Question about Dell PowerConnect 2016 (pct2016) Networking Switch

1 Answer

No ip adress

Ip adress was erased trying to get internet to come up. how do i get ip adress back? computer was system restored, lost ip adress

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,513 Answers

Hi,
First, at the command prompt type ipconfig /flushdns. This will purge the dns cache, then type ipconfig /registerdns. This will refresh your DHCP lease and re-register any DNS names.

After trying the ipconfig /registerdns command, wait for about 15 minutes, then check your status and see it your issue is resolved.

If not, try reinstalling your NIC drivers.
Let us know if you need further clarification.

Thanks for contacting fixya.com

Posted on Dec 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

J9400b defult ip adress


There should be no default IP address on a 2626 switch. HP Procurve switches are setup by default to get an IP address by DHCP. To execute the factory default reset on the switch, perform these steps:
  1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
  2. Continue to press the Clear button while releasing the Reset button.
  3. When the Self Test LED begins to blink, release the Clear button. The switch will then complete its self test and begin operating with its configuration restored to the factory default settings.
Be aware, using these instructions will wipe out any configuration you have on the switch

Good Luck

Jan 21, 2012 | HP ProCurve 2626 (J4900B) 24x10/100 Mbps...

2 Answers

I have 2 computers (Vista and XP). I am using Linksys 10/100 hub. The problem is I can not use the internet both computers at the same time. I can only use one computer at time. Please help me. Thank...


Then both computers are trying to use the same IP address.
Have you tryed to plug both computers in and rebooting the modem and the router, this should force it to assign new IP addresses and both should work.

Sep 05, 2010 | Linksys EtherFast 10/100 5-Port Auto...

1 Answer

While trying to set up with my WyFlyer WDB20B it lost or changed the IP address and Ican not get it to communicate with my computer. How do I reset the IP address or determine what the new one is?


shut down your computer, unplug the hub for about 1 minute. plug it back in then turn on your computer. if it still can't find it, do the same thing, but after unplugging your hub, there is a reset switch in the back, very tiny hole. press for 5 second to restore factory settings and then plug it back in and restart your computer.

Feb 03, 2010 | Networking Hubs & Switches

1 Answer

I am trying to setup up a D-Link DES-1016D, 10/100 Fast Ethernet Switch to allow 5 laptops to connect, 1 cat 5 is connected to another switch that will provide these 5 laptops internet how can i do this? I...


The Simplest Way of doing this is this:

You will need just 1 switch and 5 Straight-Through cables.

(This is Provided that your laptop will connect to the internet through another method. e.g (Though a USB Modem or WIFI) ).

Connect the Main laptop to the internet through either a USB Modem or a WIFI.

Next, Connect a straight-through cable to the LAN Port of the laptop, and the other end to one of the ports of the switch.

On the network connections page, right-click on the ethernet adapter, go to TCP/IP, and give the laptop a static IP-Address, e.g 192.168.0.1 and Subnet 255.255.255.0

For the other laptops, connect each one of them to the switch using the straight-through cables, and on their ethernet adapter TCP/IP Properties, give them different IP Adresses, but in the same subnet. e.g

192.168.0.2 and 255.255.255.0 for the 1st one
192.168.0.3 and 255.255.255.0 for the 2nd one
192.168.0.4 and 255.255.255.0 for the 3rd one, ....and so on.

Next, in the default gateway for these other laptops, put the IP-Address of the First laptop that is connected to the internet. i.e 192.168.0.1.

Also repeat the same IP Address of the 1st laptop in the Preferred DNS Server for these other ones.

Next, setup home or office network on all of them,

follow on-screen instructions and when you get to the place where you have to select the type of network setup, Just select :

"This computer connects directly to the internet........" for the 1st laptop,

For the others, select : " This Computer Connect through a residential gateway or other computer on my network.".

Then give them all the same workgroup name, and accept file and printer sharing for all of them.

In case you are using Windows Vista.
The only different things include:
When you get to the TCP/IP Place, select TCP/IPv4 and Not TCP/IPv6.

Also, When you are changing the workgroup, all you need to do is to right-click on My Computer Icon, then Properties then go to Advanced, then Select Computer Name, and change the workgroup from there and restart the computer.

What I have told you is a typical, very easy network setup, and I do hope it helps you out.

Keep me posted about the problem.

Hope it helps you out.
Good luck

Nov 20, 2009 | D-Link DES 1016D (DES-1016D) 16x10/100...

1 Answer

Ip adress confligt on 2 pc when using 5port n-way switch


try changing a different ip address on either of the two computers which have the same ip address...

Aug 20, 2009 | Networking Hubs & Switches

3 Answers

D-link cant accesed internet 4pc


Most of DSL modems are connected to PC with USB cable...
n if ur server is connected with other pc on lan .. you can use internet sharing option available in winxp.

Following are the steps to enable Internetsharing for other pcs.


How to use Internet Connection Sharing loadTOCNode(2, 'summary'); To use Internet Connection Sharing to share your Internet connection, the host computer must have one network adapter that is configured to connect to the internal network, and one network adapter or modem that is configured to connect to the Internet.

On the host computer loadTOCNode(3, 'summary'); On the host computer, follow these steps to share the Internet connection:
  1. Log on to the host computer as Administrator or as Owner.
  2. Click Start, and then click Control Panel.
  3. Click Network and Internet Connections.
  4. Click Network Connections.
  5. Right-click the connection that you use to connect to the Internet. For example, if you connect to the Internet by using a modem, right-click the connection that you want under Dial-up.
  6. Click Properties.
  7. Click the Advanced tab.
  8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection check box.
  9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
  10. Click OK. You receive the following message: When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP
    address 192.168.0.1. Your computer may lose connectivity with other computers on
    your network. If these other computers have static IP addresses, it is a good idea to set them
    to obtain their IP addresses automatically. Are you sure you want to enable Internet
    Connection Sharing?
  11. Click Yes.
The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0

let me know if it helps.

best regards,



Nov 03, 2008 | D-Link DGS-1008D 8-Port Gigabit Ethernet...

1 Answer

Shared internet connection help!!!


are you using window xp for both pc?

Aug 25, 2008 | Networking Hubs & Switches

2 Answers

Netwoking problem


computer names as to be same workgroups either windows XP or Vista & ip segment as to be same.........

Jul 02, 2008 | Compaq Netelligent 3612 (267007-001)...

2 Answers

DHCP problem and router connection


  • access 198.162.0.1 router's configuration page and set the settings IP addressing to DHCP or auto assigning the IP addresses and the DNS
  • set the router mac address to the middle option set to computer mac address
  • and make sure all the computers connected to the router and the switch is set to automatically detect the IP address and the DNS is all set to auto detect...
  • how to access XP...goto to control panel and select network connections (for vista network and sharing center, manage network connections) and right click on the LAN, select properties select tcp/ip and click properties. and selct automatically assigns IP address and DNS.

Jun 07, 2008 | NetGear FS608 Networking Switch

Not finding what you are looking for?
Dell PowerConnect 2016 (pct2016) Networking Switch Logo

Related Topics:

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Networking Hubs & Switches Experts

Jeff Caskey

Level 1 Expert

20 Answers

Sr. Pelo
Sr. Pelo

Level 2 Expert

72 Answers

1860ph

Level 1 Expert

30 Answers

Are you a Dell Networking Hub and Switch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...