Question about QPS QSIPBL2 Network Camera

1 Answer

Blank screen i have installed my webcam but it just comes up a blank black screen, no image of me or anything? anyone no how i could fix this?

Posted by on

  • Christopher Sherwood
    Christopher Sherwood May 11, 2010

    Could you please tell me the operating system you are using;

    eg, XP, Vista etc


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i stop the webcam from just going black when i go on webcam it doesnt show anything just a blank black screen


hello Middleton, what kind of notebook do you use and also the driver for the web cam? was it the one that came with your notebook or you installed a different one?? i need to know so i ll be able to help you. for the main time try reinstalling the web cam software after uninstalling it, most notebooks (if hp) uses cyberlink youcam get a different youcam driver to install and see what happens. i sure hope its not a hardware problem

Dec 25, 2010 | HP Webcam for Notebooks

1 Answer

Hi, I am using Sony Vaio VGN-NW20SF/S (purchased 7 months back). I am encountering strange problem with my webcam since past 2 weeks - a) Webcam when used with Skype / Gmail / Windows live...


Run this diagnostic software and see if it picks anything up

http://www.download32.com/webcam-diagnostics-d35065.html

If highlights a problem with Microsoft DirectX .
This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11
To start the DirectX Diagnostic Tool, click 'Start', click 'Run', type........ dxdiag ........in the Open box, and then click OK
Run through the tabs checking the 'notes' windows for information
The version will be shown on the 'Systems' tab




Sep 19, 2010 | Sony EVI-D100 Webcam

1 Answer

Multiple images on the test.


The multiple images were probably selected from your 'Video Effect' menu
Launch the logitech toolbar
Click the "Quick capture" ( 2 reel clips picture ) on the toolbar to start your webcam and test your drivers are working ok
If you have muliple images, keep the webcam running and click on the video effects ( 2 theatre masks ). Ensure no effects are selected and finally trim the image by selecting 'Settings' ( 2 gear wheels ) and fine tune your image. Use the Advanced tab to change the mirror images if necessary

Dec 13, 2009 | Logitech Webcam

1 Answer

I installed Intex IT 305WC webcam but I cannot see any image only blank screen. Pl help


Hi..

If you can not see the image and it is always black. Look at your cam the lens of your cam is close you need to open it. After that try to view your cam.

Tell me if it is ok!

Regards

ICmanServer

Aug 02, 2009 | Computers & Internet

3 Answers

4 black and white images on screen


you need to check device manager and uninstall old camera driver
Then restart system
if you still have a problem then back to device manager uninstall new cam and then restart and reinstall
yes more then likely conflict
please let me know if this has solved

Feb 11, 2009 | Logitech Webcam

1 Answer

Black screen on receivers end


What it sounds like is that you have not set up the Video option in your Messenger or Skype program. If this hasn't been done, it will not broadcast your image . It would help if I knew what Messenger you using. This way I can send you directions to setup the camera so it will broadcast. Personally, I'd use Skype and its free to use unless you make phone calls on the computer.
Hope this helps. Bud.

Nov 15, 2008 | Philips SPC700NC Webcam

1 Answer

Multiple screen coming up in black and white also flickering on and off


I have a logitech quickcam E3500
I have 4 black & white images

I tried downloading older and newer versions of the software, no joy.


From the logitech site, I found this fix:

Go to Start>Run, type "dxdiag", wait for the application to show, then go to the "Display" tab and disable Direct3D acceleration or Directdraw acceleration. Exit. That's all.

I tried it and it works a treat.

May 16, 2008 | Logitech QuickCam Pro 5000 Webcam

1 Answer

Webcame image


Hi , open the properties select option to full screen .

Jan 27, 2008 | Philips SPC700NC Webcam

1 Answer

Only black and white!


I have the same problem. I instaled the driver with lot of problems but I made it work. Only in (black and red).
Who can help us

Dec 09, 2007 | Logitech QuickCam Pro 5000 Webcam

Not finding what you are looking for?
QPS QSIPBL2 Network Camera Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top QPS Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

k24674

Level 3 Expert

7993 Answers

Kirk Augustin
Kirk Augustin

Level 3 Expert

2019 Answers

Are you a QPS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...