Question about Compaq Presario R3000 Notebook

1 Answer

Bypass power on password

Password is not working . need to bypass  and return to factory setting

Posted by on

  • Anonymous Mar 24, 2014

    My phone was stolen I got it back they change all my info my pattern lock an the email to recover password also I need help to bypass it or factory reset it

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,179 Answers

Remove the cmos battery from the motherboard for about 5 seconds, replace & reboot. All should be reset to factory settings. Hope this helps.

Posted on Dec 27, 2008

2 Suggested Answers

  • 565 Answers

SOURCE: compaq presario r 30000 need

Power On The Power On password is set in the System BIOS options. It prevents unwanted users from accessing the computer. By default, HP does not set the Power On password. If you set the Power On password in the System BIOS options you will be prompted for it immediately after you power on the Notebook PC. If this password is forgotten, a repair at an HP certified repair center is required to reset the computer. Please contact HP to schedule a repair. This service is not covered by the warranty. Drive Lock The Drive Lock password protects the data on your hard drive through encryption. If your computer is stolen, the data on the hard drive is inaccessible without the Drive Lock password. This password cannot be reset. If it is lost or forgotten, the hard drive must be replaced. Please contact HP to order a new hard drive. This service is not covered by the warranty.

Posted on Dec 27, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to reset passeword


you have to go into setting and set to manufactures settings. look for pin hole that states reset

now if you have a password already and you setup the password already that trying to bypass the password setting you will need the password in order to get to those setting i think.

you could go to website for the manufactures look up lost pass word bypass, or FAQ section, or if technical support can help you if you done all this already .

Mar 25, 2015 | Proscan PLT7223G-K 7in Android 4GB Tablet...

1 Answer

Got a second hand imedia 51850, my friend thought she had reset the password, but it has not worked, nor will it work on her old password. She has not made a password reset disk and it will not allow


Please ask somebody for help to open the case, and locate a CLEAR CMOS jumper or switch. Unplug the power cable, than bypass it on another position for 5 seconds, and you can get back the default factory passwords, or no passwords value.
PC Servis Kompjutera Kod FONTANE Popravka Odrzavanje Laptop Racunara

Apr 22, 2014 | Packard Bell Computers & Internet

1 Answer

My Samsung Impression A877 is lock out...... I forgot my password....... And I want to reset it...... from the phone lock screen....? Can anyone help me please!!!!


  1. Pull out the battery, and then reinstall it. Power on the phone and you should be able to access your information.

The following procedure will allow you to perform a factory reset, which would require access to the Standby Screen, and Menu. If you are just trying to access your phone, reset the battery.

To reset the handset to the factory default settings, follow the steps below:
  1. From the standby screen, press Menu
  2. Press Settings
  3. Press Reset Settings
  4. Press on any of the following to check their boxes:
    • All: Sound Profiles, Display & Light, Phone and Alarm settings will be returned to default values
    • Sound Profiles: Only sound profile settings will be returned to default values
    • Display and Light: Only display settings will be returned to default values
    • Phone: Only phone settings will be returned to default values
    • Alarms: Only alarm settings will be returned to default values
  5. Press Reset
  6. Enter the password default password is "0000", then press OK
  7. If prompted, Enter the password again to confirm then press OK
  8. Press Yes to Reset the handset's settings to the factory defaults

Mar 01, 2011 | Samsung SGH-A877 Impression Cell Phone

1 Answer

I have an HP iPAQ 6920 with a Keypad Security Lock Code. My son while playing with the phone repeatedly entered the wrong code and now it's not accepting my original code. Also there's now a 2m 08s...


Welcome to Fixya

Passwords are encrypted type. There is no special code that you need to enter to bypass the password for this unit. The only way for you to use this unit again is to do a Hard Reset. Meaning everything will be back to original factory state. If you decide to do that, then please follow the procedure below:

A clean reset clears all user-installed settings, programs, and data, and restores
your HP iPAQ to factory settings.
To perform a clean reset and return your HP iPAQ to factory settings:
1.Press and hold the Answer/Send, Power, and End Call buttons.
2.While holding these buttons, use the stylus to lightly press the Reset button on the bottom of the HP iPAQ until the device restarts.
3.When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button.
The HP iPAQ restarts and powers on.

