Question about Beko 324250WN 28" TV

2 Answers

Sky codes for beko 32' tv

I need codes for my beko hd 32'' tv as the controw for the tv dont work

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 325 Answers

On the sky remote press the following

TV
RED + SELECT (blinks twice)
TV
0125

press the volume button,if it works press SELECT if not press TV then VOLUME again repeat this process of TV then VOLUME until it works then press the SELECT button to save the code to your remote.

Enjoy

Littlle Dish Fitter

Posted on Sep 02, 2009

  • Mick Sep 17, 2009

    please follow the steps below:



    TV

    RED + SELECT (flashes twice)

    TV

    0125



    try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.



    cheers



    Little Dish Fitter

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 139 Answers

BEKO
17WLB450S
SKY Rev 6
0081
Peter

C727WNS
SKY Rev 6
0742
Scott Meek

28421NDS
SKY+ Rev 8
0742
Denis Martindale

ND28426NDS
SKY Rev 4 or earlier
742
mike

NR 14272R
SKY Rev 6
398
Dr Vinod Gangwani

NR 142746 TS
SKY Rev 4 or earlier
720
david

NR15LB450S
SKY+ Rev 8
0065
Tim Hamblin

NR 17WLB450S
SKY Rev 4 or earlier
0065
CM

NR17LE300S
SKY Rev 4 or earlier
742
Peter Lyon

NR20212T
SKY Rev 6
0743
Tammie Bowkett
Try these its all i have for BEKO Beko
0125
514,398
JonnieC

Posted on Mar 14, 2009

2 Suggested Answers

freetek
  • 5568 Answers

SOURCE: how do you use a beko 32" hd tv as a pc monitor?

Thanks for the detail-
VGA connections are pretty uncomplicated so the only thing that might need setting is the PC's video settings which may be set for higher than the 768 line standard.
The TV may not be sending information to the computer for Plug and Play use but you could try this anyhow:
- Have the TV turned on. the PC off. - If not still connected, connect them. - Turn on your PC. 
If the TV set is conforming, it should send a signal packet to the PC with information about itself. You will see early if it had; a Windows dialog box should tell you 'Found new device (or hardware), installing software' 
If that or similar did not appear, then after the PC is booted, Open the Control Panel, then the Display folder, then click on the Settings tab. You will see a linear control for the resolution that will step from one standard to the other, up or down from the current setting. Unfortunately, it won't change anything until you click on OK or Apply but it pauses after clicking shows the result then asks if you want to keep that setting.

Posted on Dec 26, 2008

  • 8457 Answers

SOURCE: 32" beko TV stuck in standby

Ur power board is dead.U need a new one.

Posted on Sep 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO GET HDTV FOR SAMSUNG WS32Z308P


You will need an HD receiver (Freeview HD, Freesat HD or Sky). For Freeview HD you'll need to check whether it's being broadcast in your area yet. Check the freeview site

May 01, 2010 | Samsung WS32Z308P 32" TV

1 Answer

Nead tv code for BEKO modelnr:14272R


742 on a sky remote worked for me.

Apr 29, 2010 | Beko 142746 TV

2 Answers

How do i get the tv on av without using the remote?


push channel down button through the channels, then it will go into av mode(video) by just keeping to press channel down. it will be channel below channel 02. just keep pushing channel down button

Nov 21, 2009 | Beko 324250WN 28" TV

1 Answer

Cannot get my sky guide to respond on my Loewe Articos 32,i think the kids have scrambled the tv remote! Any ideas?


There are several things that can stop your Sky remote from working.

step one:
get a mobile that has a camera on it. point the remote at the camera and press the TV guide button on the remote you should see a little light by looking through your camera. This is because cameras dont like infrared

if you see the light whilest looking from the camera phone then the remote is working.

Step 2:
There can interfearance from devices like WII's or if your television has a back light you can turn this down and see if this is going to make any difference to the sky box.

If it does you know what is casuing the problem.

