- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The reason why that happens is because after sleep mode the machine take a little while to start running all the back ground processes so your page will wait until all those processes start running then the machine will do your assignment.
Try booting into Safe Mode then go into the Control Panel and change the Power Options.
Turn off the computer, then hit the power button to turn itback on and immediately start hitting the F8 key repeatedly until you see SAFEMODE. Take the Safe Mode option and let it boot up. Safe Mode will lookdifferent to you, the screen will be darker and the icons bigger, this isnormal.Once safe mode is up click Start/Control Panel and look for Power Options.
sound like the memory modules possibly got lose or have bad contact remove and reinsert memory modules if that dont work you may have a weak battery and it may not be charging the worst senerio is motherboard going bad good luck!
This is wierd the kids played with your remote and you cannot get it out of sleep mode. Well here is somthing to try. You would take back cover off but here is the disclaimer (HIGH VOLTAGE INSIDE CAN CAUSE INJURY INCLUDEING DEATH) iF YOU NOT QUALIFIED OTAKE IT TO A TECH IF ITS SOMETHING MNOR IT WILL BE DONE WHILE YOU WAIT AND WILL NOT CHARGE YOU OUT THE YANG FOR A FEE. But if you inclined chekc the power supply unit and see if it is giving the correct current to the TV if not replace it.
My printer will not print after sitting for about 30 minutes. As soon as I turn it off and then back on the job I previously sent, prints out. I tried changing the amount of time before it goes to sleep but this does not correct it and does not seem to be related. You can hit the check mark to wake it up but it still will not print until turned off and then on.
To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation after 3 minutes when the camera is turned on (when the lens cover is open and the monitor is on). No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom button or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left on for 15 minutes, it automatically turns off (the lens cover closes and the monitor turns off). Press POWER to turn the camera on.