Question about Linksys SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA)

1 Answer

My phone has no dial tone.

My cordless phone has no dial tone. On the phone adapter, the phone light is not on even when i pick up my phone. I checked all connections and they are all secure. I can't figure out what is wrong.

Posted by on

  • madhubalat Jan 25, 2009

    My cordless phone had no dial tone. Light is not flashing even when the phone is connected to the adapter....

  • Anonymous Mar 20, 2014

    no dial tone

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 220 Answers

Check if the cordless works on a normal telephone line,Plug in another instrument to see if you get dial tone,light.
That's it you should know what is causing the problem.
Samir

Posted on Dec 31, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I get a dial tone?


Is the base station plugged into the phone jack on the wall?

May 17, 2014 | Swissvoice Epure Full Eco Cordless...

3 Answers

GE 900 Mgz cordless phone, model 26936GE2-C


How many handsets do you have on this system? Just the one for the base unit?

May 21, 2008 | Uniden Cordless Phone

1 Answer

Hi, I have a Panasonic Cordless phone with 2 bases. I have moved one from upstairs to the phone jacket downstairs. Our third phone worked fine until I switched two of them around. Now only the plugged...


You could plug your non-cordless phone into suspicious phone jack to see if you have dial tone-if you dont have dial tone, the line maynot be connected and you should open the jack to see if there is more than 1 cable attached. If there is more than 1 cable attached and you dont have dial tone at other end of cable the cable might be cut or shorted somewhere inbetween. You can test continuity by tying 2 wires together and test with a multimeter on resistance to see if it is open circuit or maybe even short circuit. To test for short circuit, untie the cables and you should not get a reading. If you do have dial tone when you plug in non-cordless phone the distance might be to far for receiver to pick it up(ie..greater than 10 metres). I hope this has been helpful.

Aug 26, 2011 | Panasonic Lands Phones

2 Answers

No dial tone, rings but cannot answer


Turn off the mains power at the base unit for a few seconds, then turn the power back on.

Feb 15, 2010 | Panasonic KX-TG1033S Cordless Phone

2 Answers

I pick the phone up, no dial tone. Display says


We called the phone company.....There was a problem up on the telephone pole. They fixed it, no charge.

Jan 21, 2010 | Vtech Cordless 6041 Phone

1 Answer

No dial tone in Clarity C4230 setup


if you can get dial tone with another phone, look into manual for any instructions, usually a toll free number for help. ( BEST ) otherwise take phone back for exchange. may be problem in the board.

Apr 16, 2009 | Clarity C4230 Cordless Phone

1 Answer

Uniden TCX805 Cordless "loses" dial tone


Sounds like the switching mechanism that creates the link is stuck. When you answer your phone, you allow the voltage to complete it's path and you either answer the phone or you hear dial tone. If that switch is stuck closed, even though you hung up the phone, the connection is still alive. When you try to pick the phone back up later, the connection is still closed, but your phone has already passed it's "if you would like to make a call" message and you hear no dial tone. Unplugging the power to the phone resets this switch and all is good again.....that is until it gets stuck again. I have seen this problem with phones after a near lightening strike at the house. Sounds like you need to get a new phone as I don't think this is repairable.

Dec 30, 2007 | Uniden Cordless Phone

1 Answer

Cordless receivers not working


If you have tried the phone base unit in the same jack that works correctly with your answering machine and you still cannot break dial tone, then you have a defective base unit. Jer

May 09, 2007 | GE 25831GE3 Cordless Phone

Not finding what you are looking for?
Linksys SPA-2102 NA Analog VoIP Adapter (2) FXS, (2) RJ45 (SPA2102-NA) Logo

Related Topics:

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...