Expert
(423) 303-3782
Refrigerator parts delivered overnight nationwide....
Answer
when i turn my chest freezer on i hear a click noise why wont it run.
Problem for Kenmore 14.8 cu. ft. / 419 liter Chest Freezer 13541
Can I Mount Casters with Screws into Bottom of Chest Freezer?
By scottson120 on Dec 26, 2008
I have a new Kenmore 14.8 Cu. Ft Chest Freezer and I would like to mount four casters on the bottom of the freezer. I am concerned about drilling holes and the length of mounting screws which might come in contact with possibly condenser or evaporator coils located in the floor of the freezer.
Do chest freezers have components located in the Floor? I know that there is condenser and evaporator coils in the sidewalls, but I have no clue as to the floor. I have looked all over the web and have found no pictures or info about Chest Freezer Floor construction.
Note: my chest freezer has no external condenser coils on the outside back side of the unit like some chest freezers.
I have noticed that commercial versions of this type of chest freezer do have casters installed on them. any info regarding this would be greatly apreciated. Thanks! Scott
Do chest freezers have components located in the Floor? I know that there is condenser and evaporator coils in the sidewalls, but I have no clue as to the floor. I have looked all over the web and have found no pictures or info about Chest Freezer Floor construction.
Note: my chest freezer has no external condenser coils on the outside back side of the unit like some chest freezers.
I have noticed that commercial versions of this type of chest freezer do have casters installed on them. any info regarding this would be greatly apreciated. Thanks! Scott
Comments:
Dec 28, 2008
- This is a good solution that I might implement but will require some welding which I am not equiped to do. I do have some friends that do weld and could use their help. Thanks for your input!Best Solution
posted on Dec 27, 2008
youyr best bet would be to build a frame that the casters are welded to and there are no holes in the outer shell of the freezer. some L shaped angle would work nicely for this application and then there would be plenty of support for when the freezer is loaded up with product. Be sure that teo of the casters are lockable and two in the swivel freely.
Yes
No
Popular Solutions for Kenmore 14.8 cu. ft. / 419
Questions and Unsolved Problems for Kenmore 14.8 cu. ft. / 419
Do you recommend Kenmore 14.8 cu. ft. / 419 liter Chest Freezer 13541?
Answer
Answer
I've been using a chest freezer as a frig running it with a Johnson Controls external thermostat....
(More)
Answer
the power to the house went off. got the generator started to take the load of my house. upon...
(More)
Answer
We are planning on putting it in an extra room, and the floor is carpetted.
Answer
my freezer just went out light was on in it when i opened the door and all of the contents of the...
(More)
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For Kenmore 14.8 cu. ft. / 419...:
Top Freezer Experts
Experience:
installed and repaired audio/video equipment for over 23 years at 2 colleges and 3 businesses.
Ask Me
Top Refrigerator Repair
Best Freezers
Recommended by Owners
Recommended by Owners
