When you put mem card in and press down to load, it just pops back out as if it's ejecting; so mem card won't properly load. if I close the door over mem card slot/battery slot, camera only lets me save to internal memory; it's not reading the mem card, won't load properly; brand new camera! ****!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I've had that happen before. I just started using the tip of a ballpoint pen to eject the card. Believe me, if it doesn't just slide back on, you might have to disassemble the laptop casing to put it back on...big hassle. I suggest you just use a pen, pencil or something similar to pop out the card.
The memory card slot for Nokia N73 is located at the bottom of the keypad just above the charger connector.
Before you eject the card, press the power key, and select Remove mem. card. All applications are closed.
When Remove memory card and press 'OK' is displayed, open the door of the memory card slot.
Press the memory card to release it from the slot.
Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.
I Had The Same Issue And Fixed It :o) I Have A Sony Handycam CCD F-730A 8mm. I put the tape in and close it but it would not load the tape down. It just pop back out. If I took the tape out, it works perfectly and would loaded the tape doc down and close.
1st: I unscrewed and removed the door to the tape. Where the tape can be seen. 2 screws hold it down. Without the tape inside. I Saw a Clear Small Plastic in the inside of the camera where the tape sits on each side. On Both Sides, Left and Right are clear plastic like sensors. They look Like Glass and are small.
2nd: I Cleaned them both with a Q-tip and rubbing alcohol. It Worked. The tape loaded and worked nicely.
It was strange. If i touched one of the small glass like sensors. the mechanism the loede the tape would not work. When The Glass sensor was blocked by the tape or just by my finger in front of it, it would not load. Very strange.