Question about Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint ultima super silent wash wt 960

Stopped half way through wash, the code in the window is f-08. Can anyone help me please! i have been able to open door

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I rang the service engineer and they looked up the code, it was something to do with overheating, they are sending someone to fix it soon!

Posted on Dec 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Getting F-02 error code


wt-960 1600spin washing machine show error code f-12 each time
you switch on

Jul 21, 2014 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

My washer (hotpoint ultra silent wf840) is displaying f-08 on it's digital display, can anyone help please.


The meaning of F08 is that the heater relay is stuck or cannot be activated for some reason, this has the effect of stopping the water heater from working.
In order to resolve this the only thing you can do is to test the heater, and see if it is o/k.,if it is , then you there is not much else you can do, except call an engineer.

Feb 23, 2011 | Hotpoint Ultima WF840 Front Load Washer /...

1 Answer

Hotpoint Ultima Super Silent WF865. I'm getting error code F04 there's water in the machine and it's stopped.


Error code F04 indicates pressure switch jammed on empty.
Remove the lower rear panel of washer.
Remove the large black hose fastened to bottom of drum.
Remove and clean the plastic filter inside hose.
Remove the hose onto the pump, and check for blockage or obstruction here.
This should clear the fault
please leave feedback for my solution.
Thanks.

Dec 14, 2009 | Hotpoint Ultima WF865 Front Load Washer

1 Answer

Hotpoint Ultima Super Silent. Was & Dry


High Temperature Rise in Drying:
check fan motor & filter for blockage. basically a reduced airflow within drum unit

Dec 12, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint ultima super silent w f 840 shows fault 03


Code f03 means wash thermistor open circuit, this is normally part of the heating circuit, suggest you test heater and thermistos located in the end of the heater, and replace if necesscary. If heater o/k , then could be bad connection to control module, or broken wire, if still no joy, then call Hotpoint.
Please rate my solution.
Thanks.

May 30, 2009 | Hotpoint Ultima WF840 Front Load Washer /...

2 Answers

Cant find filter on my hotpoint Ultima


Good luck. All modern washers that I know dont have the filter you need. If a clean out is needed you will have to clean out the pump.

Jan 26, 2009 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

Hotpoint WT965 ultima fault code F05


I have a ultima WMD940 won't drain and comes up code F05. Please can you help my washing is piling up

Aug 27, 2008 | Washing Machines

1 Answer

Washing machine falt


hiya
i think this is either the heater or the heater relay on the pcb, i would suggest givin hotpoint a ring though as the machine may come with a 5 years parts warranty so all you will pay is the call out.


hope this helps

please dont forget to rate the helpfulness of this reply, thanks kj

Jul 04, 2008 | Hotpoint Ultima WF860 Front Load Washer

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...