Question about Tomtom GO 720 GPS Receiver

1 Answer

When entering my house number (5 digit) it says "nomatches found.

I tried to enter my house # it it says "no matches found. What should I do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 54 Answers

Not all locations are in TomTom maps this is not uncommon if you live in a new construction area that is newer than about 3 yrs old you can make a favorite location by turning on TomTom and navigating through the menu and mark the location the best way to do this would be to go into the street just infront of your driveway or parking area so you can use this favorite for routing info

Posted on Dec 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i drill a hole into my keepsafe wall safe to open it?


Keep the drill motor in the toolbox, you'll likely just ruin the safe.

Go here instead: https://www.sentrysafe.com/CustomerCare/Lost_Your_Combination

There are 3 possible ways to unlock and access
the safe:
1. Factory code
(Found on the first page of the factory guide) You can
always open the safe by entering the pre-set 5-digit
factory code. This code cannot be deleted.
2. User code
If you prefer to employ your own code, you can
program the safe to open using a 5-digit user code
of your choice.
3. User pin
If you wish to give someone else temporary access
to the safe, you can program a 5-digit user pin that
can later be erased.
Programming the user code
NOTE: One (1) user code is allowed.
To add:
1. Press the Prog key , then enter the 5-digit
factory code.
2. Enter the 5-digit user code of your choice.
To delete:
1. Press the Prog key.
2. Enter the 5-digit factory code twice.
Programming user pin
NOTE: One (1) user pin is allowed.
To add:
1. Press the Prog key 2 times.
2. Enter your 5-digit user code.
3. Enter the 5-digit user pin of your choice.
To delete:
1. Press the Prog key 2 times.
2. Enter your 5-digit user code.
3. Enter 0, 0, 0, 0, 0.
NOTE: If your safe does not appear to be working,
please check batteries before calling Sentry
Customer Care.

Jul 26, 2014 | Sentry KeepSafe Combination Fire Safe 12...

1 Answer

Ak59 00104k


If you wish to buy a genuine remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have set-up codes to your TV brand, and buy that one according to availability. The first thing you have to do is, to confirm the number of digits in the setup codes to your TV brand. There are 4 digit, 5 digit, 3 digit and even 2 digit codes. You can make it sure by entering '0s' at the code enter window the TV dispays, and asks codes. Enter 'Zeros', and count how many zeros can be enterd. That number will be the number of digit of setup code, the TV/Device need. If you can enter 5 zeros, the number of digit in the set-up code to your TV is a '5' digit one, if only 2 zeros can be enterd, the number of digits in the set-up code to your TV should be a 2 digit one, and so on.. If you wish to get more details about this, try the sites linked here. http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/
Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

Jan 10, 2014 | Televison & Video

1 Answer

Daewoo dmq 1417 14 inch colour portable -no remote


0382,0281,0264,0290. Try these codes. If you wish to buy a genuine remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have set-up codes to your TV brand, and buy that one according to availability. The first thing you have to do is, to confirm the number of digits in the setup codes to your TV brand. There are 4 digit, 5 digit, 3 digit and even 2 digit codes. You can make it sure by entering '0s' at the code enter window the TV dispays, and asks codes. Enter 'Zeros', and count how many zeros can be enterd. That number will be the number of digit of setup code, the TV/Device need. If you can enter 5 zeros, the number of digit in the set-up code to your TV is a '5' digit one, if only 2 zeros can be enterd, the number of digits in the set-up code to your TV should be a 2 digit one, and so on.. If you wish to get more details about this, try the sites linked here.
http://electrohelponline.blogspot.com/ & http://electro-medical.blogspot.com/ Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

Jan 06, 2014 | Televison & Video

1 Answer

Changed battery on my 2007 streetglide and system not recognizing my fob so not starting


Yes, you do need to take it to dealership to match the fob.
BUT, to get it to the dealership, you can bypass the fob IF you know the security code.

DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Feb 23, 2013 | 2007 Harley Davidson FLHX Street Glide

1 Answer

How to set for todhiba tv


Hello
The codes for Toshiba TV with Innovage jumbo universal remote control are:
013,049,089,105,
Proceedings

1. Turn on the device that you want to set.

2. Look for the brand name under the specific device listing provided.

(Note: You will notice that some brands will have more than one 3-digit code. During the

code input process, you may have to try more than one 3-digit code that will match your

device brand and model.)

3. Aim the remote control at the device and press down and hold CODE SEARCH button for

at least 3 seconds until the red LED lights up solid red.

4. Press the device button for the item you wish to program, e.g. TV, DVD, VCR, etc. and the

LED light will blink once and then remain solid red.

5. Using the number keys, enter the 1 st set of 3-digit codes from the list. You will notice

that each number that you press, the LED will blink once. After you have entered the

3rd digit, the red LED will turn off indicating that the code was recognized for the device.

(NOTE: If the code entered was not compatible, the red LED will flash several times.

You will then need to repeat Step 3. You have 30 seconds to enter a code.)

6. After the red LED light has turned off. Press the ON/OFF key. If the device you are trying

to program powers off, then you have found the correct code. If the device does not

power off, then you will need to repeat the process again from Step 3, using another

3-digit code.
7. Make a note of the 3-digit code for future use.
OK.

Feb 28, 2011 | Innovage Jumbo Remote Control

1 Answer

I need code for rca tv


Hello
Codes for RCA with Innovage remote are:

000,003,004,005,

007,009,011,

015,048,082,092,

094,096,098,

101,102,103,107,

113,125,129,

167,179,187,188,
191,194

1. Turn on the device that you want to set.

2. Look for the brand name under the specific device listing provided.

(Note: You will notice that some brands will have more than one 3-digit code. During the

code input process, you may have to try more than one 3-digit code that will match your

device brand and model.)

