to sec master(this is the way that make it stable)

for any answers,or extra informatn....post here....:)help pls:)

Posted by on

  • Anonymous Dec 28, 2008

    It's already cleaned, once i've cleaned it a little bit after that i've changed my mind and went to a proffesional repair "store"...

    a little help i've gotlately this errors

    PAGE_FAULT_IN_NONPAGED_AREA
    MEMORY_MANGMENT
    C000021a

    ive looked over the internet and dont fond anything helpfull yet, and with these holidays around i can get it to someone who can repair it....i also know a bunch of thing about computers but this problem blowed my knowlege in pieces:)

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 101 Answers

Sudden shut downs are often heat related. Modern motherboards have a sensor under the CPU that cuts off the power when the temperature gets above a certain point (sometimes this point can be set in the BIOS). Usually the CPU fan will spin up very fast trying to cool off the processor just before it shuts down. Often you can feel the heatsink being very hot as well.

I suggest you check your vent holes for clogging (hair, dust, etc.) to make sure you are getting good airflow. Next, peek into the CPU fan to see if there is dust accumulated underneath blocking the heatsink from expelling heat (the dust layer acts like a blanket and keeps the heat in). Finally, if you are technically inclined you can try removing the heatsink/CPU fan and reapply thermal paste to the processor.

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cpu


AsRock Support > AlivenF6G-DVI Motherboard > Main Support page,

http://www.asrock.com/MB/overview.asp?Model=ALiveNF6G-DVI

In the list on the left hand side, click on CPU Support List

http://www.asrock.com/mb/overview.asp?cat=CPU&Model=ALiveNF6G-DVI

The AMD Athlon 64 X2 5800+ CPU, (Processor), is part number ADA5800IAA5DO.
Operates Up To a maximum frequency rate ('Speed'), of 3.0GigaHertz, has two L2 cache's of 512MegaByte, and uses the Socket AM2 CPU socket.

http://en.wikipedia.org/wiki/List_of_AMD_Athlon_64_microprocessors#.22Brisbane.22_.28energy-efficient_65W.2C_G1_.26_G2.2C_65_nm.29

In the CPU Support :List it is not shown.
This is ONLY because the Athlon 64 X2 5800+, came out way after the CPU Support List was compiled. NOT because it isn't supported.

No, I have to amend that,

http://forums.amd.com/forum/messageview.cfm?catid=14&threadid=108319

It's because AMD's lack of information, apparently, that AsRock didn't list it.

I don't see the voltage range listed anywhere. (To include AMD)

http://www.cpu-world.com/CPUs/K8/AMD-Athlon%20X2%205800+%20-%20ADA5800IAA5DO.html

http://www.newegg.com/Product/Product.aspx?Item=N82E16819103274

At any rate let's go with deductive reasoning, and see if this CPU is supported.

1) You can compare the Athlon 64 X2 5800+, to the other CPU's in the CPU Support List; that are comparable to it, and above it.

Don't even have to go too far.
Look at the ADA6000IAA6CZ, and the ADX6000IAA6CZ CPU's.

The two Athlon 64 X2 6000+ versions.
(Doesn't state that, just the above part numbers)

However I DO notice that the ADX requires BIOS version P2.00, and the ADA only requires BIOS version P1.60
(Since BIOS)

2) The motherboard chipset is an Nvidia GeForce 6100 and Nvidia nForce 430, Or Nvidia GeForce 6150SE and Nvidia nForce 430

http://en.wikipedia.org/wiki/GeForce_6_Series#GeForce_6100

http://en.wikipedia.org/wiki/Comparison_of_Nvidia_chipsets#For_AMD_processors

Compatible? Yes.
May need the P2.00 BIOS update, if not already installed.

Regards,
joecoolvette

May 16, 2013 | Asrock Motherboards

1 Answer

What graphics cards can i use with it


Hello here is the homepage:

http://www.asrock.com/mb/overview.asp?cat=Download&Model=ALiveNF4G-DVI

The mainboard has 1 x PCI Express x16 slot, for the graphic card.

Almost all new graphic cards, has this socket type.
The old type is AGP, but it does not fit this mainboard.

I recommed to use ATI/AMD HD series.

A big graphic card also needs, a bigger power supply.
At least 500 watts.

Good luck

Feb 05, 2013 | Nvidia Asrock Alivenf4g-dvi Socket Am2...

1 Answer

I am putting together an ASRock mobo. I am told NOT to use a 3.3v AGP card. as it will damage the board. ASRock K7S41 / K7S41GX. N Videa replys are not specific. I have 3 AGP video cards and have no idea...


