Question about Duravit 0910100005 Happy D Toilet Cistern - White

4 Answers

Maybe I'm an idiot but I don't know how to get the top off of my

Duravit toilet tank

Posted by on

  • micheleski_1 Dec 27, 2008

    how do i get the top off of my duravit toilet

  • Keith Hopkin
    Keith Hopkin Jan 04, 2014

    Yes, this lid is annoying.

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The cistern lid is held down by the chrome assembly (which includes the two buttons that you press to make the toilet flush) sticking up in the middle of the lid. You need to unscrew that (anticlockwise) to be able to lift the lid off, to get to the inlet valve, etc.

If the water is running in very slowly, chances are high that the small screen filter under the inlet valve is partially blocked. Working inside the cistern, you need to unscrew the inlet valve assembly (noting the order in which the various parts come out!), then unscrew the cranked fitting just under that, to get the screen/filter.

Posted on Apr 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi,
If yours is like mine, which has the flush and half flush that make up a circle, do the following:
Press either the flush or half flush.
Lift up the other half. (It should come straight out)
Lift up the remaining half.
There should be a white plastic screw that you can then remove.

Hope this helps.


Posted on Nov 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Duravit happ d cistern - after flushing i can hear a noise like air leaking. i have taken off the lid and lightly pushing the assembly inside fixes it. any ideas what is causing this and how to fix?

thanks

Posted on Apr 29, 2009

  • Anonymous Sep 17, 2016

    I have just repaired a Fowler with this problem. JUst replace the complete Water Inlet Valve on the left side of the cictern. It screws out from the bottom. The part is available on Ebay.$15 dollars in Australia.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 979 Answers

Will it pull up on any side? There may be something catching it. Point a flashlight in between the top and tank. You may be able to see if it is attached. There should be some play in there as you try to raise it up.

Posted on Feb 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Adjust the water level in the bowl of a duravit toilet


You can't. Water level is set by the design of the trap built into the ceramic base. Can only adjust height of water in the tank.

Jan 07, 2015 | Duravit 0910100005 Happy D Toilet Cistern ...

1 Answer

How do I replace a toilet seat on duravit happy D toilet


I think our toilet is a Duravit.
Close the seat and the lid then have a look at the back of the hinges. If you can see a small hole in the back of the hinge there will be a grub screw in the hole and you can undo it with an allen key (not sure what size - you'll have to try a couple)

May 21, 2012 | Duravit 0910100005 Happy D Toilet Cistern ...

1 Answer

The hinges of Duravit toilet cover seat 006331 are broken. Where can I get replacements?


I have not been able to find a "tribeca" on the Duravit website but on the site of one of their parts distributors I found the Duravit Toilet Seat DUR 006331000. Is this your model? Starck 3

On the Duravit website this product looks very similar but not the same number.

I was not able to find replacement hinges for this model sold separately. You might consider using their Find a Retailer feature to find an outlet close to you where you might make inquiries or order hinges and/or a new lid.

Jan 17, 2011 | Duravit Tribeca US-Type Elongated Toilet...

1 Answer

Does anyone know where to get hold of a manual for installing a toilet from Duravit, please? Specifically it is the Duraplus 022901. With many thanks, Fran.


Information on your product can be found here along with measurements for installation. However there does not seem to be detailed installation instructions.

http://www.duravit.com/products/series/duraplus/toilets/toilet-close-coupled--022901_toilets_91994_useo6q3rng.html#


Suggest you review the following series of videos which provides detailed instructions on toilet removal and replacement.



Trust this is helpful.

Jan 04, 2011 | Duravit Duraplus, Two-Piece Toilet -...

1 Answer

My toilet is a duravit 1930 series model with Euro style push flusher rather than handle. Internal flushing mechanism is not traditional float ball. toilet water constantly leaks from tank into bowl...


A fairly easy ( but messy ) fix - get a replacement tank to bowl gasket and bolt kit, shut off water supply, drain tank, remove bolts ( you might have to cut, depending on your water source and minerals in your water). Remove old gasket and clean surface with 00 grade steel wool. Replace gasket, install new bolts, remount tank.
Good luck!!

Nov 17, 2010 | Duravit Tribeca US-Type Elongated Toilet...

1 Answer

How do I remove the toilet seat for duravit


You need an open end wrench or socket I believe 9/16 is the size

Nov 14, 2009 | Duravit Darling Wall Mounted Toilet White

2 Answers

My duravit toilet keeps running


I too have had this problem. No matter how i change the settings ..sooner or later the toilet starts to flow continually getting worse and worse. I have had plummers and friends etc see if they can make it stop and it is no better. I am very disapointed with it and will never ever buy Duravit again. I tried contacting them for help and got nowhere. Bad design. Waste of money.. I should have stuck with the old ball-**** system at B&Q.

Jan 31, 2009 | Duravit 001422.00.00 Vario Connector Set...

Not finding what you are looking for?
Duravit 0910100005 Happy D Toilet Cistern  - White Logo

3,051 people viewed this question

Ask a Question

Usually answered in minutes!

Top Duravit Home Experts

paulcarew

Level 3 Expert

2403 Answers

Lawrence Oravetz

Level 3 Expert

8836 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14007 Answers

Are you a Duravit Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...