Question about Brother MFC 240C All-In-One InkJet Printer

2 Answers

I have windows vista and mybrother MFC-240C won't print, Says can't find printer?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 69 Answers

First unplug ur usb cable from ur mfc-240c than deinstall all drivers of your printer

than reboot your system

than go here:

http://welcome.solutions.brother.com/bsc/public/midlink3.aspx?prod=mfc240c_all&lang=all&src=DOWNLOAD

click on your country flag and download the latest drivers for ur mfc-240c

install it

than when asked for ut plug in your usb cable from ur mfc-240c

the computer wil find your mfc-240c now whend asked for reboot than reboot

Posted on Dec 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 837 Answers

Are you using the vista driver as found here

Posted on Dec 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just changed my ink cartridges but now the printer is only printing black and white


STEP 1: OPEN THE PRINTER PROPERTIES:
WINDOWS 98/ME/2000
A. Click on START -> SETTINGS -> PRINTERS
B. Right click on your Brother machine (example MFC-XXXX where X = modelnumber of your machine) and left click on PROPERTIES
WINDOWS XP
A. Click on START -> CONTROL PANEL -> PRINTERS AND FAXES (or PRINTERS AND OTHER HARDWARE, then PRINTERS AND FAXES)
B. Right click on Brother machine (example MFC-XXXX where X = model number of your machine) and left click on PROPERTIES.
WINDOWS VISTA
A. Click on START -> CONTROL PANEL -> PRINTERS
B. Right click on Brother machine (example MFC-XXXX where X = model number of your machine) and left click on PROPERTIES.
STEP 2: CONFIGURE THE PRINTING PREFERENCES
Depending on which version of the driver you are using, you will need tocomplete one of the following sets of steps.
A. If using the Brother Original Driver:
i. On the GENERAL TAB click the button for PRINTING PREFERENCES.
ii. Click the ADVANCED TAB.
iii.. Choose COLOR
iv. Click APPLY -> OK
v. Click OK to close the Printer Properties window. Your printer will now print in grayscale.
B. If using the Vista built in Driver:
i. On the GENERAL TAB click the button for PRINTING PREFERENCES.
ii. Click the PAPER/QUALITY TAB.
iii. Choose COLOR
iv. Click APPLY -> OK
v. Click OK to close the Printer Properties window. Your printer will now print in grayscale.

Oct 31, 2010 | Brother MFC 240C All-In-One InkJet Printer

1 Answer

How can I set my MFC-240C printer to print from my computer


switch on the printer
1. install driver for mfc-240c
2. go to control panel in your computer
step to control panel
select START then control panel
3. select printer mfc-240c right click on it and then click on click on <Set as Default Printer>
4. right click again on it the select <properties> then select "print test page"
test page will printout on printer
5. now you can use mfc-240c as printer

Aug 19, 2010 | Brother MFC 240C All-In-One InkJet Printer

1 Answer

My brothers mfc 240c printer wont print because one ink is not full but it has black


You need to have ink in all cartridges to print. You can put a small electrical tape over the little window on the cartridge to print with empty inks, but you risk an air bubble in the ink tubes. If you don't care about printing color at some time, just cover the window on empty carts.

Apr 20, 2010 | Brother Multi-Function Center MFC-240C...

1 Answer

My brother MFC 240C was set for printing only black and white, since I had only installed a black cartridge. Now I have installed the three color cartrdiges also. How do I change the settings to print...


You have to change the settings in your print driver. In Windows XP or Vista, go into the Control Panel and the Printers & Faxes applet. Right click on the Brother print driver and select Properties. In one of the tabs there should be an option for either Grayscale or Color printing (probably under Color Management) -- change this to Color and then click OK or Apply to save the changes.

By changing it in the print driver settings, the change should take effect for all programs that you print from.

Jan 02, 2010 | Brother Multi-Function Center MFC-240C...

2 Answers

MFC-240C printer head repair


mY MFC-240C PRINTER IS NOT PRINTING WITH A MESSAGE " UNABLE TO PRINT SEE TROUBLESHOOTING

Nov 11, 2009 | Brother MFC 240C All-In-One InkJet Printer

1 Answer

Brother mfc-240c and windows vista


Yes you can. Download the drivers from the brother website. brother.co.uk

Aug 21, 2009 | Brother Multi-Function Center MFC-240C...

Not finding what you are looking for?
Brother MFC 240C All-In-One InkJet Printer Logo

Related Topics:

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Printers & Copiers Experts

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

John mullen

Level 2 Expert

245 Answers

Are you a Brother Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...