Question about ASK Proxima C160 Multimedia Projector

1 Answer

Hy, having problem with to conect projektor to the computer Anybody can help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 541 Answers

The projector should have a cable similar to the monitor cable that would normally be hooked into the computer. The cables work the same and the one coming from the projector will use the same port as the normal monitor cable. Make sure that there is a good connection on both ends -sometimes one or the other get moved and the connection is lost.

Once the cables are hooked up, the projector should be turned on. Normally the projector will soon begin a startup routine and will cause an image to be shown on the screen. You can focus the image during that time.

After the image goes away you should be able to display whatever you want from your computer's software.

Normal problems in doing this are: leaving the lens cap on the projector, having a burned out bulb - once the power is turned on for the projector, it should cause the bulb to come on. Some models have a power on switch and a display on switch that must both be pushed to make the bulb light up.

Hope this helps.

Posted on Dec 26, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have prurchased an ASK M3 video-projector all includes except th video-Projektor-Software CD. Do You know if and where this CD can be downloaded?

It is the same model projector as the Infocus LP640, here's the link.

Aug 08, 2011 | ASK Proxima C180 Multimedia Projector

1 Answer

Going to hang a ep 728upside down how do i change the picture

Go to the menu option, then select SETUP, then PROJECTION, and scroll through the 4 image options.

Jun 20, 2011 | Optoma EP728 Beamer/Projektor Projector

1 Answer

I have the Sony VPL CS1 projektor and want to connect it to my tv, so that i can watch television channels on the big projektor screen, is this possible?

if your TV has video output signals for the program you are watching, then you can connect them to the projector.
otherwise you may need to get a cheap digital set top box and tune to the same tv program, and use the video output to feed the projector

May 14, 2011 | Sony VPL CS4 Multimedia Projector

1 Answer

I need to reset my projector. It is bazook after I disconnected it incorrectly from my MacBook. It now shows the grid and then it twinkles maddly and the gris reappears, and the whole sequence is...

hy , i have an optoma pk 102 projektor and i have a promblem i start the projektor , shows me the "optoma logo" and than it's starts flashing and restarting , and show again the optoma logo. i try to connect to the laptop and show me the extend monitor for 10 secounds and restarting again, how can i fix the problem,maybe i cand upgrade the firmware?.Thanks

Apr 26, 2011 | Optoma PK102 Projector

1 Answer

Mam projektor benq mp 610 taky problem ze sa my mali hral s projktorom a pita to odomna heslo nakolko som si precital manual nic tam take neni vopred vam dakujem

Poruche projektor môže byť príčinou neuveriteľného smútku, najmä ak sa to stane skôr, než veľká prezentácia. Učenie niektoré rýchle tipy pre projektor môže ušetriť čas a námahu, a pomôže vám zabezpečiť prezentáciu jede bez problémů.
Skontrolujte napájanie. Ak je projektor nie je zapnutie alebo vypnutie, uistite sa, že napájací kábel je správne pripojený k projektoru a zapojený do zásuvky bezpečne. Tiež sa uistite, že projektor je správne pripojené k počítaču.Krok 2
Uistite sa, že projektor nie je prehriatiu. Skontrolujte, či ventilačné otvory, aby sa ubezpečil, že nie sú blokované. Tiež zase projektor vypnúť po dobu najmenej 20 minút, aby ju vychladnúť.Uistite sa, že miestnosť, v ktorej používate projektor nie je príliš teplé. Niektoré projektory pracujú najlepšie v chladnejších miestností.

Jul 31, 2010 | BenQ MP610 Multimedia Projector

2 Answers

Benq Pb6240 decode 20648 13770 6789 8379

Hi, I lost password for benq pb6240hi my benq code is

Mar 03, 2010 | BenQ MP610 Multimedia Projector

2 Answers

Projector on acer

Windows is problably exptending your desktop to the projector, like a dual montiro display. Try moving the mouse to the right, outside the laptop/computer screen and see if it appears on the projector.

If that's the case, go to advanced display properties and set the output to clone instead of extend desktop.

Jun 18, 2009 | Acer PD523 Multimedia Projector

1 Answer

Toshiba with Colour fail , red colour

the filter lense of color red had discolored

Feb 04, 2009 | Toshiba TLP 260 Multimedia Projector

Not finding what you are looking for?
ASK Proxima C160 Multimedia Projector Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASK Proxima Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Are you an ASK Proxima Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides