An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: NEC plasma sync 42mp2 vm2g
If your referring ot an outside antenna or cable, your set does not have a tuner, it is a monitor style. You will have to get a converter box and use the video input ( yellow) (red/wht-audio) on the tv, or the component input ( green, blue, red ) on the tv, provided, the box has the output for it. Most cable boxes have these and the antenna dtv converter boxes do not as far as I know but look into it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The board is located on the extreme-right at the center of the chassis. In some sets I have seen the Y-sus on the left and the Z-sus on the right. If you can get me the part number off the board I can confirm if that is the board
Have you tried changing the input? Meaning, as soon as you power the screen on, press the "input select" button then wait a few seconds if nothing comes up press it again, do this until you find your connection and you should be set. This problem seems to keep coming up with this particular Plasma, so I guess I'll keep on answering. Good Luck
Usually many plasma's have their controls on the side of the screen including power, so I would check their 1st.
As for getting a remote, harmony (now owned by logitech) makes some great remotes. One of the advantage of their remotes is that they are programmed from the computer by entering the model # of the items you wish to control. So you would just enter the NEC model to program the tv.
According to the manual for "POWER/STANDBY indicator is blinking in red":
"The temperature inside the main unit has become too high and has activated the protector."
"Promptly switch off the power of the main unit ans wait until the internal temperature drops."
"If the monitor becomes too hot, the overheat protector will be activated and the monitor will be turned off. If this happens, turn off the power to the monitor and unplug the power cord. If the room where the monitor is installed is particularly hot, move the monitor to a cooler location and wait for the monitor to cool for 60 minutes."