Question about Zenith R49W36 49" Rear Projection HDTV
I have a universal remote that my son got ahold of and got into the service menu and messed with all the numbers that are in there thay where something with "cxa215 ect.."does anyone know what the right numbers are to put back in there to get it all back to the way it shold be?
SOURCE: Double VIsion on Zenith R49W36
Your TV most likely has a convergence failure. ( common problem )
Here are some of the most common symptoms and example photos of a convergence problem
Here is a quick test....
Using your original remote go-to the tv settings then goto the convergence section.
Try to adjust the red and then the blue convergence.
You should be able to move them up, down, left, and right.
If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.
You will need to replace the convergence chips and possibly some convergence resistors and pico fuses. Its a fairly easy DIY job or you can call in a pro. If you want to do the repair yourself check the site www.TvRepairKits.com. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, email/phone support, etc.
Posted on Jun 20, 2009
Its a convergence problem. You can get complete parts and instructiosn for this fix from www.TvRepairKits.com. They put together a kit for this. I used them for a convergence problem recently and they helped me fix my set.
Posted on Feb 03, 2010
Tips for a great answer:
Oct 29, 2011 | Zenith R49W36 49" Rear Projection HDTV
Jun 18, 2009 | Zenith R49W36 49" Rear Projection HDTV
Apr 30, 2009 | Zenith IQC50H95W 50" Rear Projection...
Apr 12, 2009 | Samsung HCN4226W 42" Rear Projection...
Jul 27, 2008 | Zenith R49W36 49" Rear Projection HDTV
Jul 16, 2008 | Projection Televisions
May 17, 2008 | Zenith R49W36 49" Rear Projection HDTV
Jan 16, 2007 | Zenith R57W46 57" Rear Projection...
74 people viewed this question
Usually answered in minutes!