- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Astak Night Vision Wireless CMOS Camera is also known as a CM-818T. It is a wireless camera, that you HAVE to have the Astak Receiver, I believe 919. The camera is part of a security set that has 4 to 8 cameras and a specific receiver that receives the camera signal and saves it to a proprietary DVR. Frankly, what you have at this point without spending about $300 is a rock. If you want a cheap camera, try looking at Harbor Freight. Not that it is better or worse, but at least for under a 100 you can get a camera and a monitor that work. Only down side is that you have to hardwire it. Then again, wireless has a tendency to bleed signal. Lots of people with after market backup cameras can view your camera signal and you wouldn't even know about it. By the way, all of the sites that have a "manual" for this camera all have Non-Malware detected on them. Do yourself a favor and go buy something from a reputable person or company. Isn't your security worth paying something for? That is kind of like buying the most expensive stuff you can for a motorcycle and putting on a helmet you got from Goodwill. Just my humble opinion. Good luck.
UPDATE: I have found several of the 909 receivers on ebay for about 20 to 50 bucks, depending on which ones you select These might be useful if you were to want to try it. Good luck.
The backup battery that help the system keypad/receiver unit to operate it is low in power and it is dying and in need of a new battery replacement.Traced the system back where main junktion and overide to the system box unit is should have the battery there.This battery really easy to do a replacement.The battery it is like a similar to a motor cycle battery.
If the menu comes up on the receiver you need to register the camera push the button on the bottom left of the receiver you will have one minute to go to the camera and on the side press the same button it will be on the left side if you are at the back of the camera. It will be the second button you feel. That should fix it.
You might want to take a look at the QuickVu(TM) wireless backup camera by Trail Ridge Technologies. With no wires on the camera and a simple connection to the cigarette lighter/power outlet, this camera installs in just minutes without any technical expertise. You can find it at http://brilliantivity.com/wireless-backup-camera. Finally, a truly wireless backup camera!