Question about Sony KV-36XBR400 36" TV

Open Question

Sony 40 XBR tube cable bleeds through to inputs

I have a 7 year old 40 inch trinitron tube tv (300+ pounder). It has developed a problem in the last year where the cable input bleeds through to any other input I have selected. It is the video only, not the audio. So when we try to watch a dvd or play a video game, the cable video comes through. If I unplug the coax cable, the snow bleeds through. Any help would be appreciated. Thank you.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 579 Answers

SOURCE: Sony Trinitron KV-20S20

My experiance is to not put money into a TV that is over ten years old. TVs stress out their electronic components worse than almost any other electronic product. After 10 years, there are so many parts that are ready to fail that your are probably wasting your money trying to get any more life out of it.
Another option is to wholesale replace the main board by sending it to Module Exchange at 972-298-1212, or PTS Electronics 800-844-7871 ptscorp.com.
Be careful on buying a new one though. Often times, these new technology ones are much worse. Always Google the model number of the set you intend to buy and add the word 'repair' or 'complaint' to see if it is one of the many models that are customer service nightmares being produced by even the most reputable companies today.
Hope ya fix it!

Posted on Feb 08, 2008

Ad
  • 1 Answer

SOURCE: Sony trinitron XBR Tv

i need a rc gide

Posted on Nov 07, 2008

jerryg50
  • 1689 Answers

SOURCE: Sony 36 Wega XBR Flat Screen - sudden death.

This could be a scan amplifier failure, and there is a loss of high voltage to the CRT. Part of the power supply may have also failed. In these sets, if the CRT emission goes low in emission, or the CRT goes defective, the bias supply to the CRT will go in to protect.

An experienced TV service tech can troubleshoot the set and give you an estimate for service. Considering the age of the set, the cost of service may not be worth it.


Jerry G.


Posted on Jan 08, 2009

Th3_uN1Qu3
  • 47 Answers

SOURCE: Trinitron XBR Try to turn on but light just

Look for the service manual, it contains the explanation of the flashing light codes, it will tell you what part is faulty.

Posted on Jun 26, 2009

  • 1 Answer

SOURCE: Sony Trinitron XBR's integrated HD tuner problem

Hello,
buy technical Sony docs on Ebays :
SONY TV SERVICE & REPAIR MANUALS ON DVD + 400 MODELS 12,99 USD

and good luck : Thierry

Posted on Sep 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the Sony XBR 40in Trinitron and it won't


sounds like you have some cold solder or bad joints,power section, inspect it ,with the back off, but be carefull.........i had one that did that...bad connection in solder joint...had to resolder,if you have to resolder,make sure it is unpluged.hope this helped....

Feb 23, 2010 | Sony FD Trinitron WEGA XBRKV-40XBR800 40"...

1 Answer

Sony trinitron xbr (9 years old) failing to power up


Turn it off u leave on to long ur CRT Tube will dies soner.Resolder the FBT,the flyback transformer, the big block of plastic with a red wire with a cap hook to the and the transistor beside it.This transformer is the HV to the CRT to get power.

Jan 15, 2010 | Sony FD Trinitron KD-34XBR960 34" TV

1 Answer

I just got a Sony Bravia 40 inch lcd 1080p high def tv. I am able to pick up a dvd picture on it, but I am having trouble finding my cable channels. I do have a cable box, and it is hooked in there...


When I installed my dads Samsung 40 lcd 120 hz. I had to turn it all off and after 5 mins I turned on the cable and then 5 minutes later I turned o the tv.

Or have you tried "searching" the tv for cable channel's?

Jun 17, 2009 | Sony BRAVIA XBR KDL-V26XBR1 26 in. LCD...

2 Answers

Sony Trinitron KV36XBR300


Best thing to do is get 3-4 people to haul it to the curb. That is a high voltage failure which can be related to a bad tube or flyback. That TV is too old to get parts for and not worth spending a single dime on.

Feb 02, 2018 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

Sony Trinitron XBR, Stand By Mode?


The 6 or 7 blinks usually indicate a problem in the horizontal circuit. Since the TV recovered once, the problem is most likely to be a bad solder connection in that area. If you can solder, resolder any connections on the board that appear grainy or have rings. That may resolve the problem. If not, update this and we'll look elsewhere for defective parts.

Dan

Sep 16, 2008 | Sony FD Trinitron WEGA KV-36HS500 36" TV

1 Answer

37 inch sony xbr with tru surround tube tv


can you turn on the tv manually? or with the original sony remote control
are you using the channel 3 or any video input to display the tv picture.
thanks

Aug 06, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony 57 Inch XBR 2001


I don't have the XBR, but on my sony, using the cable box remote, I had to go into menu/display/etc. and mark the 1080i, 720p, and 480i settings. you usually get a "if you can see this" comment if your tv accepts the settings. for standard tv i set the screen to normal, and when the upper channels go to HD, they auto go to full screen. Sounds like you are using the component cable, and also make sure you are on the video port of remote, and the the TV input. The above worked for mine. Hope it helps.

Dec 04, 2007 | Sony KP-57XBR10 57" Rear Projection...

1 Answer

Sony trinitron xbr 32"


Did you correctly select the S-Video input on the TV via the remote? In other words, if the TV is not set to look at the S-Video input then nothing will happen. You have either an "input", "source" or tv/vcr button that will allow you to select what input the tv will look at for a signal. Make sure it's set to S-Video.

Nov 13, 2007 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

Post Storm Problem


Hope is last to dye. Be calm and contact the technician with best references or Authorized Sony Service. If you need more info please advice

Apr 12, 2007 | Sony FD Trinitron WEGA XBRKV-40XBR800 40"...

Not finding what you are looking for?
Sony KV-36XBR400 36" TV Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74887 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...