Question about VIA EPIA-MII10000 Motherboard

1 Answer

Ethernet suddenly not working VIA EPIA-MII10000 Motherboard

VIA EPIA-MII10000 Motherboard. etho suddenly not working.using various linux os. wizards recognize that etho is available and live, have failure connecting to the net. wizards say failure to connect. the connection is alive and well working on my mac with no issues. have been using this mobo for many months with no problems having fun and messing with various linux distros.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need mother board driver for computer emachines t3882

Posted on Dec 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a company in the USa that sells the Via Epia PD 10000 ?


Hello this mainboard is very old i don`t think you can find it new.
But you can try ebay.
Or you can buy a used or newer/better pc for small money.

Good luck

Nov 02, 2012 | VIA EPIA PD 10000 Motherboard

Tip

Reflash Via EPIA-M 1000g BIOS when board is dead


I'm writing this in the hope that others like me can resolv their problem with the dead EPIA-M mainboard.The symptoms where.. on power-up .. it would make 2 high pich beeps followed by 2 low pich beeps..turned out that is the error code for dead BIOS.
OK so u have a dead bios and a mobo that won't boot for various reasons.. from flashing a wrong or corrupted bios or else.
Apart from the other ways to go around the problem like buying a new chip already flashed or flash the chip with a dedicated flasher u can follow on this simple guide.
You should at least have some experience in DIY in computers .
1. Find a mobo of an old  pc that uses the same socket for the bios chip.if it uses award bios even better.I used a biostar p4m800-m7a mobo to do this.
No need for it to have a hdd or something special attached to it.. power source and cd or dvd/rom will do.
2. Try to see if it boots, if all ok..
3. Get you hands on the Hiren's boot cd..burn it and boot from cd..it has in the Dos program list... in the next page BIOS/CMOS UTILITIES. Select uniflash 1.4.. i did it with the 1.4 on the hiren's boot cd 10.1 maybe if they update it it will work also.It will tell you the name of the bios chip and some details..make a backup of original chip just in case.
4.On other pc download the 109.BIN file .. the bios file known to be stable for the EPIA-M board. You can find it on some forum.. i can't remember now..I thank them by the way.Same the file on a fat32 usb key.
5.On the surogate board with uniflash started.. comes the tricky part: u have to get hold of some good tools and pull the bios chip out while it's running... don't worry, nothing will happen.
6. Pull out the dead bios chip of EPIA-M and put it in the surogate board.These steps must be done with absolute care.If you think you can't do it, wait or call a friend with more experience or get hold of the right tools
7. Now with the dead bios chip in place.. select in uniflash, rediscover bios chip.. or something like that,..can't remember well.. but you get it when you see the screen... the sst bios of the EPIA-M NOW SHOWS UP...
8. select flash bios and select the file on the root of the usb key by typing C:\109.bin.. if no hdd attached.. the key is seen as C, otherwise use letter accordingly.It flashes the bios in less that 10 seconds.. and says ok.. power off surogate mobo.. replace bios chip with original.. and enjoy now your EPIA-M mainboard again.
If you'd like to thank me or ask details..mail me at www_offspring@yahoo.com

on Jan 19, 2012 | VIA Epia M10000 Motherboard

1 Answer

Jumper mapping for via5000 epia rev.E


BIOS jumper (1x1:3) is next to the CMOS battery east and slightly south of center, Freq MHz jumpers (4 x1:2) are on the north side just west of the DIMM banks, front panel etc. jumpers (multiblock + 2x1:2) are in the South-West corner.

Sep 20, 2011 | VIA EPIA-5000 Motherboard

1 Answer

How can i find wheretoplug the on off botton in a epia ml6000 ea motherboard


I noticed this is a very small motherboard, so the control panel conector may be not identified. I just see a 16 pin conector by the lower left corner, below RAM bank and among IDE conectors and PCI slot. Try to short those pins and see if it powers on. You may begin by pins 1 and2, etc. The pin 15 should be where one is missing.
Thanks

Jan 27, 2011 | VIA EPIA ML6000EAG Motherboard

1 Answer

I pulled the jumpers off the audio pins on the


Go to this page on the via website, towards the bottom you'll find a link UM_EPIA-M_150.pdf
which is the manual for the epia motherboards

Apr 12, 2010 | VIA Epia M10000 Motherboard

1 Answer

No Bootable Devices


Hard drive is toast
You will have to change it out and reload the "OS"

Feb 13, 2010 | VIA Bootable IDE Compact Flash Reader for...

2 Answers

Ubuntu install fails at random points on via epia mII 10000 mini itx system. Memory & hard drive test OK. Tried 9.04, 8.04, alternate install - all give the same sort of results. Suspecting...


As you try to install, there should be a read-out on the screen, if not set it so that there will be as you install.
Take note of the errors. You may not have enough memory to install this OS. Try a smaller different Linux version. Look at the Ubuntu home page and ask for help.

Aug 23, 2009 | Computers & Internet

1 Answer

On my PC, video quality is not good when playing dvd movies.


Here is the link for the EPIA just look at your motherboard to figure out which one you have. Somewhere on the motherboard will have the numbers you need to figure it out. Hope this helps and don't forget to rate.

http://www.via.com.tw/en/products/mainboards/download_main.jsp

Feb 28, 2009 | VIA Technology (EPIA-800) C3 processor...

1 Answer

There are no any drivers about via m. boards forlinux


U can find via drivers for most of the os including many distributions of linux here

http://www.viaarena.com/?PageID=2


Feb 13, 2009 | VIA ECS PM800-M2 PM800 P4FSB 800 Supports...

1 Answer

VIA EPIA MII12000


Here is the link for the VIA EPIA M-Series motherboard. The manual link is on the web site.
http://www.via.com.tw/en/products/mainboards/downloads.jsp?motherboard_id=81

Enjoy!
Mike

Aug 06, 2008 | VIA EPIA MII12000 (EPIAMII12000CCM01)...

Not finding what you are looking for?
VIA EPIA-MII10000 Motherboard Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top VIA Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

David
David

Level 3 Expert

752 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you a VIA Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...