Thank you for using Fixya!

Dec 24, 2010 | HP iPAQ hw6920

2 Answers

Need help television, asking for a password. I don't know the password is there away to bypass this function?


Try 0000.

I think this is the factory default password for Hisense TVs. If not, also try 1234, 1111, 2222, 3333, etc. If you set a password and forgot it, you will need to reset the TV to factory default / shipping condition.


Please rate this solution if you find it helpful. Thanks.

Nov 02, 2010 | Hisense Televison & Video

1 Answer

I can't remember the password to unlock my Lenova laptop. Is there any way to bypass?


hi dbcaloha, one way of bypassing the password is to power drain the pc.

Turn off the pc, unplug cables, remove the battery , press and hold the power button for 5 seconds, replug cables and reinsert battery.

Turn on the pc and check if it bypass the password, otherwise your system needs to perform factory reset...

Hope this helps...

May 09, 2010 | Lenovo 3000 G530 Notebook

1 Answer

My tv set comes with a menu password of 1111 from the factory as stated in the users manual; I have never used the menu lock nor change the password; today the tv demands the pasword to access the menu and...


try different passwords, i had this issue with my cell phone, manufacturer said code was 1111 but it was set to 1234.... or check with manufacturer, maybe tv was returned and the store didn't tell you, that is what happened with my phone, i assumed it was brand new, when in reality it was not, even though it was sealed in the box.

Aug 20, 2009 | Hisense LHD3204US 32 in. LCD HDTV

1 Answer

Samsung sgh-A727 and I cant remember the power on password


To reset the handset, to the factory default settings, follow the steps below:
  1. While in standby mode, press the left soft key for Menu
  2. Select Settings (9)
  3. Select Reset Settings (10)
  4. Highlight, using the navigation keys, any of the following:
    • All: Phone, Display, Profile and Alarm settings will be returned to default values
    • Phone Settings: only phone settings will be returned to default values
    • Display Settings: only display settings will be returned to default values
    • Profiles: only profile settings will be returned to default values
    • Alarms: only alarm settings will be returned to default values
  5. Press the center navigation key to check the box(es) of reset settings
  6. Press the left soft key for OK to set the Reset
  7. Enter the password, using the keypad, default password is “00000000”
  8. Press the left soft key for Confirm
  9. Enter the password again to confirm, using the keypad
  10. Press the left soft key for Confirm
  11. Press the left soft key for Yes to reset the handset's settings to the factory defaults

Mar 11, 2009 | Samsung SGH-a727 Cellular Phone

1 Answer

Compaq presario r 30000 need to bypass power on password    password is not working . need to restore to factory setting


Power On The Power On password is set in the System BIOS options. It prevents unwanted users from accessing the computer. By default, HP does not set the Power On password. If you set the Power On password in the System BIOS options you will be prompted for it immediately after you power on the Notebook PC. If this password is forgotten, a repair at an HP certified repair center is required to reset the computer. Please contact HP to schedule a repair. This service is not covered by the warranty. Drive Lock The Drive Lock password protects the data on your hard drive through encryption. If your computer is stolen, the data on the hard drive is inaccessible without the Drive Lock password. This password cannot be reset. If it is lost or forgotten, the hard drive must be replaced. Please contact HP to order a new hard drive. This service is not covered by the warranty.

Dec 27, 2008 | Compaq Presario R3000 Notebook

2 Answers

Power-on-password


Hi, Kelly.

To resolve this issue I suggest you to clear your cmos jumper settings. Importantly by doing this, ur settings will be loaded to the default (Factory settings) there you can disable the password prompt. For further information plz get back to us.

Oct 19, 2007 | Computers & Internet

Not finding what you are looking for?
Compaq Presario R3000 Notebook Logo

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...