Question about Dynex Wireless-G Broadband Router

1 Answer

Can't setup I don't know if I have a Static IP Dynamic IP pr PPPoE I have know way of knowing. The setup also asks for my provider user name and password. I have verizon DSL and all I do is go to the internet site. I have no user name or password. I am really lost. I am trying to install a Dvnex Wireless G router Thank you, Joe Weyerstrass

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

Are you running vista or xp?

Posted on Dec 26, 2008

  • Brian Ebeling Dec 26, 2008

    oh and is this the first time you are setting up this router?
    and what is the make, maodel etc of you router?


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why i cannot factory reset username, password and ssid ap? and i just can factory reset ip ap


What are you connecting the wap-1001 to? An existing network . Does the subnet mask match it defaults to 255.255.0.0
if the p.c you plug directly into the ethernet connection of the ap has a different subnet mask it can't talk to the router. how does your p.c get its ip address is it static or dynamic via dhcp server . ip is default of 192.168.1.20 also is anything assigned 192.168.1.20 .
http://download.level1.com/level1/manual/WAP-1001v1.02_UM.pdf
the default password and user name is in the user manual

Jun 17, 2015 | Levelone Level One FreeCon 802.11G Outdoor...

1 Answer

Need to change my address


If your IP address is Dynamic,you can change it simply by resetting it.
If your IP address is Static,you can contact your Internet Service Provider[ISP] and request a new internet IP address.
You can check your Internet IP address from IP-Details.com .

Nov 04, 2013 | Wireless Access Points

2 Answers

Access point configuration


Access is easy to configure, you just need to understand basic setup you need to do and just have to find the same options on the configuration page of any wireless access point.

Things to setup.
1. Local IP Address ( You will get default 192.168.1.1 according to your device guide, still you can set different (not recommended, if not expert) )

2. Setup WAN IP-This could be dial up connection (PPPOE) or Internet IP Address provided by your internet provider.

3. Setup Wireless access point SSID, this is what you will find when you scan for wireless connection available

4. Setup security settings. You can setup WPA or WAP to protect security. Just need to select and assign key/password which you will be asked while connecting SSID

Follow the link for exact information on how to setup your Access Point
http://www.tomsguide.com/us/asus-wl-wl330,review-233-3.html

http://support.asus.com/faq/asus-faq.aspx?no=E8D3A5FD-995C-D299-0AE3-FBF28AA04DA6&SLanguage=en-us

http://www.ddp.ru/upload/images/PDF/WL_HDD25.pdf

Hope this helps

Jun 02, 2010 | ASUS WL-330G 802.11g/b (wl330g) Wireless...

2 Answers

I don't know how to reinstall the linksys access point!!! Our wireless network that we made simply disappeared, so I'm trying to re-make one. However, when I tried that with a flash drive, it couldn't work...


T
o access the Access Points Setup, and the LAN IP address has not changed, then computer must have an IP address of 192.168.1.XXX. If the Access Point is plugged in via Ethernet to a Linksys Router and the computer is also connected a Linksys router via Ethernet, then the PC should already have a correct IP address (unless the LAN IP Address of the Router has been changed). If unsure, please assign the computer a Static IP Address so it will have an IP address in the same range as the Access Points IP Address.

If the Access Point is being connected to a hub/switch/router via Ethernet, then use the cable that was provided with Access Point. If the Access Point is being connected to the computer directly, then a Cross Over cable must be used. Cross over cables can be purchased at most electronic stores.
    Remember: When ever a change is made in the Setup of the Access Point, the Apply button must be used to save the settings to the Access Point.
  1. Open a web browser (such as Internet Explorer or Netscape)
  2. When the browser opens, go to the "Address" bar and input the IP address of the Access Point.
      Default IP addresses:
    • WAP11 v2.8 - 192.168.1.251
    • WAP54G v1.1 - 192.168.1.245
  3. A "User Name" and "Password" prompt will appear, leave the "User Name" field blank and input the Access Points password (The default password of a Linksys Access Point is admin) into the "Password" field.

May 14, 2010 | Linksys Wireless-G WAP54G 802.11g/b...

2 Answers

Flashing amber modem light on belking n wireless router


Actually there is no problem with the Modem
First Get the following Information from your ISP

1 ) The Connection Type
2 ) If it is PPPoE then Get the user name and Password

Step 1 : Connect Modem - Router - Computer (Wired)

Step 2 : Open RSP By typing 192.168.2.1 on the Address Bar of the internet explorer

Step 3 : On the Left Side Under Internet WAN Click
Connection type

Step 4 : Leave the Password Blank and click Submit

Step 5 : Select the connection type as given by the ISP

Step 6 : Click Next

Step 7 : Type Username And Password for PPPoE ,Click Apply Changes

Step 8 : There is no need to type Any Host Name for dynamic Click Apply Changes

Step 9 : If it is A Cable connection then

Step 10 : On the left side Under Internet WAN Click MAC Address

Step 11 : Click Clone

Step 12 : Click Apply Changes

Step 13 : Restart the Router

Step 14 : Check the Internet Status



Jan 11, 2010 | Belkin Wireless-N Wireless Router with...

