Question about Yamaha HTR-6130 Receiver

1 Answer

Getting Audio to work with our Cable Tv

We are trying to get our audio to work when we turn the receiver to DTV/CBL. We have an HDMI cable from our cable box connected to the receiver and the receiver to the TV. We have picture but the audio still comes from the TV not thru the surround sound. Can you Help?

Posted by on

  • Anonymous Jan 04, 2009

    same problem. Tv volume to low by itself and can't get audio to cable tv audio to run through surround sound system (even in just left and rt). Reciever doesn't have a coaxial cable input, and the tv has no audio out.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The HTR-6130 does not decode the audio from the HDMI inputs. It only acts as a switcher. You will need a separate audio connection from the cable box to the HTR-6130.

Posted on Jan 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connecting Digital Audio to yamaha receiver


You've cabled it correctly. But on the TV there are settings for the Digital output, Off, PCM, and Dolby. Make sure you've set this correctly on the TV, and the Receiver.

Jan 01, 2014 | Audio & Video Receivers

1 Answer

My HTR-6060 plays through the tuner and dvd but not the DTV/CBL


Digital settings need to be assigned by the receiver in the ption Menu >> Audio Select.

Check the one for the HDMI from DTV/CBL.

May 23, 2010 | Yamaha HTR-6060

1 Answer

I want the tv sound to go through my yamaha rx-v363 receiver


You can do a couple of things depending on your unspecified TV and/or cable box:

For vanilla TV stereo (at best) audio: if the TV has RCA audio out jacks, run them to DTV/CBL or TV input.

For cable box (potentially multichannel) audio, if your cable box has a digital coaxial or optical audio out, run it to one of the digital in's on the receiver.

Jan 24, 2010 | Yamaha RX-V463 Receiver

1 Answer

Sound from tuner but no other devices


The RX-V365 cannot process audio from the HDMI cables (you will still be able to hear it on your TV), you will need to run a seperate coaxial or optical cable into the audio input for the relevant component on the back of the RX-V365.

Dec 26, 2009 | Yamaha Rx-v365 A/V Home Theater Receiver

1 Answer

Yamaha HTR-5750 no sound when I turn to the DTV/Cable setting


If you are not getting sound on "Any" input except "multi channel" you have a bad DSP chip in the receiver.In short, you need a new receiver, it's a 500.00 repair. If you get sound on "All" inputs except "DTV/CBL" You need to get into the main menu of the Yamaha and select audio, toggle to input, then DTV/CBL and select "Auto". If you still do not get audio, it would be due to the version of HDMI software in your receiver. If it's under warranty, Yamaha will update hardware and software for you at N/C. If it's out of warranty, use digital coaxial or optical as your audio input for TV and run your HDMI directly to the TV. (The repair for this too would run 250-350) I hope I've covered all the possibilities. If you need further help, post a comment and I can help you more.

Aug 25, 2009 | Yamaha HTR-5730 Receiver

1 Answer

We have a Denon AVR Surround Sound receiver, a Samsung HDTV, an XBox 360, an ASD-3W Denon Ipod Dock and Klipswitch speakers with a subwoofer, center channel and too bookshelf speakers. We need help...


HDMI input connect as follows:

1. Connect an HDMI cable from the Cable box to the TV/CBL HDMI input on the Denon.
2. Connect an HDMI cable from the Xbox to the DVD/HDP input on the Denon.
3. Connect an HDMI cable from the HDMI out-put on the Denon to an input on the Samsung.
You don’t have to use the optical output from these to devices since the HDMI cable allows for the transfer of both audio and video, if you have them extra use them in addition to the HDMI cable and last,

4. On front of denon after you setup and assign your optical connections, if you use them, once you select TV/CBL or DVD/HDP as a source, press the input mode button to select auto

Jan 08, 2009 | Denon AVR588 Receiver

1 Answer

No Audio Coming Through On HDMI DTV/Cable INPUT


The HTR-6130 cannot decode HDMI audio. It can only act as an HDMI switch. To get the audio from the cable box to be output from the HTR-6130, you will need a separate audio connection (e.g. RCA cable).

Dec 28, 2008 | Yamaha HTR-6130 Receiver

2 Answers

1 front speaker and 1 surround speaker won't work on cable selection


theres probably a problem with the right channel cable or plug that connects the tv to the reciever, or the tv is set to mono audio.

May 17, 2008 | Yamaha HTR-6030 Receiver

1 Answer

Lost Audio via HDMI


Check the pins on HDMI cable at both ends. Check for bent or broken pins. If all are OK, re insert firmly. Retry

Apr 05, 2008 | Onkyo TX-SR605 Receiver

2 Answers

Playstation 3 audio connection into Yamaha HTR-6040 AV Receiver


Is Yamaha HTR-640 a receiver? Try HDMI from PS3 to receiver or Sony HDTV. If HDMI from PS3 to receiver the you need and HDMI from receiver to out Sony HDTV. You could connect everything to receiver and HDMI out to HDTV. You can not have an HDMI cable AND an optical cable coming out of the PS3, only one or the other.

Dec 30, 2007 | Yamaha HTR-6130 Receiver

Not finding what you are looking for?
Yamaha HTR-6130 Receiver Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio & Video Receivers Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

jonpoint

Level 1 Expert

4 Answers

Are you a Yamaha Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...