What's your problem?reset my buetooth pass key on my rw420 moble printer

You're either to request a Master Key from your carrier of hard reset your device.

First reset your Yahoo password using your new phone as your recovery phone. Make a new Yahoo password, then reset all your other passwords using Yahoo email.

Kindly post the output to the command "debug client <printer MAC address>".
Can you also post the output to the command "sh interface detailed zebra".Or in case You Still Having Brother Printer Problem Then Follow Us For On: Printer Support Team

I am not able to detect bluetooth in Zebra rw420

try to full reset by *2767*3855#

Replace all low ink cartridges before attempting the alignment.
The procedure can use a lot of ink.
if this doesn't work, disconnect the power from the unit
press and hold the [#] and [6] keys
connect the power - keep holding the keys.
The unit will either display "semi NVM reset" or it will shut off.
Release the keys. If the unit shut off, press POWER to turn it back on.
The printer will whir and gyrate for quite some time
wait for it to finish...it should do an alignment at the end of the procedure.
Make sure you have PLAIN WHITE paper loaded.
The unit should pass the alignment.

you should check 1st the settings. see the manual for set-up.

To hard reset...turn the phone on while holding home and back. Follow on screen prompt. this will reset the phone to factory settings,

out of the box settings
hold home + power
once phone is on, open keyboard and hold alt first + w

you should call T-moble support. its probably the ahome app.

I don't if this matters for Windows Mobile or not but there is no driver listed for it based on the website:
http://www.zebra.com/id/zebra/na/en/index/drivers_downloads/drivers/results.html?productType=7

The problem is that Zebra printers use a PCL language to print with. Forms have to be programmed into the computer being used. Then they are downloaded into the application you are printing with.
These printers are designed for label and invoice use. The applications designed for them send the data over. They use them for delivery services to print with. I know bakery trucks use these in the vehicle. There not designed for straight text printing.
If you have ever seen label printers that they use for shipping out Fed Ex and UPS, that's what this printer does.
If you go to this link here you can get an idea as to how they are programmed:
http://www.zebra.com/id/zebra/na/en/index/resource_library/manuals.html

If you have any questions about programming forms for them, let me know. I had to go to a special school in Atlanta several years ago to learn how to do that.

No problem, First you need to turn blue tooth on in your phone, menu>settings>bluetooth(sometimes it's connection>enable bluetooth. Then you have to tell your phone to search for a device I think that's under handsfree in the bluetooth menu. To put tell your headset to look for the phone make sure it's off. Then press and hold the power key until it starts flashing repeatedly, (if your headset has a flip mic you will have to flip it open as you are holding power) The trick is putting both the phone and headet into pairing at the same time. the phone should find the headet, you need select and it will ask you for a pass code, the pass code is 0000 . Hit connect and you are good to go. Good luck, if you need more details let me know what model headset and what model RZR. (V3, V3M,V3XX) L8R