- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The easiest way to transfer the images is to remove the memory card and put that into your computer (assuming you have the appropriate reader built in). Otherwise you should be able to copy the pictures by plugging the camera into your computer by USB.
Most models will be recognized like an external storage device and you should be able to transfer from that. Very rarely some cameras need to be set into a PC / transfer mode in the settings before transferring by USB.
Please leave feedback if this was helpful. Thanks!
The Nikon has software that allows you to transfer/copy photos to the computer.
There is an alternate method of transferring photos.
Get a USB memory card reader, remove the memory card from the camera and insert it into the USB card reader and then plug it into the computer's USB port. Thes computer will see the memory card as an external memory device, You can then copy the photos to your computer.
I don't know in which country you live (this is helpful to know!), but in most stores offering cameras and many offering electronic items, you should be able to procure a kit of adaptors that will include a cable to use with them.
In the US at least, Wal-Mart, Best buy, Circuit City and Radio Shack are likely sources.
Elsewhere (?) you are on your own.
Have you checked the HP hep site?
Here is their suggestion
This document explains how to transfer images from the camera to a computer running Windows XP operating system by using a universal serial bus (USB) cable.
Transferring the images
Follow the steps below to transfer images from the camera to a Windows XP computer.
Step one: Connect the camera to the computer
Turn off the camera.
The camera came with a special USB cable for connecting the camera to a computer. Connect the large end of that USB cable to the computer.
Figure 1: Connect the USB cable
Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.
Step two: Transfer the images
Choose one of the following methods to transfer the image files:
Method one: Transfer images with the HP Photosmart software
If images on the camera are selected for printing or selected for HP Instant Share destinations, make sure the computer is connected to a printer and the Internet.
Turn on the camera. The HP Import Photos software starts on your computer. If you have set the software to automatically transfer the images in the camera, the images automatically transfer to the computer.
Otherwise, in the Transfer images from Camera/Card screen, click Start Transfer . The images are transferred to the computer, and then if there are any still images that were previously selected for HP Instant Share destinations, those actions are started.
When the Image Action Summary screen appears on the computer, you can disconnect the camera from the computer.
Method two: Transfer images without the HP Photosmart software
If you do not, or cannot, install HP Photosmart Software on your computer, you can still transfer images from the camera to the computer using the Picture Transfer Protocol (PTP) in Windows XP.
Follow the steps below to transfer images.
Turn on the camera.
Windows will automatically launch a program to transfer the images.
When the images have finished transferring, disconnect the camera from the computer.
If you encounter problems, check that the camera USB Configuration in the Setup Menu is set to Digital Camera .
While in Live View , press the Live View/Playback button, and then press the Menu/OK button.
Scroll to the Setup Menu using the left/right arrow buttons.
Use the up/down arrow buttons to scroll through the Setup Menu to highlight the USB option.
Use the left/right arrow buttons to change the setting to Digital Camera and then press the Menu/OK button.
To exit from the Setup Menu , press the Live View/Playback button.