Question about Dane-Elec DaneElec 2GB USB Drive Red Hard Drive

1 Answer

I just got one and when i put it in my computer it wants to install something, and i dont want it to, and it show up anywhere on my computer.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

Are there any files on the hard drive that are your and you want to keep. the one thing you can try is formatting the hard drive but doing that completely wipes everything on the hd.

ALSO if you do this and alter the software on the hd, make sure that it does not effect your warrenty

to format, go to my computer --> right click on the hd you want to format --> click on format and then change the necessary options and then click format.
this should get rid of the files that are on the hd

REMEMBER THAT FORMATTING COMPLETELY ERASES EVERYTHING ON THE HDD AND IT MAY BE VERY HARD OR IMPOSSIBLE TO RECOVER

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed a new hard drive in my PC. It installed itself after I turned on the computer but it doesn't seem to show up on My Computer as a individual drive. BIOS and the Sys Info recognizes there is a...


Are you sure your BIOS is not showing the old hard-drive you had before you installed the new one?

On the new hard-drive you bought, do the following step

there should be a jumper that came with it, put the jumper to "master",
if that didn't work, put it to "slave", if that didn't show up, put it to "cable select" and try it.
If all failed, totally remove the jumper and try.
Also check in the BIOS to make sure that the Drive is not disabled.
This seems to be a problem from the jumper.

Please rate 4 stars if this helped you.

Apr 26, 2011 | Seagate HDD 1TB 7200RPM SATA600 32MB 3YR...

1 Answer

Hi my iomega select 34579 desktop 1tb harddrive won't even show up anywhere on my computer, now its windows 7 i'm running off of so i dunno if that has something to do with it, but i just bought this. the...


It has to do with the motherboard. If it isn't a USB 2.0 port it will not recognize the drive you will have to change the motherboard or the cheaper thing to do is put a PCI to USB card in the computer.I had the same problem with a buddy's computer.

Feb 12, 2011 | Iomega 34579 1 TB USB 20 Hard Drive

1 Answer

How dues it work just plug it in thats all, all how do you put programs on it and then play them back later,


Hi there,

This device is equipped with something called UPNP which stands for Universal Plug N' Play which means that you just need to plug this device in and it will work. Although for some operations to work properly you may have to install a driver which usually comes wit the device on a CD Rom.

Once this device is installed, it should show on your computer when you go to "My Computer". It should be displayed as a portable drive and will probably be called something like "Removable Disk (D:)".

Now when you want to access the device you just double click on it in "My Computer" and you will e able to see all the information on the device. When you want to put games on the device, when installing you must save it on the device and it will be installed on there.

Thank you for using FixYa! Have a nice day and please remember to rate this solution.

Warm regards,
BearWeb

Jan 09, 2010 | Seagate FreeAgent Go 250 GB USB 2.0 Hard...

1 Answer

My computer does not show glyph drive aftwer its connected


I had not created even a primary partition for my Glyph drive which I needed to do. So I created a new partition and seleected the maximum size for it which was all 500GB of the drive, since I dont want any real divisions of the drive; then I selected quick format. This is actually on the Glyphtech.com questions on how to format the drive, it will telll you about this step of creating a primary partition (or even more partitions if you want them).

Feb 19, 2009 | Glyph GT 050Q (GT050Q1F250) 250 GB Hard...

1 Answer

No cd included with hard drive, how do i install?


normally you dont need any software to install the HD if its a newer computer (last couple of years) just check your jumper settings, it should show you on the HD where to put the jumper for master / slave.

If your putting it in as a second HD for more space you will want to put the jumper on the back of the drive to "slave" and attach it to the same cable as the hard drive in your computer already.

Jan 02, 2009 | Maxtor Hard Drive

1 Answer

Computer won't recognize External hard drive


tru to see the driver , and make sure it's properly installed , by following this path
Right click on My computer >>Properties>> hardware tap>>device manager
then expand Universal Serial Bus Controller , if there's a yellow sign on ur device name , then right click and chose , install driver

Jul 12, 2008 | Acomdata Computers & Internet

1 Answer

Installation not happening


if you put it show Or auto run it ?
if test Any pendriver put ..what can show ..if it show &run it you try any other pc..other way you try add new hardware install...hope it ok.......

Jun 14, 2008 | Western Digital Caviar (wd800lb) 80 GB...

2 Answers

Media hard drive


well i have a problem with my i/o magic dvd burner portable i already install on the computer but i dosent let burn a dvd cant you please help me thanx

Jun 13, 2008 | Computers & Internet

1 Answer

SanDisk is not working


You are calling this a flash pen, it looks a flash card. You use this by putting it in a usb port on your computer? On which computer has it been working before? and when you open your( my computer there is nothing showing up in the usb port you have pluged it in to?) I am trying to help, but you really have not given enough info,, add some more information and maybe you can get some more help

Jun 05, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

How do you set up multiple WD Anywhere users on the network to share the same MyBook World Edition


hey,

-No WD Anywhere allows 5 users I think.
This could only be the solution, if you installed WD Anywhere on other PCs before

Check out the MioNet site, think they give options for new users.
if this is not the problem, I don't have a solution by now.

bye

Feb 08, 2008 | Western Digital 500GB My Book World...

Not finding what you are looking for?
Dane-Elec DaneElec 2GB USB Drive Red Hard Drive Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dane-Elec Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

laikexpert
laikexpert

Level 3 Expert

281 Answers

woodzowl307

Level 3 Expert

619 Answers

Are you a Dane-Elec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...