See the following:
select Edit: Find (On This Page...): type in "4gb" and check through the results . . .
although SanDisk only claims 2gb support for the e130/e140, it appears that 4gb is doable . . .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The card you are trying to use is likely a high capacity sd card (SDHC). This player does not support high capacity cards, it only supports microSD cards that are non-high capacity (I think most of them are usually 2GB or less, but you can find them up to 4GB).
In my experience, every mp3 player/photo frame/etc with a card reader has a MAXIMUM memory limit for the type of card that it can read. It is possible that the Sansa player can only read 2GB Micro SD cards or smaller - and thisi nformation may not have been available when they printed the manual. If you have followed all instructions, and it still will not read the card, try switching to a 2GB Micro SD card.
If the 4gb micro SD is a high capacity SD (it will say micro SDHC on it) your player may not be able to read SDHC cards, my sansa can't because it's the 'older version' it will read 2gb and below micro SD cards though (it sucked when I found out because I had just bought a 6gb micro SDHC)
If Sansa e130 or 140 is version 1.x.x.10, SD card MUST be formatted as FAT (FAT16). Music files need to be on the root directory for better performance. I have a SD card (2 gig) formatted as FAT16 and the music plays good.
I was not able to upgrade my e130 to Version 188.8.131.52 Firmware.
Hope this helps
I have a 1GB SD card in my E130 Sansa. I had fill it up to 998MB. The only problem is that I have to leave 3MB in the flash unit. I guess it need it for constructing the Music Library. The Flash (512MB) and the SD card (1GB) are both in FAT32. I guess that it may be a problem of the SD card itself and not a problem of the Sansa. 1) Have you tried to read the SD card with a card reader (without the Sansa)? 2) Have tried formatting the SD card (not a quick format, but a real one) in FAT32 (be careful about that). talueguito