Hi, you can download a manual here:
Your mainboard has AGP slot.
  • 1 slot for AGP 8X/4X 1.5V

  • http://www.asrock.com/mb/overview.asp?Model=K7S41GX

    http://www.nvidia.com/page/geforce2mx.html

    The to first one is AGP.
    The last one is PCI-E

    Graphics Processor: NVIDIA GeForce2 MX 200

    NVIDIA Model Number: 8859

    Memory: 64MB

    Outputs: DVI

    Interface / Slot Type: AGP




    • Installed Memory: 32
    • Interface Type: Video - 15 pin High-Density D-shell (VGA)
    • Video Chipset: NVIDIA GeForce2 MX400
    • Slot Type: AGP

    GeForce MX4000 Bus Type PCI Slot Memory on Board 64 MB DDR RAMDAC Support 270 MHz Max. Resolution 2048x1536 8/16/32 bit colors with 60Hz (Analog) Memory Interface 64-bit Display Output Dual VGA
    (1x On-Board VGA,
    1x MD9-pin port supports 1 x VGA) Operating System Support Windows® XP/2K/98//Me/NT 4.0

    Aug 28, 2011 | Asrock K7S41GX Motherboard

    1 Answer

    What are compatible video cards for k7s41gx?


    This board is only compatible with AGP 8X video cards.
    For full specs on this motherboard go to: http://www.asrock.com/mb/overview.asp?Model=K7S41GX

    Your options are:
    Some Geforce 6 series cards (mainly the 6200 and 6600GT).
    All of the Geforce FX series cards (FX5700 and FX5200).
    All the Geforce 4 series cards (Geforce 4 Ti and Geforce 4 MX).
    All the Geforce 3 series cards (Geforce 3 Ti 500, Geforce 3 and Geforce 3 Ti 200).
    All the Geforce 2 series cards.
    All the Geforce 256 series cards.

    This should answer your question.
    Please rate me high.
    Thanks.

    Nov 01, 2010 | Asrock K7S41GX Motherboard

    1 Answer

    I HAVE A ASROCK K7S41GX MOTHERBOARD AND JUST BOUGHT A NEW GRAPHICS CARD WHICH DOESNT FIT!! THERE IS ALSO A WARNING STICKER SAYING NOT TP USE A PERTICULAR VOLTAGE OF CARD.COULD ANYONE PLEASE TELL ME THE...


    upon checking your motherboard, it has an AGP port for video. so you have to get an AGP video card compatible. New video cards are PCIX capable which will not fit AGP ports..

    So you can get any AGP Video card and that should work.

    ~jash

    Sep 23, 2010 | Asrock K7S41GX Motherboard

    3 Answers

    I would like advice on upgrading my Graphics card


    Unfortunatly your still running low end CPU power and low end agp graphics. Your going to pay 150-200 just for a fair PCIe/AGP HD/3D VC. If $200 doesnt hurt (and this is the lowest price best option), then might I suggest Mobo/CPU/RAM for around $200 that would do the trick and allow for future upgrades. You might also need a power supply. I just built one less than 3 weeks ago for a friend and it fairs against my own gaming comp.
    MY PC...
    AMD ATHLON 64 X2 DCP 6000+ 3.01GHz
    NFORCE6M-A V:2.0
    8GB PATRIOT
    XFX 8800GT AD 512MB
    500W PS

    NEW PC....
    Gigabyte GA-MA785GMT-UD2 MB $90+/-
    AMD Athlon™ II X2 250 BOX 3.0GHz (CAME W/FAN)$70+/-
    AND 4GB OF DDR3 1066 RAM COMPATIBLE WITH MOBO $40+/-
    THE ONBOARD VIDEO IS CAPABLE OF USING 700MB
    OF RAM...RGB/DVI OUT.
    ae6750c.jpg 52d5434.jpg
    HOPE THIS HELPS.






    Sep 12, 2009 | Asrock K7VT2 Motherboard

    1 Answer

    Problem with k7s41GX


    try to check your RAM.. maybe your ram is LOSE connection or physically damaged.

    Feb 04, 2009 | Asrock K7S41GX Motherboard

    4 Answers

    Increase graphics card memory


    go to your bios setting > chipset feature > onchip AGP.
    you can increase your Graphic card from ther if it is on bourd.

    Jan 28, 2009 | Asrock P4I45GV R5 Motherboard

    1 Answer

    My computer have Asrock K7S41GX,amd athlon 1.16GH,nvidia geforce fx5200 128 agp 1,5v video card,and 2 hard disk and one dvd-rw i keep getting problems with "him",its keep getting close up,like a shut down...


    Hi,
    You may want to set all your drives (hard drives and DVD-R) to cable select setting. Sometimes this helps because it will enable Windows to designate drive sequence for you. Just a thought.

    Dec 28, 2008 | Asrock K7S41GX Motherboard

    2 Answers

    Asrock k7s41gx


    it seems to me its a dust problem. any beeps?

    Sep 13, 2007 | Asrock Motherboard K7S41GX for AMD...

    Not finding what you are looking for?
    Asrock K7S41GX Motherboard Logo

    170 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Asrock Motherboards Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    joecoolvette
    joecoolvette

    Level 3 Expert

    5660 Answers

    Mark Taylor
    Mark Taylor

    Level 3 Expert

    728 Answers

    Are you an Asrock Motherboard Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...