Question about Sony FWD-42PV1 42 in. HD-Ready Plasma Television

1 Answer

I need to know how to hook up a nintendo wii to my sony fwd-42pv1 plasma. I also have a problem with green pixels in dark areas of my picture

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

This is pretty easy. Just buy the cables that have S-Video connection. Then plug the wii into the S-Video in on the left side of the monitor. Plug the Audio cables to your reciever or speaker in port on your sound system. Or, the other option is to Find or get a BNC to RCA adapter and use the RCA cable that came with the wii. My TV came with the BNC to RCA Adapter. The BNC location is on the left side of the tv, just above the S-Video connection. Then just change the input selector till you get the right input.

Posted on May 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my Sony FWD-42PV1 intermittenly black out?


if the tv blacks out and the light in front stays on its the backlight going out...my first vizio did it within 3 mos of purchase had to send in and they ended up sending whole new tv

Sep 11, 2012 | Sony FWD-42PV1 42 in. HD-Ready Plasma...

1 Answer

I have a Sony fwd 42pv1...there is no picture or sound but the sreen does come on


D/A board should be suspected. Power supply regulator is OK. Seek tech support. This is a skilled work.

Jun 06, 2012 | Sony FWD-42PV1 42 in. HD-Ready Plasma...

1 Answer

My ten year old sony plasma tv has vertical herring bone lines no picture just color lines. Is my picture tube gone.


If its 10 years old boards and or parts will likely not be available--average life on Plasma and LCD sets is 3-5 years.

I would retire it--recycle it and buy a new set.

May 16, 2012 | Sony FWD-42PV1 42 in. HD-Ready Plasma...

1 Answer

My sony plasma fwd 42-pv1 color tube has broken how do I go about fixing it?


If some kind of color smearing or pixels doing that this set has not color tube and only boards that can be purchased and tried for the issue--could even be the power supply board in the set--too vague a description for more of an answer--ie: does it do it all the time or on rear inputs etc---sound not important with this issue.

It sounds like the repair center was giving you a story.

If you call Sony with the model number and describe the issue (you want to talk to a tech) they will know from their database if this is a known issue or not.

Mar 29, 2012 | Sony FWD-42PV1 42 in. HD-Ready Plasma...

1 Answer

I have a Sony fwd 42pv1 tv and every time I turn it on there is no picture. Like you can hear it click when it turns on and the LED is green but no picture. And when I turn it off it clicks and the LED is...


This is more then likely the power board. I have a complete board set that I will sell you for $150. The screen I had was bad so I just removed all the working boards. They are all like new. If interested email me at theetrader@hotmail.com

Aug 14, 2010 | Sony FWD-42PV1 42 in. HD-Ready Plasma...

1 Answer

Hi I have a Sony FWD 42PV1 Plasma. It has just stopped working. The LED shows green light when powered on and switches to red after few seconds without showing anything on the display. I have checked the...


Hello,
Your power supply board is dead, u know basic electronics’ and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Take care.....


Aug 11, 2010 | Sony FWD-42PV1 42 in. HD-Ready Plasma...

1 Answer

Green and red dots? it's fixable?


You have dead pixels on your flat screen.
I think best way is call manufacturer. Hoping they'll fix it for free.

Dec 26, 2009 | Sony FWD-42PV1 42 in. HD-Ready Plasma...

1 Answer

Sony FWD-42PV1 -


I diagnosed the same problem on my FWD-42pv1 as a problem on the Y-SUS board. The fuse on that board was blown, and the board itself was bad (replacing the fuse was not enough to fix it). The symptoms were exactly the same - the LED cycling red/green, and then finally stuck at red.

With a new Y-SUS board, the TV has been working fine for a couple months.

Jan 26, 2008 | Sony FWD-42PV1 42 in. HD-Ready Plasma...

2 Answers

Sony Plasma 42 fwd-42pv1 interference / spots


thats a defective light engine..............new tv buddy..............its a known sony problem..........dont listen to thier b.s.

Dec 18, 2007 | Sony FWD-42PV1 42 in. HD-Ready Plasma...

Not finding what you are looking for?
Sony FWD-42PV1 42 in. HD-Ready Plasma Television Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Flat Panel Televisions Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Paul Bade

Level 3 Expert

1392 Answers

Are you a Sony Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...