Question about CTG 15 ft. Router Cable

1 Answer

Need a cable

I just salvaged a Panasonic KX-P 1624 dot matrix printer and I am looking for a printer cable and manual for it. Any ideas? Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers
Re: need a cable

Http:// You will find parallel type cables here- can't find any info on the printer, so I couldn't say for sure, but a straight-up DB25 M/F should do the trick.

Posted on May 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do i connect my compuer to my tv

You use a video cable that looks like that
The black head goes in the connector on the video card from your pc. Once that is done you enable the tv as a second monitor in Display properties.

Jun 06, 2011 | Panasonic Network Accessories

1 Answer

I am going to connect two pc's together useing a male to male usb cable,the problem I have is that one pc is xp pro and one is windows 7 64bit Home premiem. Any help would appreciated. Regards,Gary

There are several different kinds of USB-USB cables on the market. The one used to connect two PC's is called "bridged" (or "USB networking cable"), because it has a small electronic circuit in the middle allowing the two PCs to talk to each other. There are the so-called A/A USB cables that, in spite of having two standard USB connectors at each end, don't have a bridge chip and cannot be used to connect two PCs. In fact, if you use an A/A USB cable you can burn the USB ports of your computers or even their power supplies. So, these A/A USB cables are completely useless. A/B USB cables are used to connect your computer to peripherals such as printers and scanners, so they also won't fit your needs.


May 01, 2011 | Network Accessories

1 Answer

I have a number of Netgear FSM726S and FSM750S switches. During an office move some of the stacking cables went missing and I am trying to source replacements

Found some on amazon they look like the correct ones.



1 Answer

I bought 1 box of belden cat5e for LAN. when i test it with LAN tester the cables are good but when i connect it to the modem/hub it is not connecting.. please help me.. thanks..

If you've tested the cable and your not getting a link light, there is a posibility that either the port in the switch or the network card is bad.You can try moving the cable to an existing working port on the switch to see if it links up. If not then try another device like a laptop or printer with a NIC card on the cable

Sep 07, 2010 | Belden CAT5e Plenum 4Pair...

1 Answer

I am running a lot of cables from my computer to my TV, which is on the other side of the room, so instead of running cables across the middle of the room, I am running it under my house. The trouble is I...

They sell cable snappers that work with pretty much any type of cable and any size that can make the cables longer so you can more adequately hide them. You could wrap and tape/clamp them up as flat and together as possible and then just use a cover or something. I've used rugs and have bought longer cables and just extended them under furniture or made covers for the cables. I think that if you cut into your floor (assuming it's a wooden floor) you would have major trouble creating a hole big enough to extend all below the ground up to the point where you needed the other hole. It seems like more trouble than just covering up the cables. Good Luck!

Jan 05, 2010 | Network Accessories

1 Answer

Vextra 7" digital picture viewer

dear sar
i am bessnes name. sharon network & accessories
cat-6 a to z itme price . thanu
k,channdrababu. cell ; 9841952066, 044-26673003

Dec 16, 2008 | Vextra Network Accessories

4 Answers

Network cabling


Here is a gret link to get you started.

I hope this helps.


May 19, 2008 | Leviton (102-5G108-RW5)

1 Answer

Panasonic Commercial Three Hole Punch BH 780

This inquiry needs to be directed at Panasonic's warrantee department in customer service :

Panasonic is available at the following contacts :

E-Mail :


1-800-211-PANA (7262)
Call Center operating hours:
Mon-Fri 9:00 AM - 9:00 PM EST
Sat-Sun 10:00 AM - 7:00 PM EST

Snail Mail:

Panasonic Corporation of North America
Consumer Affairs Division
Panazip 2F-3
One Panasonic Way
Secaucus, NJ 07094

May 06, 2008 | Avocent 50-Ft Zip KVM Cable HD15 Male to...

1 Answer

Gps cable receiver

try here

May 29, 2006 | Marconi Systems 13 ft. Fiber Optic Network...

Not finding what you are looking for?
CTG 15 ft. Router Cable Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top CTG Network Accessories Experts


Level 3 Expert

18258 Answers


Level 3 Expert

93768 Answers

Vuk B

Level 3 Expert

636 Answers

Are you a CTG Network Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides