Question about Mitsubishi VS-50707 50" Rear Projection Television

1 Answer

Tracking on my tv Mitsubishi 50707 50in

Mhow do I fix my tv have tracking problems?please help

Posted by on

  • Anonymous Dec 28, 2008

    Our tv is doing the same thing. I can't seem to find the solution to the problem. When doing research, I am finding more and more people with the same issue. I am wondering if this may be a manufacturing problem? It seems everyone has received the same issue just recently.

  • heath a Feb 19, 2009

    when i turn on tv tracking is bad.took off front panel monkeyed with the six screw knobs thinking one would fix the tracking.wrong.what do i do.if i turn on and off after a 100 times will come in clear as a bell.but after a hr tracking problem starts over.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same tv cant fix the tracking .model 50707 mitsibishi

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture is blurry like the tracking is off? what is the fix?


Your TV is out of focus. It is difficult to mention the whole procedure of fixing of blurred picture in VS-60707. It is a very long procedure & requires some instruments for adjustment. To make it easy for you please visit the following link & download 11 files. Although you see the download for VS-45607, the service manual is also for VS-60707. http://www.eserviceinfo.com/download.php?fileid=32177
First three files are archived in .rar format & rest are schematic diagrams in pdf formats. After extracting files from the first three files go to page no. 35 & adjust the focus accordingly

Aug 13, 2011 | Mitsubishi VS-60707 60" Rear Projection...

1 Answer

Horizontal lines in the picture.


Give it time to warm up like another 10 to 15 mins i find put a tv guide channel on the screen stays pretty much the same picture, then leave the TV on" i use a 4 hour rule if i dont view in 4 hours or more i will close tv power

Oct 07, 2009 | Mitsubishi VS-60705 60" Rear Projection...

2 Answers

Picture and sound go out and remote isn't working properly


Take the original Mitsubishi remote and remove the batteries. Install new fresh batteries and then try to operate the set. Do not try to use any of the inputs that are active. Just check menu funtions with the mits remote. All kinda irrational stuff happens when multiple and universal remotes get involved. If this a model remote that has a selector switch at the top for choosing tv/sat/vcr, etc make sure it's on tv.

May 28, 2009 | Mitsubishi WS-55515 55" Rear Projection...

2 Answers

I have a panasonic PT-51DX80 that I cannot get out of "CHK 13095" mode! Please help!!! I just changed the convergence chips and had put it in CHK mode before they were changed. What conditions need to...


ERROR CHECK -- 13095 is a fatal error on panasonic tv. which is caused due to the short tracking on the convergence board.initially the board should be checked completely for any visible short tracking that can be repaired or else the convergence board needs to be replaced. you can get the replacement board at  http://www.partstore.com/

please do rate the solution.thank you for using fixya.keep updated.thanks.



May 04, 2009 | Televison & Video

1 Answer

My screen looks like the tracking off. It wount stop flickering


Some electolytics on a small regulator IC are going bad. Take it to a shop.

Apr 30, 2009 | Mitsubishi VS-60707 60" Rear Projection...

1 Answer

I have the same problem. Please advise how to fix it.


my sony kp-51ws510 is out of alignment and the colors are in 3d

Dec 09, 2008 | Sony KP-51WS510 51" Rear Projection...

1 Answer

I have a Panasonic TV witch is a combination Video and TV set. I am having a problem with the sound on my tape playbacks. I have tried cleaning the head, changing tapes and nothing is working. There is no...


Is this a HiFi stereo vcr? When you cleaned the heads, did you only do the heads on the rotating cylinder or only the fixed tracking/audio heads between the cylinder and the pich roller?

Does a prerecorded tape ( not a self recorded from that machine play ok?

HiFi vcrs default to the audio head(s) on the tracking/audio head if the HiFi heads on the rotating cylinder are dirty or damaged.

If a prerecorded tap palys fine, then the erase head circuit has failed.

If sound is weak and warbles, worse on SLP than SP, a weak VCR power supply.

Nov 06, 2008 | Televison & Video

1 Answer

Tv repair


try resoldering the vertical output IC and the horizontal output transistor. It sounds solder related

Mar 25, 2008 | Mitsubishi VS-5043 50" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-50707 50" Rear Projection Television Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1198 Answers

The Knight
The Knight

Level 3 Expert

69878 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...