2 Answers

MTU setting


Browse to the router's setup page, should be 192.168.1.1 or 192.168.1.0 and log into it. You just have to change the MTU. Put it to 1500.
Once logged in to the router, go to :

Setup
-
Basic Setup
-
Wireless Setup
-
Internet Connection Type
Connection Type = Static IP
Internet IP Address = 192.168.0.1
Subnet Mask = 255.255.255.0
Gateway = 192.168.0.1
Static DNS 1 = 192.168.0.1
Static DNS 2 = 192.168.0.1
Static DNS 3 = 192.168.0.1
STP = Enable
-
Optional Settings (required by some ISPs)
Router Name = client-mode
Host Name = 2WIRE383
Domain Name = [empty]
MTU = Auto
Please remember to rate all users who assist you for free :)

Sep 29, 2008 | 2wire Wireless-G 802.11g ADSL Gateway

1 Answer

Installation CD


I lost my installation CD and received these instructions from the Belkin Tech Support, and was able to install the Wireless N Router with no problems.
Follow the steps given below for configuring the Belkin N router manually.
- Connect the computer to the "LAN" port on the router and connect the modem to the Internet/"WAN" port, using Ethernet cables. 
- Take a paper clip, insert the paper clip in the reset hole of the router and hold it for 15 seconds.
- The power light will flash and then come back "ON" solid, indicating that the router is being restored to factory defaults.
- The corresponding lights on the front of the router should be lit up.
- On the computer, check if you have an IP address in the range of 192.168.2.x.
- If not, specify a static IP address, gateway and "DNS" address by following the steps given in the link-
http://web.belkin.com/support/kb/kb.asp?a=2824 
- Log on to the router web interface by typing in http://192.168.2.1, in the address bar of your browser.
- By default, the password is blank.
- Click on "Connection Type" in the left hand column under "Internet WAN" heading.

If the connection type is Dynamic (cable):

- Choose "Dynamic" and then click on "Next". 
- Type in your “Host Name”, if you’re Internet Service Provider has provided it. Else, leave it blank.
- Click on "Change WAN MAC Address".
- Click on the button "Clone".
- Click on "Apply Changes". 

If the connection type is PPPOE (DSL):

- Choose "PPPOE" and click on "Next".
- Enter the user name and password given by your Internet Service Provider.
- Save the settings.
- Click on the "Home" link at the top of the screen. 

Internet Status should show "Connected" on the top right hand corner of the web page.

If the problem persists, please get back to us with the following information:

1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or static).
2. Name of the Internet service provider (ISP).

Aug 11, 2008 | Belkin Wireless-N Wireless Router with...

3 Answers

Dynamic IP address


Dynamic ipaddress - is temporary, the ip changes when you disconnect for example.

Normal, or static ip - It's the same address from day to day.

May 19, 2008 | Wireless Access Points

1 Answer

My wireless access point SMC


Thank you cgahongayire.

Follow these steps to retrieve the wireless key:

1) Connect a computer wired directly to your accesspoint.
2) Assign a static IP on the computer with the range of 192.168.2.x (x is any number from 3-253).
3) If it prompts you for a user name and a password, user name is admin and password is smcadmin and click Login.
4) Select Advanced Setup. It will give you the window for the access point.
5) Select Security under Radio Interface 2. You can see which security is set on your AP. If it is set as WPA, the shared key is your network key. If WEP, the network key across the selected key is your password.

Take note that these instructions are if the IP settings of the Wireless AP have not been changed. If it is, you have to ask what is the IP first.

May 06, 2008 | SMC (SMC2555W-AG UK) 802.11a, 802.11g/b...

2 Answers

Connecting to sky broadband


In general the Wan port of the router gets connected to the modem (box supplied by your internet service provider or ISP) where the computer used to connect and the computer connects to the switch portion of the router which often has 4 or more ports. The router has configuration options that must be set to comply with your internet service providers (ISPs) requirements. These can often be found on his support web site. If you can provide the link to the website I can assist with the search. Otherwise I will need the name of the ISP. If this ISP is cable related like Road Runner I will need the associated cable provider. I will also may need to know the country, city and state in which you are located as some ISPs have geographic differences in equipment. Depending on what that information determines I may also need to know the Manufacturer and Model of the Modem -- probably the box supplied by your ISP. It would also be helpful to know if you got the router used or new. Used routers may have been configured by their previous owner and require additional changes to new routers with factory default settings.

All of the above information may lead to the determination that maybe we must enter a static IP address into the router, maybe we need to provide for PPPoE login for the router, maybe we need to configure the modem to allow the router to perform the PPPoE login, and several other such items. This is probably not a one reply solution.

To provide detailed information concerning that I will need to know the model number of your Belkin Router.

Dec 10, 2007 | Wireless Access Points

Not finding what you are looking for?
Dynex Wireless-G Broadband Router Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Wireless Access Points Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

noti13

Level 1 Expert

15 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you a Dynex Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...