Question about Janome Memory Craft 9000 Computerized Sewing Machine

1 Answer

I need to replace the metal bar that snaps onto the presser foot.

I can't find the metal attachment that screws onto my Janome 9000 Memory Craft and snaps onto the presser foot. Where can I purchase a new one? I had to remove it to attach the free motion foot, but must have left it behind at the sewing shop. Now I need to replace it, but can't find anywhere to purchase it.

Posted by on

  • Jeremy
    Jeremy May 11, 2010

    Is the machine a low shank or high shank?

  • Anonymous Mar 18, 2014

    Need a replacement presser foot

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Janome Master
  • 1,388 Answers

If you go to the Janome website of your home country they will have a dealer locator page where you can find your nearest dealer.
Explain the problem and they will be able to order the replacement part for you.
You may find that parts availability at this time of year will be restricted as many businesses and suppliers close for several weeks.

Posted on Dec 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need instuctions on using different presser foot for ja nome schoolmate


Please add a comment with the specific model of Janome Schoolmate sewing machine.

Fpr the Janome Schoolmate S-3015, make sure that the needle is fully up and raise the presser foot. Then press the red button on the back of the presser foot holder to have that foot drop off. Set the pressure dial to 3 before attaching the new presser foot. For snap-on feet, align the pin of the presser foot (the horizontal bar in the middle of the foot) under the presser foot holder. Lower the presser foot holder (using the presser foot height lever) until it locks onto the foot.

For the zipper foot, you need to fit the rear pin on the foot into groove at the back of the presser foot holder. Then lower the presser foot holder onto the zipper foot.

These are shown on page 11 (14 of the PDF) of the manual. You can download the manual here: http://janome.com/en/machines/sewing/schoolmate-s-3015/ . The direct link to the manual is http://janome.com/siteassets/support/manuals/school-models/schoolmate3015.pdf .

For the S-7330, you need to again raise the needle and the presser foot. Press the lever towards (it moves slightly up, not down) the presser foot holder. Then line up the pin on the foot under the presser foot holder and lower the presser foot holder onto the foot so that it locks. This is also in that sewing machine's manual, here: http://janome.com/siteassets/support/manuals/school-models/inst-book-s-7330esf.pdf . See page 14 (18 of the PDF).

I hope this helps.

Cindy Wells

Dec 21, 2016 | Sewing Machines

1 Answer

How do I fix the following problem with my Janome MC9000 sewing machine?


Unfortunately you are probably not going to be able to fix this.
It needs a sensor adjusted (probably), or a component replaced.

Sep 25, 2014 | Janome Memory Craft 9000 Computerized...

1 Answer

HOW DO I ATTACH PRESSER FOOT G TO MY MACHINE??


there are 2 type of presser bar foot clamps
one allows you to snap on the foot--raise & then lower the presser foot holder until the cut out is directly above the pin on the foot,,as you lower the presser foot holder the presser foot will automatically engage when put down on the pin area

the second is a shank & foot combined & there is a screw on the presser bar,,unscrew it some & put the shank up around the screw & retighten the screw

Nov 24, 2010 | Janome Memory Craft 5700

1 Answer

Lost embrordry presser foot


If you haven't already solved this problem, they are easy to get from a janome dealer

May 10, 2010 | Janome Memory Craft 9000 Computerized...

1 Answer

How to put on presser foot "p" to embroider


Not shure you can embroider on an MC4000, i think this is only a sewingmachine.

But to change presser fot:

If it a "snap on" foot, when foot lifted, press the "button" on the back of the needle bar (on the bottom) this would release the presser foot.

If is a large foot, you have to unscrew the screw on the left side of the needlebar, and change the whole foot.

Jun 21, 2007 | Janome Memory Craft 4000 Sewing Machine

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

176 Answers

Irene Tulloch

Level 2 Expert

458 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...