3. Aim the remote control at the device and press down and hold CODE SEARCH button for

at least 3 seconds until the red LED lights up solid red.

4. Press the device button for the item you wish to program, e.g. TV, DVD, VCR, etc. and the

LED light will blink once and then remain solid red.

5. Using the number keys, enter the 1 st set of 3-digit codes from the list. You will notice

that each number that you press, the LED will blink once. After you have entered the

3rd digit, the red LED will turn off indicating that the code was recognized for the device.

(NOTE: If the code entered was not compatible, the red LED will flash several times.

You will then need to repeat Step 3. You have 30 seconds to enter a code.)

6. After the red LED light has turned off. Press the ON/OFF key. If the device you are trying

to program powers off, then you have found the correct code. If the device does not

power off, then you will need to repeat the process again from Step 3, using another

3-digit code.
7. Make a note of the 3-digit code for future use.

Feb 24, 2011 | Innovage Jumbo Remote Control

1 Answer

When i type in an address it says no matches found. any address


start with a basic address of a main st in your city and see if it finds that. be sure to separate the street name and st,ave,rd. i.e
enter in the house number 123 done.
enter in the street name bank st done.

this should come back with a street for you. if not make sure there is a map location for the street you are trying to find. a newer neighbourhood may not be listed in your gps.

Oct 28, 2009 | Garmin nuvi 205 GPS Receiver

2 Answers

Immobiliser is not turning off and not allowing the engine to start


is it a stick immobiliser?
If your vehicle does not start and the LED continues to flash while the Ignition is 'ON', this means that the Immobiliser system has not recognised the transponder stick.
Simply turn the Ignition 'OFF' then back 'ON' again. If the Status LED continues to flash, move the transponder stick closer to the key barrel until the LED stops flashing and turns 'OFF'.
If the transponder stick on the key ring does not disarm the immobiliser or the
transponder stick is misplaced, you can override the system by entering a 5-digit override number. Each vehicle has a unique 5-digit override number. This number is recorded on the
customer’s owner’s manual. If the customer loses their owner’s manual / override number, the number can be found by locating the vehicle’s Daewoo Stock Number (D.S.N). The customers override number is the last 5 digits of their D.S.N.
9748811.jpg
Overriding the system using the example 5 digit code 2,1,0,6,2
Important Note: 10 flashes of the Status LED represent the number ‘0’.
1. Remove the Transponder from the Key Ring.
2. With the system armed (LED flashing slowly) Turn the ignition ON/OFF 5 times, with the final position being off.
3. The LED will turn solid red for 2 seconds and then begin to flash.
4. When the LED flashes twice (2), turn the ignition ON. (number 2 was entered)
5. Turn the ignition OFF and wait for the LED to flash once (1) and then turn the ignition ON. (number 1 was entered)
6. Turn the ignition OFF and wait for the LED to flash ten (10) times and then turn the ignition ON. (number 0 was entered)
7. Turn the ignition OFF and wait for the LED to flash six (6) times and then turn the ignition ON. (number 6 was entered)
8. Turn the ignition OFF and wait for the LED to twice (2) and then turn the ignition ON.(number 2 was entered) The LED will turn solid red, which means the system is now overridden and the vehicle can be started. If an incorrect number is entered in, wait 11 flashes then start the procedure again.
NOTE: This is a one-event override. Once the ignition is turned off, the vehicle will passively immobilise after 30 seconds. If your 5 digit override number does not override the system, the chances are that you entered the wrong number. If this is the case, you’ll need to re-enter the override number
and try it again.

Jul 13, 2009 | 1999 Daewoo Lanos

1 Answer

Problem with entering anti-theft radio code for Honda Fit: The radio screen says: "Enter Code:" I enter the confirmed correct code, but when doing so when the actual code (all numbers) turn into letters or...


when you use the "preset keys" (the keys on the radio with numbers on them) to enter the code, each time you press a code number, a letter appears [c, o, d, e]. once the word is spelled out, from entering the correct 5 digits, the radio is reset, ready to go.

BUT if you miss a number, enter a wrong number, whatever, each number pressed, still makes a letter appear from the word "code". once the word is spelled out, by entering ANY 5 numbers, if ANY of the 5 is wrong, the radio displays a message "Error" and then a number 1 thru 10.

When you see the word "Error..."

the next preset button you push, starts the whole thing over again. The radio says "Enter code". That is when you enter the 1st of the 5 digits, the letter C appears, enter the next digit, the letter O appears, enter the next digit, the letter D appears, enter the last digit, the letter E apperas, the radio is reset, ready to go, if you got the 5 correct numbers entered.

you have 10 chances to enter the right 5 digit code. Each wrong try of 5 digits yeilds a display of "Error 1", "Error 2", "Error 3", etc 'till you get to 10 incorrect tries of 5 digits each.

If you dont get it right in 10 tries, you have to leave the radio "on" for an hour, then it will let you start the 10 tries over again.

Good luck!

Apr 26, 2009 | 2007 Honda Fit Sport Hatchback

1 Answer

Need radio code to unlock


if you have your code and need to know how to enter the code , it should be as follows .

Unlock procedure for six digit codes. Push the "Hr" button, 000 will appear in display. Press the hour button until you match the first number of your unlock code. For second two digits of unlock code press the "Min" button until numbers match. When first three digits of unlock code is entered into display, push the AM/FM button. Repeat the above process for second set of three numbers of unlock code.

if you need more assistance, post comment before voting thanks .

Jan 11, 2009 | 1996 Chevrolet Monte Carlo

Not finding what you are looking for?
Tomtom GO 720 GPS Receiver Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomtom GPS Experts

LP

Level 3 Expert

485 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

69244 Answers

Are you a Tomtom GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...