Question about Dishwashers

1 Answer

Whirlpool Quiet Partner built-in dishwasher's feeder line came loose from the fitting and flooded the kitchen. What is the best way to reattach?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 334 Answers

If you are talking about the supply line (clean fresh water) then it's best to replace it with a stainless braided hose, all the way from thew shutoff valve to the washer inlet. They can be found at lows HD for 20 bucks or so. Very easy to replace, two nuts and an adjustble wrench.

If its the drain, you can purchace a coupling from the same places.

It is rubber, and can fit 3 or 4 different size pipes. It connects unde the sink either onto the garbage disposal or the pipe attatched to the sink. it has two clamps that can be tightened with a screwdriver.

Trying to reuse old supply lines is aproblem waiting to happen.
Thats why I recommend new.

Posted on Dec 26, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool quiet partner ii dishwasher has quit working. Power is getting to the dishwasher but it is not coming on at all. There is water standing in the bottom of it and a very foul smell is present.


This dishwasher has a thermal fuse that attaches to the main control board that may have failed, it can be tested with a meter for continuity if it does not have continuity then it is your problem.

Apr 21, 2012 | Whirlpool Dishwashers

1 Answer

Whirlpool gu 980scggo quiet partner dishwasher leaking out water feed fitting on left side


probily just needs tightened if that dont work its just the rubber washer in the fill line just turn off water unhook like from the dishwasher side look inside the line [ where the threds are] you should find a rubber washer and take to hardwear store and replace... good luck. i hope this helps

Aug 13, 2011 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

WATER IS LEAKING OUT OF DISHWASHER DURING CYLE


could be one of 2 problems. 1) the rubber gasket seal has a small tear or hole... it doesn't take much. or 2) the door latch is loose or broken

Mar 13, 2010 | Whirlpool 24 in. GU3200XTP Built-in...

1 Answer

Whirlpool Quiet Partner V light flashing


most of the time this meens your heat element is burnt out.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/dude_653d05454b389bba

Feb 25, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Whirlpool Gold Quiet Partner Dishwasher - Leaking!


Hello Summers2Go! We are terribly sorry to hear of your concern with your Whirlpool Dishwasher. Please respond back to this email address Whirlpool_Reviews@Whirlpool.com with your name, reviewer name (Summers2Go), phone number, street address, zip code, model & serial number, and date of purchase on the appliance. We would be happy to assist you. We look forward to your reply.

Jun 18, 2017 | Whirlpool 24 in. GU2500 XTP Built-in...

1 Answer

RUN TIME ON NORMAL WASH IS ABOUT 3 HOURS


common failures on that usually are the heating element. Look at the botton and see if it is broken anywhere.

Mar 22, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Water not draining whirlpool quiet partner ii


Remove the drain line where it hooks into the disposal. See if the plug, which must be removed to let water thru, is still in there. I ran into this on a service call a few years back. Removed to plug and voila! Hope this helps!

Jan 13, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Quiet partner acuwash


BEST YOU GET THE ASSISTANCE OF A WHIRLPOOL TECHNICIAN.

GOODLUCK.

MOHAMED

Jun 26, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Brad Brown

Level 3 Expert

17473 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...