Step 3:
There may be another solution to your problem. Go onto Ebay and type in there Magic eye. you can get them from Argos but you will be paying 3 times if not more then you can get them off ebay.

once you've got the magic eye. plug this into the back of your sky box into RF OUT 2 this must be in 2 due to it providing 9v to the eye.
on your sky remote press services, 4, 0 1 select. go to Rf setting and turn this option to ON and then go down to save. you should see a little red light on the magic eye come on this is all done.

Now try your remote as normal.

I fit sky and a lot of the HD sky+ boxes have rubbish IR (infrared) so this sorts out a lot of problems.

Hope this helps

Little Dish Fitter

Sep 01, 2009 | Loewe ARC332 32" TV

1 Answer

32" beko TV stuck in standby


Ur power board is dead.U need a new one.

Jun 21, 2009 | Beko 324250WN 28" TV

2 Answers

TV Remote not working.


Philips
0081
584,065,040,041,582,221,115,071,351,402
Try these i acnt find one for your model but sometimes others for the same make might work

Let me know,plz
JonnieC

Jan 20, 2009 | Philips Magnavox 27MS343S 27" TV

1 Answer

Remote code required for UK Bush tv model WS6680SIL/C7


Found the correct code for my TV & Sky remote... I searched a fair bit more on google for... "WS6680SIL/C7 code" and found... http://www.sjstv.co.uk/skycodelistNEW.html which the correct code for my Bush TV - 0742. Others you may want to try are Bush 0157 246, 263, 377, 037, 064, 065, 310,300,383, 399, 391, 402, 339. or Beko 0125 514, 398. Further, Alba Group are the firm whom own Bush brand amongst others. Google Alba Group to get their site and links to Bush sites.

May 20, 2008 | Bush WS6671 28" TV

1 Answer

Sky code for remote


The code for you sky remote is 0125.

4 digit' method

1. Turn on your TV.

2. Press tv on your Sky remote control.

3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice.

4. Press tv on your Sky remote control again.

5. Key in the Brand Set code for your brand of TV then press select. The light on the Sky remote control blinks twice.
If the light blinks once only, re check the code for your TV and start again at step 1.

6. Press the on/off button (power-top right button on your Sky remote control).

If your TV switched off, press select . The light on the Sky remote control blinks twice.

If your TV did not switch off, press tv , then press the on/off button. Repeat this (press tv , then on/off) until your TV turns off, then press select.

If the light on your Sky remote control blinks three times, your Sky digibox has checked all the possible settings for the code you used. Check that you have the right 4 digit code and start again at step 1.

7. Press tv guide .
If you see the TV Guide screen, the remote control setup process is complete.

If you did not see the TV Guide,you must now set the TV Guide function as follows:

8. Press tv on your Sky remote control.

9. Hold down select and the green button together for about two seconds, until the red light on the Sky remote control blinks twice.

10. Key in the number of the channel on your TV that you use for watching satellite TV (For scart switching, this may be one of the other buttons on your remote e.g. help, i or a colour button).

11. Press select on your Sky remote control. The red light blinks twice. The remote control setup process is complete.

Feb 13, 2008 | Standard (CRT) Televisions

3 Answers

Sky+ remote codes


hi

i have here some writeups i found during surfing for your sky remote.

Not every TV is included in the code list. In fact, although it was claimed that "95 percent" of TVs could be controlled by the Digibox remote, the true figure is probably "95 percent of last year's models" and the standard remote will NOT control your Video Recorder or any other equipment.
UPDATE October 31, 2006. The latest versions of the remotes are SKY Rev.8 and SKY+ remote are Rev.6 and Sky-HD are Rev.8 (Sky-HD also operates the SKY+ Digibox and contains codes for more recent Plasma and TFT screens). Look at label inside the battery compartment. These remotes contain codes for more recent TV sets and omit codes for TV sets that are now several years old. We do not stock earlier revisions.


seems here that they may have no codes for your tv.
i will just update you if ever i find codes and ill post it here.

Jan 23, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

Tv is stuck on av channel


no-not the tv try buying another remote from the manufacturer and that will solve the problem

Jan 06, 2007 | Grundig GF70-600 TV

Not finding what you are looking for?
Beko 324250WN 28" TV Logo

Related Topics:

612 people viewed this question

Ask a Question

Usually answered in minutes!

Top Beko Standard (CRT) Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Are you a Beko Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...