Question about KitchenAid KFP750 Food Processor

2 Answers

I am unable to remove the disc stem

I was grating soap in my food processor.  It stalled , and I cleared it.  I went to empty the bowl and have not been able to remove the stem.  I am afraid to pull too hard.  The food processor still works properly. because I can not remove the stem I cannot remove the bowl.  I have used a fair amount of pressure trying to remove the stem. 

Posted by on

  • xianz Jan 04, 2009

    I have the same problem of unable remove the disc stem from KitchenAid KFPW760 food processor. After using the disc stem with a slicing disc, the disc stem could not be taken out. Thus I couldn't remove the bowl. Please advice how to fix the problem.

    Thanks!

    Xian


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My disc stem got stuck. I added boiling water to the bowl and left it a few minutes. After some jiggling of the stem it came off.

Posted on Nov 29, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 36 Answers

There is no mechanism to lock the stem onto the base of the KFP750. It's just held on by gravity, so you're not missing anything simple!

It's possible that the soap dust got in there and glued in on. Take a blow dryer or very hot rag (use tongs!) to the stem to see if you can soften the soap, then pull up the stem.

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blade of cusinart dlc 7 superpro food processor will not spin when food is in the bowl- works when no food is in it. Is it is the stem? How do I replace it?


It'll probably cost more to fix than replace. If you have a collection of blades, maybe find one in working order on a shopping site and meld the two together. Happy hunting! Happy New Year!!!!

Jan 01, 2015 | Food Processors

1 Answer

Hi there, my dough blade won't come out from my fp2500mc wide-mouth food processor. Is there's anything that I can do. I've tried everything but it won't come out


i have had this same problem and unfortunately it seems that the disc stem gets so hot that it melts the top of the bowl to the blade. I finally got it out but the bowl was ruined as was the dough blade.

Mar 17, 2011 | Black & Decker Food Processors

2 Answers

Need replacement bowl for Black & Decker Food Processor CFP10


Contacted customer service and part is discontinued. Purchased a Cuisinart from Amazon.com.

Aug 31, 2009 | Black & Decker FP1400 Quick N Easy Plus...

2 Answers

Need to clean inside of handle on KitchenAid food processor


The plastic for the work bowl / handle is molded and one piece and cannot be disassembled. My best recommendation is to call Kitchenaid customer service to see what recommendations they have. Within one year warranty, they may replace the work bowl at no cost.

Their toll-free number is: 1-800-541-6390.

Jun 28, 2009 | KitchenAid KFP750 Food Processor

1 Answer

Black & Decker Food Processor F1-CFP-10 need the BLADE


I have the Black & Decker Shortcut food processor Model CFP10 and it has a broken bowl. I would prefer to replace the bowl but haven't found a source. So I would be willing to sell the good parts: Food Pusher, Food Chute/Cover; Food Fingers/ Reversible Disc, Disc Stem, Knife Blade. Make me an offer and e mail me at:
hersh@powwwer.net. I'll accept Pay Pal or certified checks.

May 16, 2009 | Black & Decker FP1400 Quick N Easy Plus...

1 Answer

Grating


Any of the disc blades require the use of the detachable stem. The official "Fine Grating Disc" (which doesn't normally come supplied with the food processor) is mainly for grating cheese, but the shredder disc that comes supplied with the food processor will do the job for you.

Here is a link to the manual:
http://www.cuisinart.com/share/man/57_man.pdf

-Tha Mp3 Doctor

Apr 25, 2009 | Cuisinart DLC-8S Pro Custom Food Processor

1 Answer

Disc stem stuck...can't pull it off.


Hey I had the same problem. This may sound primitive and stupid but it worked. Give the stem a good whack with a wooden spoon all the way around, it will come off.

Apr 13, 2009 | KitchenAid KFP750 Food Processor

1 Answer

How to attach grating/shredding blades to GE Food Centre FP22


When you remove the regular chopper blade, it should fit on top of the stem. The chopper blade must be removed to use the slicer / shredder attachments.

Jan 05, 2009 | GE Food Processor

1 Answer

I have ordered a replacement stem for my DLC-7, the stationary stem that covers the motor shaft. I'm not sure how to remove the one currently on the unit.


Remove the pusher sleeve and lid from the work bowl first, then slide the work bowl out of the locked position. At this point, the stem should be exposed.

Nov 05, 2008 | Cuisinart DLC-5 Food Processor

4 Answers

Cusinart little pro plus


I have this food processorfor years and I love it. If you need a copy of the manual go to the Cuisinart website - they have all of the maunals listed there. But, here is the instructinos for the juicer. Good Luck. Using The Juicer
Attachment
The Citrus Juicer
Attachment includes:
Strainer Basket, which
locks into processor work
bowl. It has grooved cam
on one side and smooth
locking device on opposite
side. In its center is the:
Juicer Stem Adapter,
which fits over motor shaft
of Pro Plus™.
Small cone, for lemons
and limes. It must always
be attached to Adapter
when Attachment is in use.
Slot in center of underside
fits rib on Adapter.
Medium cone, for oranges
and large cone, for grapefruits.
Both fit over small
cone.
1. Place work bowl on Pro
Plus™ base in usual way.
Hold Strainer Basket
open side up, with
locking device facing
you. Align locking device
slightly to left of locking
tab on front rim of work
bowl.
Place strainer basket on
work bowl, fitting Juicer
Stem Adapter loosely
over motor shaft. Turn
basket counterclockwise
as far as it will go, until it
clicks into position.
Turn Juicer Stem
Adapter clockwise until it
drops into position.
Check that it is down as
far as it will go on the
motor shaft.
2. Hold small cone by top
and place it over Juicer
Stem Adapter, fitting slot
over rib on adapter.
Cut citrus fruit in half and
hold cut side down over
cone. With other hand,
hold control lever in
PULSE position and
press down fruit to
extract juice. For continuous
operation, move
control lever to ON. Twist
fruit to extract most juice.
Do not allow juice to
overflow center tube of
work bowl.
To remove attachment,
remove cone from Juicer
Stem Adapter. Loosen
adapter from motor shaft
by lifting it slightly, straight
up. Hold Strainer Basket
on both sides and turn
clockwise to unlock it from
work bowl. Lift straight up.
Remove work bowl from
base and pour out juice.

Feb 03, 2008 | Cuisinart DLC-5 Food Processor

Not finding what you are looking for?
KitchenAid KFP750 Food Processor Logo

890 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Processors Experts

xalint1
xalint1

Level 2 Expert

150 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Ross Keen

Level 3 Expert

1130 Answers

Are you a KitchenAid Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...