Question about Splendide 2100 Vented Washer-Dryer
How to vent to the outside of the RV
also says model #wdc1024M
Use 2.5" plastic pipe & elbow to replace aluminum elbow & hose with spring inside. Air velocity is higher, lint blows out without collecting.
I used wood router to remove part of exhaust connector on rear of dryer to better fit elbow. Elbow interior was smoothed to prevent lint sticking. Elbow was mounted with silicone sealant and 2 screws. Pipe was glued to elbow as normal glued pipe connection. Pipe end was cut even with side of dryer.
After Spendide was installed in RV, a union was stuck in from outside RV. Union slides on to pipe without sealant so Splendide can be removed from RV. Union better fills outside vent fitting than bare 2.5" plastic pipe. Temporary seal aroung union was made of urethane foam scraps, common shipping stuff from a computer monitor box. After 2 years of temporary, the foam is now considered permanent.
Original problem was constant lint problems in hose and slow drying. With pipe, not hose, lint is rarely cleaned and drying is much faster.
Posted on Jan 28, 2009
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 02, 2014 | Splendide Comb-O-matic 6200 Non-Vented...
Nov 17, 2013 | Splendide Comb-O-matic 6200 Non-Vented...
1-800-356-0766 #5 (503-656-2280)
Monday-Friday, 7:00am - 4:30pm (PST)
for parts and service.
Sep 09, 2010 | Splendide Comb-O-matic 6200 Non-Vented...
Aug 04, 2010 | Splendide Comb-O-matic 6200 Non-Vented...
Dec 21, 2009 | Splendide Comb-O-matic 6200 Non-Vented...
Jun 25, 2009 | Splendide Comb-O-matic 6200 Non-Vented...
Apr 02, 2009 | Splendide Comb-O-matic 6200 Non-Vented...
526 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: