Question about Philips Magnavox 50ML8105D 50" HDTV DLP TV

Open Question

How to change the bulb inside of a flat screen lcd magnavox tv

How to change the bulb inside of a 37" lcd flat screen magnavox tv

Posted by on

  • Shahid Electronics
    Shahid Electronics May 11, 2010

    If its DLP LCD rear projection TV then it has bulb (lamp) and replacement procedure is described in its user manual.



×

4 Suggested Answers

nfandres
  • 168 Answers

SOURCE: Magnavox 51" TV Screen

try 3Dlens.com. this screen is made of fresnel lens. good luck!

Posted on Feb 03, 2007

  • 1 Answer

SOURCE: Magnavox 51" TV Screen

take the broken piece to the hardware store and have a piece of plexiglass cut the same size. thats what we did and it worked really well.

Posted on Sep 12, 2007

  • 1 Answer

SOURCE: picture has a red "haze"

the color in my tv is a little faded when theres dark scenes on cant really see picture. Red and Blue really fade into picture

Posted on Mar 04, 2009

  • 46 Answers

SOURCE: my magnavox model 50MF23ID/37 is 4yr old. tv wont

If you hear a clicking noise that sounds like the ballast trying to power on the lamp, but nothing happens, the lamp may be faulty.
http://www.discount-merchant.com/
Here you can get your lamp that most likely needs replacing.

Posted on Mar 27, 2010

Testimonial: "thank i'll try it"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I purchased a Magnavox / Phillips 50 inch tv a while back and am now told it needs a new bulb which I can not afford due too the fact of getting hurt and going on S.S.Disability and no extra income what so...


I don't know of anyone who can donate a lamp, but I have done research and you can actually purchase a lamp off of ebay for $85.99 and then have the technician install it. Here is a link to the ebay site where the lamp is located.

http://cgi.ebay.com/PHILIPS-313912877921-LAMP-BULB-50ML6200D-37-TV-/390236743138

Sep 18, 2010 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

37 INCH LCD MAGNAVOX TV WILL NOT TURN ON. MUST BE


This problems,very common in LCD tv,after the tv was in used about a year or two.The new technalogy LCD tv don't handle heat very well,not like the old CRT Tube Tvs.The power supply board tend to have bad capacitors componnents leakage,that bulges up it top or puff up gases escape,that why it take times or couples pushes to the power botton to turn the tv on.U know basic electronic's,and have soldering tools and solders?Take the tv aparts,check for these bad capacitors,that bulges,puff up in the power supply board and replaced them,than ur power will work normal again.Or tries Websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Apr 29, 2010 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

My magnavox model 50MF23ID/37 is 4yr old. tv wont


If you hear a clicking noise that sounds like the ballast trying to power on the lamp, but nothing happens, the lamp may be faulty.
http://www.discount-merchant.com/
Here you can get your lamp that most likely needs replacing.

Mar 26, 2010 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

I have a magnavox 37 in lcd television


YOU HAVE A IC INSIDE OF THE TV GOING BAD LOCATION IS 7412

Aug 24, 2009 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Picture has a red "haze"


the color in my tv is a little faded when theres dark scenes on cant really see picture. Red and Blue really fade into picture

Feb 21, 2009 | Philips Magnavox 9P6034C 60" Rear...

2 Answers

Big screen out of focus


ok you have to open the tv intill you see the 3 bulbs and the big mirror
the around each bulb is a wheel u have to turn that for the pic and focus

Jul 20, 2008 | Philips Magnavox 9P6034C 60" Rear...

2 Answers

I have a flat screen lcd 42 inch model number 37MF321D/37 and the on button just keeps flashing and the remote does nothing?


You have either a bad power supply ( a very common problem) or the inverter board that runs the back - light is bad. The power supply board will have capacitors that are leaking or puffed up looking. Same on the inverter board. If you can get a component leval repair then that is cheaper ... But most techs just replace the board. Not a do it yourself job. Expect a cost of $200.00 to $300.00

Jun 13, 2008 | Projection Televisions

2 Answers

Bad Picture on a Projection TV Magnavox 55P8288A magnavox


Change the coolant inside the CRT this will restore the color and clarity to 100% on your set.

May 25, 2008 | Philips Magnavox 51MP392H Rear Projection...

Not finding what you are looking for?
Philips Magnavox 50ML8105D 50" HDTV DLP TV Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...