Question about Kenmore 659 Electric Dryer

2 Answers

Will not start

Kenmore elite-oasis -check lint screen come on remove and clean,
Reinsert and still will not come on.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We just had the same problem. No error code. It would run for less than 2 seconds then shut off. We had a Sears repairman come out and we found out the wiring in the house we just moved in was not right.

Service repairman checked the dryer thoroughly and found no problem with the dryer. Then he checked the outlet and found line for heater was 122.4 V and line for motor 244.8 V and needed to be 120 V.

Electrician came out and dryer is working fine again.

Posted on Jul 29, 2016

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 359 Answers

Check breaker or fuse and be sure you have 220 volts @ dryer with volt merter

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to clean lint out of inside of Kenmore Oasis Elite dryer


Here is a "youtube" video showing how to take the dryer apart. Right around 3:20 is where you need to take the plactic cover off to be ablwe to clean all the lint off.

Jun 26, 2014 | Kenmore Elite Oasis ST 7806 Dryer

1 Answer

Kenmore Elite Oasis 6806 Electric dryer with burning smell


you must disassemble the unit and clean the lint out of the heating unit area, it is lint catching fire and could be dangerous to continue using your unit in this condition. a vacuum cleaner should do well to clean the lint and the drum must be removed to do a proper cleaning

Apr 15, 2012 | Kenmore Elite Oasis 6808 Electric Dryer

1 Answer

Sears kenmore elite oasis dryer 110 67032600 check lint screen flashes doesn t heat


Hello,

Check the vent on the back. This is indicating a air flow issue. If the vent is clear ohm the heater out check it for continuity.


You can watch a video that explains how to complete this repair on your sears Kenmore Elite clothes dryer at the link below.

Sear Kenmore Dryer Video

Mar 11, 2011 | Kenmore Elite Oasis ST 6807 Dryer

1 Answer

Dryer stopped and said check lint screen


There is a lint screen,usually on top of the dryer, that pulls out to remove the lint,it is probably stopped up.

Mar 01, 2011 | Kenmore Elite Oasis ST 7809 Dryer

1 Answer

We have a kenmore elite oasis dryer.one year old.just bought from some people only had it for two days.it was in the middle of a cycle when it suddenly shut off with the code af appearing where the timer...


An "AF" code means there is a low airflow condition and the clothes may not dry properly. To remedy this, check to make sure the lint screen is cleaned off and that there is no blockage in either the vent duct that runs from the dryer to the wall or the vent hood on the exterior of the house.

PF - Power Failure - PF error code indicates a power failure during the dryer's cycle.
Press and HOLD start to continue the cycle, or press off/pause to clear display.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 26, 2010 | Kenmore Elite Oasis ST 6807 Dryer

1 Answer

I just bought a kenmore elite oasis top-loading washer. It was a floor model-i didn't get the manual. Does it have a lint trap and how to I empty it? Thanks.


You must remove the inlet hose to the pump to find the screen.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 19, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Check lint screen come on


Check the tubing the lint goes through (exhaust). This may be stopped up or clogged. There is a build up here of heat or something that is preventing proper air flow.

Dec 27, 2008 | Kenmore 659 Electric Dryer

3 Answers

Kenmore Elite Oasis Dryer with Airflow problem


same problem removed back cover cleaned lint found pulley had unscrewed and belt was off.installed pulley rev threded and put belt back on.

Mar 02, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Kenmore 659 Electric Dryer Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3069 Answers

yadayada
yadayada

Level 3 Expert

66126 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...