Me aparecio el problema p0300, p0301, p0302 y p0600

the p0300--p0301-p0302=p0303 are misfire codes and can mean needs tune up or wiring problem and p0171 is system to lean bank 1 with this code if you correct it will probably correct the misfire codes your receiving
http://www.obd-codes.com/p0171 Fixing Hesitating Car P0171 Code YouTube P0171 System Too Lean Bank 1

Replace the coil pack.

P0300-p0304 misfire on cylinder 1-4
P1399 random cylinder misfire

Try this site for misfire codes and their diagnosis:

P0308 OBD II Trouble Code

also here:

Trouble shooting misfire Code P0300 P0301 P0302 P0303 P0304 P0305 P0306...

and herea;

Title goes here

what year is your benz? what is the motor identification? 104? 112? 113? 271? 272?

P0300 - Random multiple cylinder misfire
P0301 , 302 and 304 - Cyliners 1, 2 and 4 misfire
P0351 - Ignition coil A primary/secondary circuit malfunction
P0354 - Ignition coil D primary/secondary circuit malfunction

Change...distributor cap ..spark plug wires or spark plugs

Have you had somebody clear the codes after you installed the parts.If not the codes have to be erased by using a scan tool.

P0300 is multiple misfire. The corrective action for this code would be to test your fuel pressure and the injectors. P0301, P0302, P0303 is saying in certain cylinders there is a misfire. There are two different engines so I wasn't sure which one you have and couldn't give you the correct testing procedures for the coils. P0341 is saying the camshaft position sensor readings are bad. Again I am unable to give you the correct tests to check this due to not knowing your engine size. Feel free to email me at [email protected] with detailed information about your vehicle and I will be happy to email you the testing procedures to narrow down the problem and help you solve it.

From www.hondasuv.com:

 

The P1399 random misfire along with one or more of these codes: P0301, P0302, P0303, P0304 -- indicates a problem with the valves. The B20 engines in the 1997-2001 CR-Vs are known to have problems with valves tightening and then 'burning'.

So the first question is when was the last time you adjusted the valves? If you don't know or never have, then have them adjusted. Soon...