Question about Danby DWM5500W Front Load Washer

1 Answer

Horrible noise during fast spin

I have the Danby front load washer, everything works fine until it goes into the final spin cycle then the noise is horrible and wobbles all over the kitchen, it just started doing this, what could be the problem?

Posted by on

  • jbaree May 23, 2009

    Same identical issue as the other lady, except that we also had an electrical issue right before this happened -- it kept blowing our fuses. I bought it used and it worked beautifully for about a month or so -- enough for me to fall in love with it -- we're in a situation with no hot water supply so the internal heater was great. However, we found that if we selected a no heat cycle then it would not blow the fuse. I suspect we have 2 separate or maybe somewhat related issues. Please help. elaine

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Nail washer to floor or strong glue it to the floor

Posted on Dec 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung front load washer, jerks and makes noise when it first starts spinningthen it smooths out, and works fine.


on many machines that is normal, the shaking continues until the load is distributed relative evenly around the spinning drum. It is also possible it is the main bearing but I am not sure. The noise I am talking about would have been there since new. These links may help. Washer has noise during spin cycle Whirlpool Maytag Sears GHW9100LW1 Washer is Making Loud Noise
How To Fix Washing Machine Making Noise During The Spin Cycle
http://www.partselect.com/Repair/Washer/Noisy/

May 28, 2016 | Samsung Platinum Front Load Washer -...

1 Answer

I hae a Whirlpool LSR8233EQ1 Top loading washer.


If you can catch it running while in the spin cycle but not spinning ( put a butter knife or screwdriver in the lid switch hole ) and wiggle the timer knob . If it starts spinning during this process , the timer needs replaced . Sometimes though , when a washer does everything BUT spin and you hear the motor running , the transmission is the problem .

Aug 16, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Makes horrible noise during spin cycle only


The bearings have most likely gone bad. This is a very common problem with the front load washer when powder soap is used.

Jan 28, 2009 | GE WBVH6240F Front Load Washer

1 Answer

Rattling noise during spin cycle


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Nov 12, 2008 | Maytag MAH2400A Front Load Washer

1 Answer

Clothes are still soaking wet when load is finished.


Have you tryed replaceing the motor speed control. That is also what makes the machine spin.

Sep 24, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Danby spin / washer


Danby DTT420 W


Mine just stopped working on gentle cycle and will only go fast in one direction on normal. Worked fine when I put it away.... :(

May 18, 2008 | Danby DTT420 Top Load Washer

1 Answer

Whirlpool Ultimate Care Model LSR8233EQO - Loud noise during final rinse/spin


Sounds like the clutch, mi9ne works fine but is noisey when spinning, repair guy said it was the clutch.

Feb 05, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Danby washing machine noisy only during spin cycle


hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 13, 2008 | Danby DWM99W Top Load Washer

Not finding what you are looking for?
Danby DWM5500W Front Load Washer Logo

Related Topics:

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Danby Washing Machines Experts

yadayada
yadayada

Level 3 Expert

64255 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Danby Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...