- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The tv have a problems known as a tv convergence pictures problems,it is dead.Tv set have any colors lines like R,G,B mis alingnments,have colors shadows pictures or a 3D pictures look alike?Yes,than the tv set convergence board it is dead to causes all these pictures problems.The tv set convergence board must have to be repair like replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv set convergence board to solved the tv set covergence pictures problems.The tvs shops will cost u like $300-350 for parts and labors.
TV was working fine, moved to new home and the problem began. Picture rolls to the right, picture is fuzzy and will clear up somewhat at times. The picture will stop rolling at times also,but may be a half and half screen. Sound is fine, can you help me with this problem please.
You will also find there is colour disorientation in these areas. The reason is that your settings on the york had shifted, also it could be due to failure of the degaussing coil, or if there is any fault with the convergence inside the picture tube which could be a major fault.
Try to degauss, see the picture tube neck for any ring magnets out of alignment, also check the focussing in the rear panel which could have shifted.
Your unit has some sort
of Thermal problem either with the PSU fault, or a thermal problem elsewhere that is shutting down the Power Supply
Unit, PSU. This happens so that no further damage, and possible fire will
occur. T You need to take the unit to a reputable service
centre/man and ask for a firm "Quote" for the work to be done.
is there anything else hooked up to your tv other than cable or satellite? if no other components (dvd, vhs, etc) then you will get a snowy screen because the other inputs are for other components that are hooked up. a picture is showing on the HD input because you have cables hooked into that input.
Smoking absolutely destroys these TVs. Just like Teeth, the smoke gets inside and permenantly yellows the Light Prism. Since the Light Prism is responsible for passing light in these units, the yellowing dims and yellows the picture. There is NO fix for this.
Cleaning these is dangerous since all the parts have either a UV or Polarizing coating on them.
Again, I am sorry but this is the truth. On the other hand, try pressing the "Video" Button to see if one of these settings is any improvement