- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the manual shows only 3 and 4 digit error codes
the error may be everheating or by dust build up inside, clean it?
e13 on some of their printers is ink out or low.
to a on printer test page at the printer not PC>?
per the manual, lost it?
its free at canon .com (your country told to them)
Damagecanon printers,can be identifiedfromthe number oflightsblinkinginorange.So,youcalculate,how manytimes theorangelightis blinking.ExampleE2,E3,E4,E5,E8,E9,E13,E14,E15,etc.
Problem Forthe errorcodeE13=Thefollowinginkmay haverunoutblack/color Solution Press and hold the Reset button about 10 second. E13erroroncanonpixma,occurs twice.E13forblackcartridges,andE13forthe colorcartridges
Normally, maintenace kit A and B are replaced at 150K copies. However, you can keep on truckin! Eventually the copy quality (blk lines, dirty copies) will degrade. Also, you might get fuser issues (error codes, jamming).
The E codes E1-E7 are displayed in the copy counter.To display both digits of the E code press the ENTER key.When the machine detect E13 condition E1 is displayed in the copy counter.Hold down the enter key and 13 is displayed. E 11 - Exposure lamp error.In this case check the exposure lamp continuity,the thermofuse is open or power suplly board defective. E 12 -Exposure lamp error .AC drive defective,main board defective E 13 - Zero cross signal error.Main control or DC power board defective. To clear the service code turn OFF/ON the machine.
×