Question about Nintendo Game Boy Advance SP Console

2 Answers

I want to change the shell on my gba sp but i cant figure out how to take it apart. have the back off on both top and bottom , now what?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 99 Answers

Fiend your solution direct from nintendo. Here is your solution....
i want to change the - 1e23fc4.jpeg 38d3fec.jpeg

http://www.nintendo.com/wiiconsole/prob676ijt65/solution

a-53

Posted on Jul 23, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Ok you need to remove the screws from the inside that hold the main board to the shell once the board has been removed you will have to remove a ribbon connector from the board (this connects to the screen so note how it goes into the connector.) you should then see one more screw up towards the top of the shell romove this screw and gently pull the ribbon through the slot in the shell and voila shell removed. reverse instructions to put new shell on.

Posted on Jan 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Taking apart the Dell Vostro 3500


Hello,

You may remove the bottom case by following the instructions mentioned in the link below:

http://downloads.dell.com/Manuals/all-products/esuprt_laptop/esuprt_vostro_notebook/vostro-3500_service%20manual_en-us.pdf

Note: Please refer to the index for specific instructions.

Hope this helps..

Jan 17, 2012 | Dell VOSTRO 3500 Notebook

1 Answer

I need to take apart my Brother XR-52 sewing maching to replace the spool pin. I have removed all the screws and cannot figure out how the case comes apart. Thank you.


XR-52 (and probably similar) has 9 screws on the back and bottom that needto be undone - be sure to keep track of which screw goes where becausethey're almost all different. One other screw is under the "nose" piece which holds the front shell to the back - it just needs to be loosened. After you haveremoved the 9 screws and loosened the one I mentioned you start at the bottom and pry apart carefully of course, noticing that the last part comes apart at the top where the three wheels go thru the back shell. In order to take off the front shell you need to remove two more screws, also fairly obvious. Reassembly is opposite order being sure when you get ready to put the back on that you align the three wheels at the top first, then work down to the bottom, replacing all the screws. That's really it - not rocked science. Just be sure not to over-tighten screws going into plastic. Have fun!

Feb 27, 2011 | Brother Sewing Machines

1 Answer

Replacing a cracked lcd screen on a GBA sp ags 001


How comfortable are you with opening you GBA? This website below is a site that I found to purchase a new screen. All you need to do now is to figure out how to open and remove the old screen. The rest should be a snap.
http://store.videogamecentral.com/gbareplscreen.html

Feb 25, 2009 | Nintendo Game Boy Advance SP GBA Red...

2 Answers

Instructions to replace hinge of GBA sp


Your better off just trading it in and getting a DS. The only thing I can think of is use something sticky (like honey or corn syrup) and let it set up. That will at least give it some resistance. Sorry couldn't be more helpful.

Feb 22, 2008 | Nintendo Game Boy Advance SP Console

1 Answer

GBA SP Backlight not working


The Back Light is an led under the frount of the display.
you might try to see if it geting power or bad.

Sep 14, 2007 | Nintendo Game Boy Advance SP Console

3 Answers

Will not play SP games


Did you clean the contacts on the game as well as the system? You may also try setting the GBA back to it's factory settings by turning it on and holding down L,R,A,B and Start

Sep 09, 2006 | Nintendo Game Boy Advance SP Console

Not finding what you are looking for?
Nintendo Game Boy Advance SP Console Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

892 Answers

phil

Level 2 Expert

567 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...